12 Facts About Fiat 500 Replacement Key Fob That Will Make You Think Twice About The Cooler Water Cooler

Add a Sparkle to Your Fiat 500 Key Fob

These cute Silicone Covers will add a touch of fun to your Fiat 500 Key fob. The covers are easy to put on and place them over the black cover.

The silicone covers protect your keys from splashes and dust. They also make your key look much more fashionable. The signals sent by the remote control of your key are not affected and are perfectly compatible with the cover on.

Keep your keys safe from splashes, dust, and other contaminants

Add a little flair to your key by using this silicone cover. It is perfect for your key fob and does not move. It also shields your key from dust and splashes. The cover's silicone will not affect the signals that are sent by your key remote, which means you can use your key fob buttons like you normally do.

rekeying with these funky covers in Grey and Black. These covers are ideal for those who have their original cover appearing worn, scratched or dented. The covers are made of high-quality silicone and come with two key rings, which means you can swap them out when you are bored with only one colour.

These covers are designed to replace the stock black key cover that comes with your vehicle. You will need to remove the original key cover first before installing these covers.

Great look!

Fiat are a truly unique and recognizable Italian brand and their cars are a striking style that differentiates them from the rest. These stylish car key covers are an easy and enjoyable way to add some glamour to your keys, without becoming too overwhelming. They look amazing on your key fob and can be used to revive a worn-out one.

The covers are designed to replace the black cover and they snap in place easily. It is recommended to remove the old cover prior to installing the new.

The Fiat logo is available in both Grey and black. You can always change it in the future if you wish! They are also great gifts for Fiat 500 owners.

Easy to install

Fiat 500 key covers can be a great method to upgrade your keys. They come in a range of styles and colors so you can find the perfect style to match your personal style. The most attractive thing is that they're simple to put in, meaning you can install them in about ten minutes. You only need an screwdriver and some time. The first step is removing the cover that was originally installed. This has to be removed before the new cover can be fitted.

Once you have removed the old cover Once you have removed the old cover, use a flathead screwdriver to pry out the four major attachment clips on the passenger side of the fob assembly. These are marked in red on the image below. Pay attention to the yellow tabs, which must be deactivated.

After removing the battery, replace it with a brand new # CR2032 3 Volt coin cell battery. Make sure that the "+" positive side of the battery is pointing to the opening on the fob, and that the -" negative side is facing the rubber buttons.

Re-attach the passenger side mirror cover by aligning the tabs that locate it. After you've done this place the fob that's on the driver's side back into your vehicle and test it. Press the button on the front of the key. If everything is working as it should the parking lights will be lit and the doors will close.

Easy to remove

Fiat 500 Key Covers are a delightful way to refresh your key fob. They're easy to put on and have a distinctive appearance. They also protect your key fob from smudges and scratches. To install a new cover, you will first have to take off the old one from your vehicle.

You can accomplish this by pressing the "Fiat" red button on the front face of your key fob. By pressing the button you will release a lever which allows you to slide out the metal ignition switch (1). After removing the key, you will see an elongated silver switch with images of a locked and unlocked padlock on top of it. This is the key fob battery switch. It is easy to change the battery by turning the switch one quarter turn using an inexpensive screwdriver that is flat.

The key fob is equipped with a microchip in it that is used to communicate with the Body Control Module (BCM). When you insert the key into your Fiat key fob, it press an ignition switch, which is used as a "key-in-ignition" reminder. The BCM can detect the transponder in the key fob in order to confirm that it's a valid key.

You can also choose to add the twin pack of sport design for a unique, funky appearance to your key covers. These covers snap into place over the original cover and are available in Cream and Silver. The key cover is only functional if the original black cover is removed from your key fob.

Edit
Pub: 25 Apr 2024 19:40 UTC
Views: 17