How to set up Atmosphere on SysNAND on Erista (Unpatched)#


What you'll need:#


TegraRcmGUI Hekate Atmosphere & fusee SigPatches
Download Download Download Download

Setup:#


Before you start:
Make sure that your SD card is formatted to FAT32.
If you're unsure on how to do that, check this guide.

Step 1.
Note:
You can skip this step if you have a payload launcher.

  • On your pc run TegraRcmGUI_vx.x_Installer.msi.
  • Once installed, launch TegraRcmGUI. Once TegraRcmGUI is running, go to the Settings tab and click on Install Driver.
  • Once the driver is installed, create a folder named Hekate on your desktop and extract hekate_ctcaer_x.x.x_Nyx_x.x.x.zip into it.
  • Go back to TegraRcmGUI, go to the Payload tab, press the folder icon, go to the folder named Hekate that you made, and pick the file named hekate_ctcaer_x.x.x.bin.

Step 2.

  • Extract these files into the root of your SD card:
    • hekate_ctcaer_x.x.x_Nyx_x.x.x.zip
    • atmosphere-x.x.x-master.zip
    • fusee.zip

Step 3.

  • Place the file named fusee.bin in your /bootloader/payloads/ folder.
  • Create a file named hekate_ipl.ini inside of your /bootloader/ folder and paste this within the file:
    [config]
    autoboot=0
    autoboot_list=0
    bootwait=3
    backlight=100
    autohosoff=0
    autonogc=1
    updater2p=0
    bootprotect=0
    
    [Atmosphere CFW]
    payload=bootloader/payloads/fusee.bin
    icon=bootloader/res/icon_payload.bmp
    
    [Stock sysNAND]
    fss0=atmosphere/package3
    stock=1
    emummc_force_disable=1
    icon=bootloader/res/icon_switch.bmp
    
  • Create the file exosphere.ini in the root of your SD card and paste this inside (this step is needed in order to blank your prodinfo so that you can avoid getting your switch banned):
    [exosphere]
    debugmode=1
    debugmode_user=0
    disable_user_exception_handlers=0
    enable_user_pmu_access=0
    blank_prodinfo_sysmmc=1
    blank_prodinfo_emummc=0
    allow_writing_to_cal_sysmmc=0
    log_port=0
    log_baud_rate=115200
    log_inverted=0
    
  • Afterwards create a file named default.txt in /atmosphere/hosts/ (the hosts folder won't exist, so make sure to create it)
    and paste this in your default.txt file (this step is prevents you from connecting to Nintendo's servers):
    1
    2
    3
    4
    5
    6
    # Block Nintendo Servers
    127.0.0.1 *nintendo.*
    127.0.0.1 *nintendo-europe.com
    127.0.0.1 *nintendoswitch.*
    95.216.149.205 *conntest.nintendowifi.net
    95.216.149.205 *ctest.cdn.nintendo.net
    

Step 4.

  • Place your SD card back into your switch, insert your RCM jig in the right side of your rail, hold the VOL + button and turn it on.
  • Connect your Switch to your PC, and you'll launch into Hekate.
    • Make sure TegraRcmGUI is running.
    • If you have a payload launcher, then you can skip this step.
  • Select Tools then select Archive Bit - AutoRCM and pick Enable AutoRCM.
  • Once done, go back to the main menu and click on launch, and select Atmosphere CFW to launch into Atmosphere.
    • If you ever need to go into SysNAND without your CFW, select launch and then select SysNAND.

⬅️ Go Back 🦝#
Edit
Pub: Mar 17 2021 19:45 UTC
Edit: Sep 09 2021 07:38 UTC
Views: 10149