Its History Of Car Key Cover Fiat 500

G28 Car Keys

If your 500 keyfob ceases functioning, try another to see if it can be recognized by the car. If it does, the issue is likely to be related to the original fob's battery, or water damage.

First, replace the battery. Make sure the new # CR2032 coin battery is properly inserted with the "+" side facing downwards in the fob.

Dead Battery

The majority of the time, when a fob's not working, it's just because the battery is dying. It's easy to fix and the majority of fobs will notify you that the battery is getting depleted. You can find the instructions on YouTube for nearly any key fob for your car, or in the owner's manual. You can also replace it by taking it to the locksmith or dealer who has sold it to you.

Sometimes, a fob may cease to function, and it could be an issue with the internal circuit board. This is a bit rare but it could happen. If you dropped the fob on a hard object, it can damage the internal chip. This can also happen when you use an aftermarket key and the fob does not work. In this case you'll have to visit a dealer or a locksmith and have it reprogrammed to work with your 500.

One 2012 FIAT FIAT 500 flip key remote - Looks-alike Ilco with locks, unlocks, and trunk buttons – new keyless entry replacement (will require cutting and program by a locksmith).

Damaged Chip

A key fob from Fiat 500 is an electronic device that transmits the signal for the car to start when you press the button. It is equipped with a microchip that contains information about the code needed to connect with your car. If the chip is damaged, it won't transmit the correct code and the car won't start. It is possible to repair this type of damage and a locksmith can help. United Locksmith is capable of providing this service for old models as well, as for newer ones, so don't feel in a rush to call them.

You can buy a new fob and have it programmed professionally by locksmiths. It's cheaper to do this than go to the dealer and works just as well. A locksmith will require specific information from you, including the year your car was manufactured and the name of its model.

If you're not sure how to fix this issue you can try rubbing the chip with an US dollar bill. The copper in the bill is abrasive enough to remove oxidation and dirt, however, it won't cause harm to the microchip. If the chip is physically damaged however, it may not be in a position to be repaired. This could happen if you drop it, knock it over by accident with your vehicle or any other type of physical trauma.

Water Damage

Whether you accidentally dropped your keys in the pool, left them in your pocket while swimming at the beach, or splashed them with water on a rainy day, it's likely that your key fob is likely to suffer water damage. Even if it's just a little water on the key, this can cause serious problems to its electronics and prevent it from working efficiently.

The good news is that it is possible to solve this issue by taking off the fob's key and using a paper towels to rid it of any remaining dirt or water. When the fob is dry you can then replace its battery and it should begin working again.

You can also take it to an auto repair shop or locksmith to get it professionally programmed and cleaned. These experts will be able to use special equipment to make sure that the key fob is compatible with the computer system in your car.


If your Fiat 500's main fob fails to function, it can be a stressful and frustrating. It can be costly and cumbersome to take your key fob to the dealer. A locksmith can replace your key fob, without having to visit the dealership. Because of this, they are a superior choice than the dealership.

Pairing Issues

When you drop your key fob, or it ceases to function and nothing else seems to be going on this could be because of the chip that has gone awry. This could be due to water damage or a dead battery, or it may just need reprogramming.

Often, this can be done by following the instructions in your owner's guide. If you're having difficulty or your manual isn't working then you should hire an automotive locksmith complete this task. This will ensure that the chip is not damaged, and is the most economical alternative.

Another problem with some 500 owners is that the key fob won't lock the car. This can be a problem if you need to refill at a gas station. Some owners have reported the locking mechanism on their 500's failing and requiring replacement of the entire intermediate shaft for steering. This problem has actually been mentioned in a technical service bulletin (TSB) by Fiat.

A reputable locksmith can assist you when your Fiat is experiencing problems. They can duplicate the key you have or create a brand new one that is able to lock and start the car. They can do this without seeing your previous key and are usually more affordable than purchasing it from a dealership.

Edit
Pub: 25 Apr 2024 05:09 UTC
Views: 19