20 Things You Need To Know About Fiat 500 Replacement Key Cost

Fiat 500 Replacement Key Fob

It might be time to replace the battery if the 500 remote key fob is not working. If you do replace the battery and it does not work, then the problem is likely to be elsewhere.

United Locksmith specializes in the production of new keys for classic automobiles. We have all the necessary tools and parts for this service.

Dead Coin Battery

A dead battery is the most frequent cause of your Fiat 500 keyfob not locking or unlocking the doors. The key fob contains the battery of a coin-cell that will drain quickly when it isn't used often enough. If your remote is beginning to show signs like a loss in range or stopped working, then the battery may be dead.

The battery inside the key fob is held in place by steel retaining clips. If the clips aren't tight enough, they could cause contact issues that will stop your remote from receiving power. By using a small flathead screwdriver, pull the clip that holds the retaining pin open to remove the current battery and insert a new one. Be sure to use an alternative battery that has the same kind of voltage, size and specifications as the original battery.

The key fob may also become corroded or damaged by water exposure. Even a brief bath in soapy water can cause damage to the electronic chip inside. It is recommended to keep your key fob in a dry area.

Water Damage

Damage to your water supply could be the cause of your key fob not working properly. Key fobs are fitted with rubber seals that prevent them from being damaged by light rain or a splash of water, but it is crucial to keep your car keys safe from the ocean, pool, and the washing machine!

The key fob contains an electronic chip inside that transmits a signal to your car's immobilizer system. The chip allows the 500 to be locked and started. If it gets wet it won't function.

If you're trying to determine if your key fob is still functioning, you can clean the internal electronics with isopropyl or electronic cleaner. However, it is probably better to purchase a new one from a dealer instead of trying to repair the key fob which has been submerged in salt water.

While a replacement fob might cost you a little bit of money, it is much less expensive than having to pay for your Fiat 500 to be towed to a dealership and fixed! You can also fix it yourself with only a few steps. Be sure to use the correct battery type before you attempt to open your key fob. You can find step-bystep directions for every car keyfob online.

Faulty Chip

The chip inside the key fob communicates with the car's immobiliser unit to make sure the vehicle is only capable of starting when the correct key is used. If the chip is damaged or corrupted in any way the car won't start.

Water damage or a dead battery are the most common reasons for a faulty chip. Regardless of the reason, it's a good idea to leave the job to a locksmith, as they will be able to repair the chip quickly and at a low cost.

If your key fob stops functioning after exposure to clean water from the tap or rain, remove the battery and wipe down the electronic component with a towel to ensure it is fully dry before putting it back into. If please click the following web site does not function, there's the possibility that it's damaged components and requires to be replaced.

Some people go to their dealer if they need an entirely new Fiat fob. But, this can be an expensive option. If you are seeking a cost-effective method to have your Fiat key fob fixed then look no further than United Locksmith. We have the tools and knowledge required to repair your Fiat key fob in a timely and professional way.

Faulty Receiver Module

Fiat key fobs send an alert up 50 feet away to the vehicle, which will unlock and close the doors (and start the vehicle for vehicles with automatic transmissions). However, there are a few factors that could cause the fob to stop working. This includes a dead coin battery water damage buttons, worn out buttons as well as a receiver module problem, and signal interference or a malfunctioning electronic chip.

If the fob has been in a pocket which has suffered a severe trauma, like falling on hard floor or being washed in a washer the fob may not be able to communicate with the car's Body Control Module (BCM). The BCM is a security system that can only accept signals from genuine original keys.


You'll have to replace the fob if this happens. A professional locksmith can handle the entire process of replacing keys including programming a new key for your 500. In fact, they'll provide you with a replica key that works just the same as the original fob (and costs a fraction of the price).

Edit
Pub: 26 Mar 2024 23:16 UTC
Views: 140