The leading water bore stain cleaning solution. X-Fe is for use on non-porous surfaces like bathrooms, fibreglass, Colorbond, glass and other painted surfaces. X-Fe is a higher viscosity cleaner about the same consistency of paint which is designed to "cling" better to the area being cleaned and is therefore easy to use on vertical or sloping surfaces. Clean-up ceramic tiles, porcelain, toilets, showers, outdoor furniture and boats. Best of all, X-Fe is easy to use, has a pleasant aroma and is completely biodegradable. Coverage is 16-20 square metres per litre of product. Bore water and rusty metal leave unsightly stains that build up over time and become impossible to remove with normal cleansers or those other products that call themselves iron stain removers! Our X-Fe products will remove iron and rust stains quickly and easily without the hard scrubbing necessary with the others! They will also remove stains caused by gardening products containing iron. X-Fe products work by dissolving the iron precipitate that causes the stain, whether it’s from bore water, old metal, or a stain on the driveway from a leaking radiator.
X-Fe products are simple to apply. Paint or spray onto the surface, leave for a while and [Redirect Only] the stain will disappear. No need to scrub at all! As with all cleaning solution for stains products, a small area should be tested first to ascertain suitability of the product. No distributor? Buy direct. Wherever iron or rust stains occur X-Fe products will remove them. Best of all, our X-Fe products are easy to use. X-Fe has a pleasant aroma and both X-Fe and X-Fe Forte are completely biodegradable. "X-Fe takes away that horrible dirty, brown appearance that bore water stains leave and it is NuroClean all in one cleaner done within minutes of its application. X-Fe and X-Fe Forte are available in 1 litre and 5 litre containers. X-Fe Forte: depends on the porosity of the material. The time spent on trying to remove iron and rust stains is excessive - so much so that only half a job is done or no attempt is made at all! With the advent of X-Fe the removal of the stains need not be a special job. It can be incorporated into a regular cleaning programme. It is not necessary to use X-Fe every day, after the initial removal of the stain X-Fe needs only to be applied if the stain reappears. The benefits of using X-Fe are many - it is a user-friendly product with a pleasant aroma, no astringent fumes, completely biodegradable and very cost effective. X-Fe is well accepted by people who use it. They are amazed that X-Fe is so easy to use, no hard scrubbing is needed and it can be used on any surface. X-Fe and X-Fe Forte are manufactured in Australia by an Australian Company. Interested in stocking our incredible products? Contact us to organise a solution!
We independently evaluate all of our recommendations. If you click on links we provide, we may receive compensation. As someone who writes and tests laundry care products for a living, I know my way around the laundry detergent aisle. I've tried about every detergent type (liquid, powder, and pods), excluding laundry sheets.