15 Pinterest Boards That Are The Best Of All Time About Window Repair

Why Window Repair Is Necessary

A pebble thrown by the lawnmowers or a heavy drink set on your glass-topped coffee table are just one of the many things that can cause cracks to glass in windows. A broken window allows rain, wind insects, and other unwelcome elements to get into your home.

There are methods to repair a cracked glass and stop it from spreading.

Water Damage

If water is getting into your windows, a replacement is usually required. Moisture can cause rot in the wood of your window frame. It can also reduce the energy efficiency of your window. A reputable window company will replace your windows without destroying the integrity of your existing frames.

Wood rot can affect the exterior and interior of your windows. If your windows made of wood have rotting spots it is possible when the rot isn't advanced. If the rot has gotten to your mullions and muntins (the parts of the window frame that support your glass panes), you may need to replace the windows. This can cost more than a new set windows.

Another issue that is often required for replacement is a faulty seal between double-paned windows. This could be the result of condensation or debris between the two panes or it could be a sign that your window's insulation has failed. Fortunately, many modern windows have the insulation built into them. They won't be afflicted with the same problems as older windows with multiple panes.


Loose, cracked or rotting casings around your windows are unattractive and can lead to other issues. A damaged casing doesn't mean it's time to replace your windows, though. You may be able sand it and repaint it to enhance its appearance based on the condition of the wood surrounding it and its condition.

If the exterior casing isn't in great condition A new coat of weather-resistant exterior paint could be the best solution to keep moisture from damaging your window. Alternatively, you can install new exterior casings to offer an attractive and functional improvement to your home.

Paint chipped or peeling

Window sills and frames are usually close to the elements, and they are subject to a lot of wear and tear from rain and sunlight. Moisture is the main cause for peeling paint around windows, particularly when the wood is exposed. The water seeps into wood and when it evaporates, the pressure under the film of paint causes it to lose adhesion and peel. The moisture may be caused by condensation in the interior or from snow and rain outside. It's important to scrape and sand the surface immediately you notice the paint begin to chip. Some skilled painters add a water-resistant preservative or thinned boiled linseed oil to the wood before painting to prevent moisture penetration and help the new paint hold better.

When paint begins to crack, it's time to repair your window. Before you apply a new coat, place a drop cloth or tarp on the area you're working to catch any stray drops of paint. With a utility knife, carefully scrape away any paint. Be careful not to cut the wood below or cut through the underlying sheathing. Clean the area thoroughly and allow it to dry completely.

After the area is dry, sand the area again with a fine sanding pad. This will prepare the surface for primer and create a base that's ready to accept paint. If you're working with lead-based paint ensure you're using the appropriate safety equipment. Tape off any surfaces adjacent to the sanded area, such as baseboards. This will protect them from paint.

Then, prime and paint according to the instructions on the tin that you are using. Make sure to adhere to the curing and temperature guidelines for the paint, as these will vary depending on the type. Also, make window repairs near me to paint the exterior with an exterior-grade paint and the interior with an interior grade.

Repairing peeling or chipped painted frames is a cheaper alternative to replacing frames. If your window frames are unable to be repaired, it might be worth upgrading to more energy efficient windows.

Glass that has cracked

A broken window leaves your home vulnerable to wind and rain, as well as bugs. It's tempting to just replace the glass, but you can repair it yourself if there isn't too large a crack or break. It's best to address small cracks as soon as they happen, before they get worse due to time or temperature changes.

There are a myriad of methods that claim to make damaged glass invisible however, this is not a good order for a DIY project. A small crack can create a weak spot in the window, which can eventually lead to further breaks and a more expensive replacement. A great solution is to cover the crack with plastic. It covers it from the outside and prevents air or moisture from leaking through, which can damage the frame or seals around the windows.

Put on your safety glasses and gloves prior to removing the broken glass from the frame. Use a utility blade scraper, chisel, or scraper to remove the old glazing points that keep the glass in place. Utilize the knife to cut away any wood that is not used, then apply the linseed or a clear wood sealer.

The glass can be glued back into the position using epoxy. This option is the longest-running but it will give your glass a more robust appearance. If you're using epoxy, opt for the double-cylinder version that disperses the resin and hardener in equal proportion. This lets you precisely control how much epoxy is poured into the window, which helps ensure a good seal.

When resetting double- or triple pane windows, be sure that the gas fills are not damaged. These gases are important to insulate your home and ensuring that heat is kept in during winter and out in the summer. If you remove the window, the gases will escape and cause the glass to decrease its energy efficiency. Gas fills can be replaced by using the same procedure to repair cracks in other types of glass.

Edit
Pub: 04 Feb 2024 04:30 UTC
Views: 6