Reviving a worn-out aftermarket body kit requires careful planning, proper equipment, and systematic execution. Whether your body kit has suffered from minor scuffs, deep scratches, or cracks from a collision, the goal is to rebuild both its aesthetics and functional strength. Start by removing the damaged auto part dubai from the vehicle to work on it without interference from surrounding parts. Clean the surface with a solvent cleaner to break down oils and protective coatings, then sand the affected area with 800–1200 grit abrasive paper to ensure proper adhesion.
For superficial marks, you can use a touch up paint that matches your vehicle’s color. Apply it using a fine-tipped paint pen, letting sufficient time pass between layers. For significant fractures or missing sections, epoxy resin designed for automotive plastics is the optimal choice. Mix the resin following exact mixing ratios and apply it to the crack, smoothing it out with a plastic applicator. Allow it to harden completely prior to sanding.
Once the epoxy has fully cured, begin sanding again, starting with coarse grit and working your way to finer grits to create an invisible transition. Pay attention to complex shaping and aerodynamic lines to keep the aerodynamic profile intact. After sanding, wipe the area clean with a tack cloth to remove any dust.
Next, apply a flexible primer formulated for ABS and PP which improves longevity and reduces delamination. Allow the primer to set for 30–60 minutes, then polish with fine sanding sponge. Now you’re ready to paint. Use a engineered plastic-specific automotive coating. Spray in multiple light passes, keeping the can at a uniform 6–8 inch gap to ensure flawless application.
After the paint has dried, apply a high-gloss urethane clear for UV resistance. Multiple thin layers are better than one thick one. Let the clear coat set undisturbed for 24+ hours away from debris. Finally, polish the repaired area with a ultra-fine polishing paste and soft cotton pad to blend it with the rest of the body kit.
Post-repair upkeep with regular detailing will help maintain the restored look. Keep in mind that while DIY repairs can be effective, major fractures or fit issues demand expert intervention to ensure safety and proper fit. With meticulous technique and patience, you can make it indistinguishable from factory condition.