5 Laws To Help The Ghost Ii Immobiliser Industry
Ghost II Immobiliser
Protect your vehicle against hacking, key-cloning and car theft. It is completely silent and unnoticeable by a would-be car thief since it does not use LED indicators or key-fobs to alert thieves to its presence.
Transport Mode can be temporarily disabled for situations such as vehicle transport or when your vehicle is being repaired.
Simple Change of PIN Code
Ghost is a groundbreaking next-generation security device that is able to secure your vehicle without cutting wires or adding aftermarket alarm or immobiliser key fobs. It is directly connected to the vehicle's CAN Data Network and a personalized PIN Code can be programmed in it using the buttons that are factory-installed on the dash and steering wheel. This code will stop the engine from starting, and is not detected by any RF scanning technologies or code-grabbing technologies used today.
The system is equipped with an emergency pin code bypass, in case the user forgets his/her code or a key to program ceases to function. It also has a Service/Valet Mode which allows the vehicle to be started temporarily and driven without needing a valid code, making it ideal for transport or for servicing.
While the UK automotive aftermarket is thriving but it's not completely safe from theft. The OBD port in your vehicle could be hacked by thieves to get around the traditional security measures like locking your steering wheel and wheels. This can be done using a laptop, a USB cable and a cheap OBD scanner available on the internet for less than PS50.
To prevent theft, it's essential to secure your vehicle from theft by using an immobiliser for ghost ii. Ghost 2 immobiliser 's a small device that can help prevent vehicle theft. Once you know your PIN code it's simple to use. The device is enclosed inside of a tiny box and can be installed in the wiring harness of your vehicle. It can be installed anywhere on your vehicle and is weatherproof. This makes it hard for thieves to locate. The device is also easy to install and comes with a money-back guarantee.
Weatherproof tiny device
The device is connected to the CAN data network of your vehicle without cutting wires and is completely silent. It can be programmed using a a unique PIN code using the buttons on the steering wheel as well as the dashboard to prevent theft. The device comes with an GPS tracker built in. It can be activated through an app that you can download on your phone and is recommended by several car insurance companies. It is weatherproof and can be hidden in the car, making it nearly impossible for thieves to find.
In contrast to traditional systems that can be detected by criminals, the ghost II operates in a quiet manner and requires between 4 and 21 presses on the vehicle's buttons. This can be determined by the owner of the vehicle to their preference and the sequence is unable to be broken. There is a mobile phone app that can be used to turn off the system. If you are selling your vehicle, there is also an master reset code that can reset the immobiliser CAN bus.
Modern thieves are able to utilize diagnostics to spot circuit breaks on modern cars. The Ghost, however, doesn't have any. Our CANbus fitters can install this system in a vehicle with confidence.
Unlike other CANbus immobilisers that require key fobs for installation, the Ghost is compatible with all types of vehicles. The technology behind it is so advanced that it is able to protect against a variety of security threats, such as signal relay attacks and ECU swapping. It is compatible with many smartphones and will send notifications to owners when their vehicle is driven unauthorisedly.
Each vehicle is tested
Ghost is an innovative immobiliser system that protects your vehicle from key cloning, hacking and even key theft, unlike anything else on the market today. To steal a Ghost-protected car the thief must physically remove the device and take it to an unattended trailer. It also protects against the use of jumper cables, wheel locks, cables, and universal keys.
This extremely simple to install device operates completely in a quiet manner and connects to the vehicle's CAN data circuit, enabling it to communicate directly with the ECU (Engine Control Unit). It is so small and sealed that it can be placed anywhere within your vehicle.
Once installed, it blocks the vehicle from starting unless the unique disarm sequence is entered by pressing the buttons on your vehicle's steering wheel, door panels or center console. It can be set up to 20 numbers long and allows you to choose how secure you want to be. It is also possible to activate a Service/Valet mode that allows you to temporarily start and drive your car without needing to enter your PIN.
It is an CAN data circuit, which means that there aren't radio frequencies like an immobiliser that is traditional. This means that a burglar can't listen to the relay and attempt to determine the PIN code being entered. It also doesn't have any circuit cuts and isn't identified using diagnostic tools or by code-grabbing technology or RF scanning.
Boundary Car Care is proud to be an approved installer of this wonderful product. We are very impressed by its performance and the peace of mind it provides our customers. It is a great way to protect your pride and happiness in these challenging times.
Emergency Pin Code override
The Ghost immobiliser blocks your vehicle from starting without the correct PIN code. It is weatherproof and tamper proof. It's discreetly hidden within the wiring harness of your vehicle. It utilizes the buttons on your steering wheel or dashboard to create an unique code sequence that must be entered to begin the operation of your vehicle. Unlike Thatcham devices, it doesn't have LED indicators and is linked to your vehicle using the CAN system. This makes it unnoticeable by professional thieves who use the readily available diagnostic tools that are able to detect alarm/immobiliser circuits on modern vehicles.
If you'd like to temporarily disable your Ghost immobiliser, it can be activated by entering an emergency code to override the app on your smartphone. This lets you loan your car to family members, friends or valet, without sharing your pin. It's ideal for situations like servicing or when you need to leave your car at a valet or garage.
Ghost can be used in conjunction with the driver fob. This gives you the option to start your car using your key or via the app. This is ideal for those with an infant who would like to drive the car or you are unable to enter your pin code quickly or if you want to use the vehicle in an emergency such as an accident.
It's no surprise that the Ghost immobiliser is a simple PIN-change procedure, user-friendly interface, and numerous safety features, is recommended by many insurance companies. It is also covered by a security guarantee. Its sleek compact design, sleek appearance and seamless integration with your vehicle's existing systems make it an essential addition to any high-performance or classic vehicle.
Service/Valet mode
The Ghost immobiliser can stop vehicle thefts by blocking communication between the key and the ECU. This means the engine cannot be started without a unique PIN. It's also hidden inside the wiring, allowing it to be hidden from view and does not use LED indicators that could indicate its presence. This is ideal when you need to hand over your vehicle to valet parking or mechanic. Enter the code provided by your engineer after completion of installation to enable valet mode. This will allow the vehicle to start without having to enter the disarm sequence. To exit valet, simply return your vehicle to normal operation. The code will be changed automatically to the pin you normally use.
Ghost is designed to work with your car's CAN bus system, unlike other aftermarket security products that rely on buttons or key-fobs. This gives it unmatched protection against the latest theft methods like key cloning and hacking.
Once installed your engineer will show you how to arm or disarm your vehicle. All of this can be accomplished using your smartphone app. Your engineer will create a unique pin that is easy to remember, but mathematically unattainable for thieves. If you forget it do not worry, as every installation comes with an Emergency PIN Code Override to restore your vehicle to working order.
Our installers are fully qualified and have been trained to ensure that your Ghost is installed correctly. All installations are done on the premises of the customer. We also offer an explanation of how to use the device as well as a mobile application. Once your Ghost has been installed, we ensure its functionality for life.