What's Holding Back The Double Glazing Repair Industry

Why You Should Trust Your Double Glazing Repairs to Local Experts

Replacing double glazing isn't an easy task to do yourself, but a glass professional can make it easy and safe. It is also worth contacting the company you purchased it from if it is still covered by warranty.

Misted windows can be made to drill to let out condensation, but this is only a temporary fix. Blown double glazing must be replaced to restore the thermal efficiency.

Broken window panes

When a window pane breaks it creates a visible gap in the double glazing that could result in draughts or moisture. These aren't only inconvenient, but can also damage your property and health. Damp environments can cause damaged frames, structural issues and other costly repairs.

A damaged window is usually simple to fix if are aware of the right procedure. Wear eye protection and gloves to protect yourself. Remove the old glass fragments. Once you have removed the shards employ a utility knife to cut through any glazing putty and metal glazing points. Once the glass is free and removed from the frame, remove it carefully. the frame.

After you have cleaned and sanded the area to remove any paint or gunk then it's time to prepare the area to accommodate the glass. Make sure to take measurements of the opening from side to side and top to bottom. Subtract 1/8 inch from both measurements to accommodate any expansion or contraction of the frame over time. This will ensure that the new glass is installed correctly.

Then, apply a cord of glaziers compound to the outside edge of your glass-frame joint. Smooth double glazing window repairs out with a putty knife, and match the color of the frame. Once the compound is dry and you are able to paint the compound and the new pane to match the rest of the window.

To stop the crack from spreading, create a small arc using your utility knife, right beyond the area that is damaged. This will curve the crack to ensure it doesn't expand, allowing you to save your window's glass and avoid the expense of replacing it all.

Although you may be tempted to DIY your own repairs however, it can be very difficult without the proper tools. It's much safer and easier to contact a company that specialises in local double glazing repairs. This will help you save time and money, as well as make sure that your double-glazing is repaired to the highest quality.

Broken seals

A damaged seal can cause windows to lose their insulation properties, resulting in drafts and increased energy bills. It also allows moisture and humidity to seep into the windows, which can cause condensation and fogging. Foggy windows are a nuisance and will only get worse over time if you don't take action.

You can prevent the window seals from breaking by having your windows professionally installed and avoiding cleaning your windows with power. Even if your windows are in good condition, it's important to get the window seal replaced when you notice any signs of a break, such as condensation between the glass panes or a noticeable increase in your energy bill.

Window seals are made from flexible materials that may become damaged over time. This issue is more frequent in older windows, as well as those which have been exposed to sunlight. Window seals can be damaged due to issues with the installation, such as gaps and sloping frames.

While it is possible to repair a broken window seal at home but the process is a bit complicated and could cause damage to other components of the windows, for instance the argon gas that is inside the windows. It is recommended to contact an expert to look over your windows and repair any worn or damaged seals.

Once the window seal is replaced, your double glazing will function just as it should, securing your home from heat loss and cold air infiltration. This will save you money on cooling and heating while keeping your home warm.

In most cases, to repair a damaged seal on a window, it is necessary to remove the window from the sash. The old sealant should be removed. After the window has been cleaned and is now ready to be installed, it will be filled with argon and sealed again. While it is possible to do this yourself however, it is recommended to hire an expert glazier to make sure the work is done correctly and safely.

Broken door handles

The handle for your home's front door is a vital element of your security. It allows you to open the door, and also hooks into a latch that's fitted into a slot within the door frame to keep the door shut. If the handle of the door appears to be loose, it may cause problems opening the door. It may be a sign of issues with the locking mechanism too.

The good news is that fixing a loose door handle is fairly simple. In most cases, you'll need to tighten the screw that holds it in place. If the issue is more serious it may be necessary to replace the handle.

To begin, you'll need to wedge your door open with a door wedge or stop to ensure that it doesn't shut while you work on the knob or handle. This will keep it from causing damage to the paint and also let you access the entire handle or doorknob without having to worry about the latch being engaged.

Next, you'll want to take off the cover plate that sits on the door handle. It could appear to be a round or rectangular piece of plastic that's designed to conceal screws for a cleaner appearance. Some may have a tiny slot or detent that you could use a flathead screwdriver press down to let it go. Then, you'll have to take off the handle's base and expose the screws holding it in place.


The majority of the screws that secure your doorknob or door handle in place are hidden behind the cover plate. After you have removed it, you can see each one and tighten them if needed. Don't over-tighten the screws, since it could damage the knob or handle. When all screws are tight, you can put the base back on and place the handle or knob on top, aligning it with the screw holes (if there are visible holes) or the detent hole. Test the handle when you're done to verify that it works correctly.

Scratches and Chips

Sometimes, even the best-maintained double glazing can be damaged. Cracks chips, dents, and cracks could be caused by stray balls or a sudden wind gust. These can affect the performance of your doors and windows which then need to be replaced with new ones. It is essential to identify the signs of damage and contact your installer as soon as you can, ideally in writing. You can help by providing details about the issue, as well as photos in the event that they are relevant.

It is possible to fix chips or scratches without a lot of difficulty, based on their severity. If a scratch is deep enough to be felt with your finger it may be best to contact an expert glazier, since they will be able to utilize glass polish and some elbow grease to remove the scratch. They will also be able to provide some maintenance tips for your windows and doors, that will help you keep them in top condition.

Be on the lookout for signs that the gas cavity between your window panes is causing a leak. If you notice condensation developing between the panes, it could be that the gas inert has evaporated and warm air is finding its way into your home. It is important to contact your installer as soon as you observe this issue as it may be covered by your warranty.

If your double-glazed windows have a guarantee then you'll be able to get reimbursement for any repair costs. Alternatively, you should consider switching to a different company that you can count on to provide superior windows and top customer service. You can look up online reviews, check the BBB and request references from previous customers to ensure that you choose an installer with a solid reputation for professionalism and quality. In addition it is important to inquire about the accreditation of major manufacturers as well as Fenestration and Glazing Industry Alliance certification. This will enable you to avoid companies that aren't authorised to install your double glazing.

Edit Report
Pub: 10 Feb 2024 20:59 UTC
Views: 33