Don't Make This Mistake On Your How To Install Ghost Immobiliser

How to Install a Ghost Immobiliser

Ghost immobilisers protect your vehicle from key cloning and hacking. It prevents the engine from running until a PIN code has been entered. This can be as long as 20 characters.

It is undetectable by thieves, who are unlikely to think about this additional layer of security. Certain systems also come with an application that allows owners to disable the immobiliser if they forget their PIN, or to use the service/valet mode.

Connecting the vehicle's CAN Bus to the vehicle's

The Ghost 2 Immobiliser is a cutting-edge security system, can be integrated directly into the ECU of your vehicle. It offers a discrete protection against thieves. It is highly effective and user-friendly and can be a valuable addition to your vehicle's security arsenal. Like any anti-theft device, it's not foolproof and requires regular maintenance to function properly. Fortunately, this guide will help you get the most value from your Ghost 2 Immobiliser.

CAN (Controller Area Network) is a robust serial network that lets microcontrollers communicate with one another in short distances, without the need for a central control unit. It is designed to multiplex electrical wiring in vehicles to save on copper and has a number of advantages, including low costs and ease of use.

The CAN protocol is used in most modern cars to communicate with the engine management system, transmission controller, steering control module and air conditioning controls and many more. It also transmits sensor data like speed sensors and inputs to control the various functions of the car. The CAN bus can be used to monitor the health of these various components and could stop the vehicle from starting if it's in danger of failure.

Although the CAN bus can be utilized for a variety of reasons, it's essential to understand how it operates and how it's secured. It is possible to add additional features to vehicles using CAN bus, but it's crucial to safeguard it against hackers and other threats. The best way to accomplish this is to install firewalls and monitoring your CAN bus with software.

Ghost2' ghost 2 immobiliser review is hidden away in the wiring harness or dashboard, which eliminates the possibility of a burglar physically tampering with it. It's also impossible to reset the PIN code or emergency code without access to the vehicle.

You can turn on Transport Mode If you need to sell your car to valet parking, service or for any other reason. This feature disables the Ghost immobiliser's ignition and keyfob functions and will only come back on when the car reaches 31 mph for a period of 15 minutes.

How do you create a PIN code

The Ghost immobiliser is a robust security system that guards your vehicle from theft. The innovative technology uses the PIN to shut down the engine of your vehicle and prevent it from starting if you don't have the correct code or an authorized fob or mobile. The system's subtle design ensures the system is inconspicuous and offers unparalleled protection against theft. The system is TASSA-certified and could save you substantial amounts on your car insurance.

During the installation during installation, the Ghost system enters the learning mode to record the sequence of buttons that are pressed to create your unique pin code. Once the pin code has been created and the installer has completed its work, it will guide you through the process of activating the system. Once activated the Ghost system will disable the vehicle's start motor unless you enter a valid PIN or switch the vehicle to transport mode. This makes it extremely difficult for thieves or cloners to hack or duplicate the starter system of your vehicle.

It is simple to install it is easy to install a Ghost immobiliser, but you must follow the precise instructions in the user guide to ensure that it is operating properly. Basic hand tools can assist in making accurate connections, and a multimeter can aid in checking the electrical value. Insulation tape, heat shrink tubing and cable ties are a good option to shield exposed wiring. Check the system on a regularly basis to detect any issues that could be.

It is crucial to test the system one last time prior to turning on the ignition. The Ghost immobiliser will re-arm itself after 3 to 30 seconds, based on your vehicle's model. The system is also fitted with a Service/Valet Mode that allows you to temporarily disable the system to service or valet parking.

Ideally, the immobiliser should be hidden in a hidden location beneath the dashboard or steering wheel. It is recommended to use a small piece of paint or duct tape to mark the CAN H and L wires, so that you can easily locate them during testing. The CAN H and the L wires should be connected to an electrical source that can provide a constant 12V. It is crucial to verify the connections after testing as incorrect identification of these wires may cause the system malfunction.

The system must be activated

A ghost immobiliser blocks your vehicle from starting until you press a series of buttons inside the car, usually the steering wheel, door panel or central console. The sequence can be changed by the user at any time. Once activated, the system can't be removed. This makes it an ideal choice for anyone looking to protect their vehicle from theft.

The system is designed to be undetectable, which means it can't be detected by modern diagnostics or code-grabbing technologies. It also doesn't send out radio frequencies, which makes it even harder for thieves to detect the device.

If the device is discovered it will stop the engine from running. It will also sound an alarm to scare the burglar away. The device can be used to monitor the location of the vehicle and assist police locate it when it is stolen.

Contact Car Specalist Customs for a quote or to discuss your options in a Ghost immobiliser. We are fully trained to install a ghost immobiliser to your vehicle and will ensure it is hidden in a remote area. We can also provide additional security measures, such as an ignition lock for your wheel and a kill switch to help keep your car safe from thieves.

Disarming the system

It is important to know how to disable a Ghost immobiliser, if it's fitted to your car. It can be used in case you forget your keys or your car battery dies. The system has a unique PIN code that only you are aware of. It will not start the vehicle without this code. Pressing the combination buttons on the dashboard or steering wheel is the simplest way to enter your code. This is a much easier method than using the key fob, and also stops anyone from copying your remote.

Contrary to other aftermarket immobilisers which require cutting wires to install, Ghost2 is non-invasive and integrates with your vehicle's CAN bus network to operate. Its most prominent feature is that it bypasses the engine without affecting functions of the vehicle. This makes it very difficult for thieves to use signal boosts or duplicate keys to car keys. It doesn't emit radio frequencies, which means thieves cannot detect it.

The Ghost system also comes with a Transport Mode which allows you to temporarily disable the security system for situations such as transportation or servicing. This feature is great if you are lending your vehicle to someone else, without sharing your PIN number, or if your vehicle needs to be secured while you drive it. To activate Transport Mode simply press the service button 5 times within 2 seconds. The Ghost system will confirm activation with five indication signals.


Save the emergency code in your vehicle in a secure location. If you happen to discover yourself locked out of your vehicle, you'll be able to contact the technician or company who installed the system, and they'll provide you with the code. If you are unable to get in touch with them, you can call an authorized dealer. However, this might require verification procedures and you may be charged for additional fees.

Aside from the convenience of this system, you can also count on it to guard your car against theft and reduce insurance costs. Many insurance companies offer reduced monthly rates or even financial incentives for installing this anti-theft system.

Edit
Pub: 07 Dec 2024 16:25 UTC
Views: 25