Guide to Unlocking Unisoc powered Infinix devices Bootloader

Part 1: Preparation

  1. Install Drivers: Begin by installing the necessary drivers for your Unisoc powered Infinix device on your PC. You can download the Universal ADB Driver Setup from this link.
  2. Unpack Unlocking Archive: Download it from here and extract the archive. You can extract it anywhere convenient for you.
  3. Backup Data: Prioritize data security by creating backups of all essential data stored on your device.
  4. Activate Developer Mode:
    • Go to "Settings" on your device.
    • Tap on "About phone" and locate the "Build number."
    • Tap on "Build number" multiple times until you see a message confirming the activation of Developer Mode.
    • Navigate to "System > Developer options" and enable "OEM unlocking."

Part 2: Bootloader Unlock Procedure

  1. Connect Device: Connect your Unisoc powered Infinix device to your PC using a working USB cable. Do not connect the cable to the phone just yet.
  2. Shutdown Device: Completely power off your device.
  3. Run Unlock Script:
    • Run the "unlock_emmc.bat" script on your PC.
    • While holding down the volume down button on your device, connect it to the PC using the USB cable.
  4. Follow Command Line Prompts:
    • Pay attention to the command line prompts. If prompted to enter "yes," do so.
    • If instructed to press any button, follow the command accordingly.
    • Ignore prompts to enter "ctrl + C" and allow the unlocking process to complete uninterrupted.
  5. Completion and Recovery:
    • Once the unlocking process finishes, the command line will close automatically.
    • If the device becomes unresponsive, perform a hard reset by pressing the power and volume down buttons simultaneously.
    • Access recovery mode and perform a data wipe to ensure a clean start.
  6. Post-Unlock Status: After successful unlocking, a warning indicating the bootloader's unlock status may appear in the upper corner each time the device is started.
Edit

Pub: 30 Mar 2024 17:10 UTC

Edit: 30 Mar 2024 18:24 UTC

Views: 1009