10 Wrong Answers To Common Repairs To Upvc Windows Questions Do You Know The Right Answers
Repairs to uPVC Windows
uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't corrosion or rot.
It is important to clean and oil UPVC windows and doors regularly. This will reduce unnecessary repair costs and also improve the efficiency of energy.
1. Broken Glass
If the glass in your window is damaged, it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good shape.
For single pane windows, it is fairly easy to replace windows, and the new one will generally fit within the old frame very easily. However If you have double pane windows that are secured by internal beading, it will be more difficult to remove the existing panes and install new ones. In this case it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.
Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor and could be trampled under.
Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop drafts and water from entering the property until a professional is able to come out and fix the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the distance between the door and the window is substantial, you may prefer security screens that includes an opening. This will give you the best of both.
2. Sagging
uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time they may be afflicted by a variety of issues like sliding. A sagging uPVC windows can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from becoming worse.
Repositioning the hinges could aid in fixing a window which is sagging. You'll first need to open the windows to reach the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you are happy with the size of the window, you can tighten screws to hold them in place.
If you can't reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and draught-proof.
uPVC handles could also become loose. This is typically caused by screws that have become undone over time, but it can also be due to the handle mechanism wears out. It's relatively simple to fix a loose uPVC hand. First, you'll need close your window and do a test fit. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and then return the mechanism to its original its original position.
3. Water Leaks
If you're waking up to wet floors and mouldy walls every time it rains it's important to take action. Water leaks from windows are not just a cause for degradation of your home's structure but also undermine your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.
This is a simple fix that can be accomplished by any DIYer who is competent. Depending on the severity of the problem the old caulking may need to be removed before a new layer can be put on. When it is time to uPVC repair, it is important to avoid 'over-caulking'. This can make your window more difficult to clean and reduce its energy efficiency.
It is essential to ensure that any drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.
Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.
It is also important to keep in mind that if the leakage originates from the glass of your double-glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or loose and open with ease, it may be the hinges that are at the fault. These are easily repaired by any skilled DIYer and can usually be done within a few minutes.
Like all mechanical parts hinges will wear out over time. window repairs near me 's very simple to replace a hinge on a window but it's much easier if someone else helps you hold the frame.
It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.
The issue can be caused either due to opening the window in the wrong way or a faulty installation at the factory. Sending us photos via our website will often solve the issue. We are happy to give suggestions.
It is also important to lubricate the hinges regularly. Applying an engineering lubricant that is light to the hinges is a great way to do this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the chance of windows sticking and help prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.
5. Draughts
Draughts can be caused by several different things. The hinges may also become unbalanced due to wear, creating a gap where the sash meets frame. If they're beyond repair, it may be required to realign them. In addition, the interlock could also become disaligned. This is located on the hinge side and may need to be cleaned. In some instances it might be necessary to replace the hinges.
The next most common reason for draughts is window seals. These are susceptible to being worn out or damaged over time and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures, and reduce the possibility of draughts.
Lastly, one of the most effective methods to reduce drafts is to use a draught excluder, these are usually fabric tubes that are filled with some sort of filler and can be put on top of your windowsill. They can help block out cold air and keep your home warm and cosy!
With a little maintenance and repairs your windows made of upvc will provide a great level of insulation and security for your home. It is important to remember that all windows eventually wear out and it may be cheaper to replace them than to repair them. If you have any problems with your Upvc window you should consult a professional as soon as possible.