How to Replace a UPVC Window Handle

Don't panic if your upvc handle is broken. Replacing a window handle made from upvc is a fairly simple job and can be accomplished in a matter of a few steps.

If you have a cranked or inline espagnolette type of window handle, all of them feature a square spindle that extends from the back plate and is inserted into the locking mechanism.

Determine the type and size of the lock and handle

Over time window handles and locks can be damaged or lose their functionality. The good news is that this can often be remedied without replacing the entire uPVC window unit. One of the first things you need to do is determine the type of lock and handle you have because this will help determine the replacement parts you'll need.

You can determine the type of handle by examining the base. A screw or pin will secure the handle to its base. If the screw is not present it could be an indication that the handle has split off from its base section. If the handle is split internally and doesn't hold onto the spindle anymore it could be a sign that the handle must be replaced.

There are a variety of different types of uPVC window handles The most well-known is the Espag handle. They are usually fixed with two bolts, and the spindle engages the locking mechanism within the window frame. These handles are typically used on tilt and turn uPVC windows.

Cockspur handles are a different kind of uPVC handle. Similar to the Espag handle, replace upvc window handle but they are a little further from the frame. These handles are typically used on older uPVC window frames.

Additionally, there are Venetian window handles that are similar to the Espag handle, but have flat bases that allow them to be positioned in a flush position with the frame. They are a great option for homeowners looking for a stylish, elegant handle that blends with their uPVC window frames. These handles are also available in a large selection of colors to fit any decor.

Measure the spindle

It is important to know how the handle is fixed before you purchase the replacement. This will tell you whether it's too tight or loose, and if it will fit inside the window frame. It is done by identifying what kind of handle you own and determining the spindle length. The spindle is a metal shaft that connects the handle to the lock in the window frame. The spindle comes in various sizes. The current industry standard is 8mm. Older handles might have a 9mm cross-section, so it's crucial to measure the old one to ensure you get the right size replacement.

There are many kinds of window handles. However, the most common are inline Espagnolette and cockspur handles. They operate an locking mechanism within the window using shootbolt rods that lock the window when it is closed. Depending on the type of handle they are held in place by screws or pins.

You can purchase Upvc handles replacement on the internet or at most DIY stores. They come in a range of finishes and are suitable for both new and replacement windows. For extra security they can be key-locking or a non-locking fire escape.

To take off the handle just open the window to the door and then remove all the screws holding it in place. Be careful not to cause damage to the screws and place them in a container for future use. After the screws have been removed, gently pull out the handle and measure from the base to the tip of the spindle. This will give you the necessary information to purchase the correct replacement. The spindle of the handle is the steel shaft that connects it to the gearbox for locking in the window frame.

Take off the handle from the old one.

Switching the handle of a uPVC window handle is a straightforward task and usually requires no more than five minutes if you have the right tools. The first step is to identify the type of lock and handle, which will help you identify the right replacement. After that, measuring the spindle will ensure that the new handle is a good for the job. The old handle needs to be removed and replaced with the new.

The majority of uPVC handles come with inline Espagnolette handles. These handles feature central spindles that slot into the locking mechanism on the window. They are typically simple to remove, but they may require force if they become stuck. There are typically two screws that keep the handle in place, which can be removed using the help of pliers or a screwdriver. There may be a need to remove pins, replace upvc window Handle based on the type of handle.

After removing the screws, you can remove the old handle. The top of the base plate will be visible once the handle is in an open position, revealing two screws that you can remove. If the sticker is still on, you will need to take it off.

Utilizing the screws from the handle, you are now able to screw the new handle into the appropriate position. Make sure the handle is in an open or unlocked position, and then align the screw holes with the holes on the window. Once you've done this, you can replace upvc window handle the screw caps and test the new handle to make sure that it works properly. It's simple to swap the uPVC, however you must make it right.

Replace the handle with a new one.

If you've been able to successfully remove the existing handle from the frame, it's time to put in the new handle. Begin by locating the screws and then removing them out using your screwdriver. Once the screw covers have been removed, store them in a secure location before moving on to the next step.

Then screw the spindle in by aligning it with the hole. The holes in the handle with those in the window frame. Use a screw of the same size as the previous one.

The uPVC Espag handle is fitted with a spindle of 7mm square which turns the lock mechanism that is mounted on the window. This style of handle is present in the majority of modern uPVC windows. uPVC Cockspur (also known by the name Cotswold) handles have an extended, curving nose that is secured to the frame's outer or cross member of the transom bar. They are usually found on older uPVC Windows.

It's important to lock and unlock the window numerous times after the handle has been installed. If everything goes to plan the new uPVC window handle should be properly attached and running smoothly. If not, the above steps will help you identify any issues and resolve it quickly. If you're struggling with your uPVC handle or have any other issues with your home improvement using glazed don't hesitate to call us at Bridgewater Glass for professional assistance. Our glaziers have been trained to repair or replace a variety of window frames and handles making us a good option for your double glazing replacement windows glazing requirements.

Test the new handle

Over time, the handles of uPVC can be damaged and worn out. They can become less secure and effective which is why it's crucial to replace them as soon as you can. This is also a great thing to do when upgrading your windows. Changing your handle and locking mechanism will ensure the integrity of your new windows.

When it is to uPVC window handles, there are a variety of different styles. Some are secured with pins or screws, whereas others have blades that slot into the lock mechanism. Each type has a distinct method of replacing it, and you'll need to know which one you have.

The most well-known kind of window handle is the espag. They're usually found on newer uPVC Windows. The spindle extends from the handle to the lock gearbox, and it activates the locking system when you open the window. They're also easy to remove, but you should be careful not to harm the mechanism or the handle when taking them off.

Cockspur handles are another option for uPVC window handles. They're fixed by a spur that hooks onto an elongated striker plate that is attached to the frame, and when you shut or tilt the window, it activates the locking mechanism. This type of handle is more difficult to repair than other types, but it's still an excellent choice for the majority of homes.

Venetian window handles are held by two bolts and have a low projection from the frame, in contrast to the Espag handle. These handles are ideal when you want to have a flush handle that blends in with uPVC window frames. These are perfect for residential and commercial properties.

Edit
Pub: 07 May 2024 17:21 UTC
Views: 37