Calculating Board Feet in a Log
To estimate the board feet in a log, you can use one of several standard formulas. The most common method is the Scribner Log Rule, but the Doyle Log Rule and International 1/4-Inch Rule are also widely used. Below, I'll explain the Doyle Log Rule, as it's simple and commonly applied.
Doyle Log Rule Formula
The Doyle Log Rule estimates the <a href="https://boardfootcalculator.pro/log-board-foot-calculator/">board feet in a log</a> based on its diameter and length. The formula is:
Board Feet
(
Diameter (in)
−
4
4
)
2
×
Length (ft)
Board Feet=(
4
Diameter (in)−4
)
2
×Length (ft)
Steps:
Measure the diameter of the log:
Use the small-end diameter (inside the bark) in inches.
If the log is not perfectly round, average the measurements.
Measure the length of the log in feet.
Plug the values into the formula and calculate.
Example:
You have a log with:
Small-end diameter = 16 inches
Length = 12 feet
Board Feet
(
16
−
4
4
)
2
×
12
Board Feet=(
4
16−4
)
2
×12
Board Feet
=
(
12
4
)
2
×
12
Board Feet=(
4
12
)
2
×12
Board Feet
=
(
3
)
2
×
12
Board Feet=(3)
2
×12
Board Feet
=
9
×
12
=
108
board feet
Board Feet=9×12=108board feet
Key Notes:
The Doyle Log Rule tends to underestimate board feet for smaller logs (less than 28 inches in diameter) and overestimate for larger logs.
For more accurate results, use the Scribner Log Rule or International 1/4-Inch Rule, which require log scale tables or specialized tools.
Always measure the small-end diameter and ensure the log is measured inside the bark.