Wood Burning Stoves Near Me

Wood stoves can help you reduce your energy bills. They also support active woodland management that benefits wildlife.

If they are not properly installed and maintained, they can produce carbon monoxide which poses health hazards to the entire family. To avoid this, choose an appliance made of wood that is EPA certified and features the latest technology to ensure safe operation.

Catalytic Stoves

A catalytic stove is outfitted with a special honeycomb-like catalyst that converts the smoke from wood into carbon dioxide and water. This is a fantastic option for anyone looking to reduce the air pollution in their homes while saving money. They burn more hot and produce less creosote. They use less fuel. However, they can be more expensive to operate than non-catalytic models, and require regular maintenance of the combustion chamber.

Wood Stoves Certified by the EPA

The EPA requires that wood stoves are designed according to specific guidelines that limit their emissions. In accordance with these guidelines, a catalytic stove must not emit more than 7.5 grams per hour. This is compared to 4.1 g/hr for an uncatalytic electric stove fireplace. But, it's important to keep in mind that lower emissions ratings do not mean more efficient heating.

Sizing and Selection

It is essential that your wood stove is designed correctly for the home where it will be put in. The wrong sized stove won't perform as it should and may even overheat. A properly sized stove will increase the heat output while decreasing emissions. The brochure purchasing an EPA-certified wood Stove (PDF 530K) offers a straightforward method of sizing and choosing the best wood stove.

Non-Catalytic and Catalytic stoves

The first type of wood stove that was manufactured was the non-catalytic stove. These stoves are also known as traditional wood-burning stoves or open fire stoves. The primary benefit of a non-catalytic stove is that it doesn't require a secondary combustion to reduce emissions. Smoke is the primary source of energy wasted. The smoke from a non-catalytic wood stove contains creosote, a heavy substance which is a very toxic substance. The introduction of the catalytic wood stove reduced the risk of these issues. The catalytic wood stove uses catalysts to burn the gases in the smoke and eliminates the toxic creosote.

While the catalytic wood stove was created as a means to reduce toxic emissions but it isn't as effective as the secondary burn system that is found in the non-catalytic stove. The catalyst produces harmful fumes since it doesn't burn completely the small wood stove byproducts that result from burning. The honeycomb structure could be damaged over time. This can result in decreased performance and a need for replacement.

Keep the Combustion Chamber Clean

A catalytic combustor that is functioning properly will appear to be like a powdery gray. It should be free of soot, ash or any other material that can clog the catalytic surfaces, and reduce their surface area. The combustor shouldn't be exposed to flame impingement. This can result from a strong, fast draft that is pulling flames directly into the catalytic converter. This may also happen if the firebox door or ash pan's door is left open.

It is important to inspect the combustion chamber of the catalytic catalytic for physical damage or the need to replace. If the catalytic combustor has become damaged or requires to be replaced, it must be done as soon as is possible to ensure optimal performance.

Edit
Pub: 09 Dec 2023 14:34 UTC
Views: 113