So , You've Purchased Fiat 500 Replacement Key Cost ... Now What

Fiat 500 Replacement Key Fob

If your remote key fob has stopped functioning, it could be time to replace the battery. If you replace the battery, but it isn't working it could be the issue somewhere else.

At United Locksmith, we specialize in making new keys for classic cars. We have the tools as well as the parts needed for this service.

Dead Coin Battery

The most frequent reason why your Fiat 500 key fob will not unlock or lock the doors is a dead battery. The battery of the coin cell inside the key fob can be depleted quickly in the event that you don't use it often enough. If your remote began to show signs of weakening such as a loss in range or stopped working completely The battery is probably dead.

The battery in the key fob is held in place by steel clips that hold it in place. If G28 Car Keys aren't tight enough, they can cause problems with contact, which can prevent your remote from receiving power. Make use of a flathead screwdriver to open the retaining clips and then remove the old battery. Be sure to use an identical replacement battery kind of voltage, size, and specification as the original battery.

The exposure to water can cause the key fob to corrode or be damaged. Even a quick bath in soapy, warm water could cause damage to the chip. It's best to keep your key fob in a dry location.

Water Damage

If your key fob isn't functioning properly, it may be due to water damage. The rubber seals on key fobs prevent them from getting damaged by a light drizzle or splash of water. However, it's essential to keep the keys of your car away from the ocean, washing machine, and the pool.

The key fob is equipped with an electronic chip that sends an electronic message to the immobilizer system of your vehicle. The chip is what allows the 500 to lock and start. If it gets wet, however, it will no longer function.

You can clean the inside electronics of your keyfob using isopropyl alcohol, or an electronic cleaner to see whether they're still functioning. However, it is probably best to get a replacement from a dealership instead of trying to fix the key fob which was submerged in salt water.

A replacement fob can cost you some money however, it's cheaper than having to have your Fiat 500 towed to a dealership and repaired there! You can also do it yourself with the simplest of steps. Just make sure you have the right battery type before you attempt to open your key fob. This task is much simpler than it appears and you can find step-by-step directions online for nearly every key fob for cars.

Faulty Chip


The chip inside the key fob is in direct communication with the immobiliser in your car to ensure that your vehicle will start only when the right keys are in place. If the chip is damaged or damaged in any way your car will not start.

Damage to the water or a dead cell phone battery are among the most common reasons for an unreliable chip. It is best to delegate the work to a professional locksmith, who can repair the chip quickly and at an affordable cost.

If your key fob will not work after exposure to clean tap or rain water then remove the battery. Wipe down the electronic component with a towel. If the key fob isn't working, it is likely to be a damaged chip that will require replacement.

A few people will visit their dealer if they require an entirely new Fiat fob. But, this can be an expensive option. If you're looking for a low-cost solution to get your Fiat key fob repaired Look no further than United Locksmith. We have all the tools and knowledge required to fix your Fiat fob quickly and professionally. manner.

Faulty Receiver Module

Fiat key fobs transmit a signal to the vehicle, which will unlock and close doors (and start the car for vehicles with an automatic transmission) up to 50 feet. However there are several things that can cause the fob to cease functioning. This includes a dead battery water damage, worn-out buttons, a receiver issue, signal interference or malfunctioning chips.

If the fob was stored in a place that has suffered a severe trauma, such as being dropped on hard floors or getting washed in a washing machine or dishwasher, it might not be able to communicate with the car's Body Control Module (BCM). This is because the BCM is a secure system that can only accept a signal from a genuine original key and not another.

You'll have to replace the fob if this happens. A professional locksmith can handle the entire key replacement process including programming a new key for your 500. In fact, they could provide you with a clone key that functions like the original fob (and costs a fraction of the cost).

Edit
Pub: 25 Apr 2024 17:39 UTC
Views: 24