A Brief History Of Peugeot Keys In 10 Milestones

Peugeot 208 Key Replacement

It is recommended to leave the replacement of Peugeot 208 keys to auto locksmiths with the required equipment and knowledge. They can create and program keys faster and less expensive than dealers.

A dead battery for your coin is the most likely cause when your key fob stops locking or unlocking the doors. But, there are other reasons why the key might be malfunctioning.


Dead Coin Battery

A dead battery in the coin compartment will hinder your Peugeot 208 from locking or unlocking, and won't start the engine. If this is the scenario, you'll need apply the backup starting technique that is detailed in your vehicle's owner manual.

Another reason why the 208 won't start is because the spark plugs are been worn down. Spark plugs are what ignite the fuel to start the engine. However they have a short life span. They'll eventually degrade if they're not used enough.

Fortunately, there's an easy solution to this issue. Examine the voltage of your battery with a multimeter. If it's lower than 11.5 Volts and you are not satisfied, then it is time to replace it. If the battery has corrosion it is crucial to clean its contacts. You can do this by lifting the rubber covers that protect the two terminals on the battery and using wire brushes to clean any corroded areas of the battery. Then, you must reconnect the positive pole cables to the negative.

Water Damage

If your 208 won't turn on and the battery is not empty, you must ensure whether the spark plugs are working. You may find that they are dirty and don't spark. This can be fixed by cleaning the spark plugs in a workshop.

Peugeot cars are equipped with a key with a transponder that is compatible with the immobiliser. This ensures that only the correct key is able to start the engine. If the chip inside the Peugeot key is damaged, then it won't transmit the proper signal to the vehicle.

This is a very common issue that can be caused by water damage. This is a typical issue in colder climates where the vehicle has been exposed to rain or snow. If this is the case, you should get in touch with a reputable locksmith who will have all the tools and equipment required to reprogram the new key. They also have the most up-to-date technology and the machinery needed to create the Peugeot 208 smart key. The process should take no more than 15 minutes.

Faulty battery contacts

Peugeot changed from the carbon-encased transponder chips to a brand new type of chip that uses electronic components that are placed on circuit boards. peugeot 106 key is great when it's brand new, but the circuit boards degrade over time and cease to function properly.

This could stop the immobiliser from triggering so that your vehicle won't be able to start. Contact an Peugeot specialist or a locksmith if this is the case.

Another issue that is common is when the battery in the key fob gets depleted, which causes the key blade to stop getting into the lock. A car locksmith will replace the battery, and cut a new blade for you. This is a quick solution.

Faulty Receiver Module

If your Peugeot key fob stopped working after dropping it on the floor, getting exposed to a sudden downpour or accidentally washing it the wrong way, it could be due to a malfunctioning receiver module. The receiver module is responsible for transmitting radio signals to the onboard computer that manages the central locking system of your Peugeot vehicle.

Rubber seals on the key fob keep water from getting to the electronic chip. However, prolonged exposure to water could cause damage to these seals and the chip. Submerging the key fob into sea water at the beach or throwing it into the pool can be especially damaging because of the high salt content.

The module will need to be replaced if your Peugeot spare key isn't working anymore. This can only be done by an expert auto locksmith or Peugeot specialist. Like other automobiles, Peugeot keys are protected by a unique immobilizer system that requires the correct code to begin the engine. It is for this reason that you should only trust a Peugeot locksmith to design and program an alternative.

Faulty on-Board computer

The computer on the board of your Peugeot is responsible for a variety of the systems inside your car, from power windows to the airbags. The on-board computer will show a code if something goes wrong. This code is stored inside the system and remains there until the issue is resolved. This can often mean that the on-board computers to be replaced.

The most typical reason for the warning light for the airbag to come on is corroded or loose connections within the sensor. This can be caused by wear and tear, aging, exposure to moisture and salt. This problem should be dealt with as soon as you can, because an airbag that is malfunctioning could be dangerous in case of an accident.

If your Peugeot is showing a card detected as not present error, then the battery in the key fob might be dead or weak. This will prevent the key fob from sending a signal that disables your vehicle's immobilizer. Try this by pressing the unlock button on the key fob and then trying to start your car. If this fails, then the key battery needs to be replaced.

Edit
Pub: 25 Apr 2024 04:48 UTC
Views: 9