steel tube frame connectors

Bringing ground anchors for sheds or more pieces of steel tubing together often requires the use of a steel tube frame connector. These sturdy fasteners come in a number of designs, each boasting its own benefits and drawbacks. For example, the butt joint is the most widely used option, connecting the pieces end-to-end with remarkable ease. However, its limited movement means these connectors may not be suitable for applications needing flexibility.

Two steel tube frames can be connected by overlapping them and then welding them in place. This type of joint is stronger than a butt joint, making it suitable for applications that require increased flexibility. Despite this, lap joints are more complicated to weld together and consequently they are not used as often as butt joints.

Shaped in an iconic “T”, T-joints are structural connectors crafted from steel tubes which are fused together at 90 degrees. While they boast greater strength and suppleness than lap joints, these tube frame connectors can prove tricky to weld and are not as ubiquitous as other components.

Connectors in the shape of a cross, with four pieces of tubing connected at perpendicular angles - cross joints - are the strongest of all steel tube frame connectors, but this strength comes at a cost. Unlike more accessible types of steel tube frame connectors, cross joints do not come easily when it comes to welding, making them less popular in the marketplace.

An array of alternative metal tubing assemblies exist, with sleeve, bead, and pin being some of the less popular methods. With a sleeve connection, one tube is simply pressed within the other and primarily utilized when not needing much variance. The bead joint uses welding to fasten a protrusion onto the frame before inserting into the other section. Lastly, the pin joint entails welding a pin onto one pipe before embedding into its fellow piece.

yuantai tube specification and stability of any selected steel tube frame connector relies heavily on a well-executed welding process, so take care to ensure a secure fitment.

Edit

Pub: 21 Aug 2023 11:33 UTC

Views: 21