Lawn mower blades are an essential aspect of lawn maintenance. They could affect the way your yard looks and how easy it is to maintain.
To get the best lawn mower blade to your yard, consider the type of grass you're growing and the goals you have for your yard. There are a variety of blades available, each specifically designed to serve a particular purpose.
High-Lift Blades
The blades are made for the widest range of decks for lawn mowers including Exmark Triton models. They are made to the highest quality standards to ensure sharp cuts and excellent mowing results. The blades are easy to put on and have an air-flowing, smooth surface to keep grass clippings in a straight direction.
These mowers' blades create lots of suction which allows you to pull the grass up as you cut it. This results in an even and cleaner lawn finish than standard or low lift blades. These blades are ideal for bagging grass clippings, as they don't get clumped and can be discharged easily by the side chute.
The drawback of this kind of blade is that it demands a higher engine horsepower as it generates a lot of airflow in the mower deck. These blades aren't suitable for unmistakable Grass mower Blade sharpener with sand, since they circulate grit in the mower deck. This can lead to it wearing out quicker.
Mulching Blades
It is crucial to ensure that you buy the right type of mulch blades if you're looking for new ones for your lawnmowers. This can be accomplished by reading the instruction manual of your lawnmower. You may also visit the manufacturer's site to learn more about compatibility.
A different blade can cause the engine to work harder and affect its performance. Durability means the blade will last for a long time.
The most common kind of mower blade is the straight blade that works great on dry and damp surfaces. However, it isn't reliable in areas that have thick grass. They're not suitable to bag or side discharge, but they do a great job of mulching.
Straight Blades
If you are looking to replace a blade, it's important to choose one that is a good fit for the size of your mower's deck. It is possible to do this by inspecting the old blade to see what it looks like, then comparing it to the size of the new blade. Make sure the new blade has a part number stamped on it and that its center hole pattern matches the shear pins on your mower's locating holes.
The wrong blade could cause damage to the mower. The engine could be stretched and its capability to cut grass might also be affected. Furthermore, a incorrect blade could cause the mower to move.
For yards with high grass blades with the highest lift will be your best option. The blades are angled to create an incline or "lift" or curve on the edge behind the cutting edge. This creates a vertical suction and permits cutting with greater precision. The blades are also bent to prevent obstruction to the discharge chute. These blades are also ideal for side-loading and bagging.
Holes in the Blade
Mower blades are available in a variety of shapes, sizes and styles. When buying a new or replacement lawn mower blade it is important to ensure that all measurements are right, or else you can damage your equipment and cause unsafe vibration levels. The measurements comprise the length of the blade, as well as the dimensions of any holes that are in the middle.
Between the holes that are in the middle of several blades, you will find the part number. This is used to locate an OEM replacement blade or a cross-referenced, high-quality aftermarket blade.
The overall blade length is important - too short and the mower will not cut as it should, too long and the blade won't fit. The size of the center bolt hole isn't all you need to think about. Shear pin location holes in the boss of the blade must be also matched to ensure proper fitting. The measurements are used to make precise blade specifications. Blades that work with lawn mowers will then be located.