The People Closest To Ghost Immobiliser Install Share Some Big Secrets

Autowatch Ghost Immobiliser Installation

The Ghost is the UK’s most advanced aftermarket immobiliser that works with CAN buses. It's discreet and does not have LED indicators or key fobs and is hidden within the wiring of the vehicle.

The user can also disable the system temporarily using Transport Mode when renting their car. This guide will walk you through the process of installing a Ghost immobiliser.

Professional Installation

The Autowatch Ghost immobiliser protects your car against key hacking attacks, cloning attacks and relay attacks. The system connects directly to your car's ECU and is protected by a unique PIN code that you choose. It is inaccessible to thieves using diagnostic scanners or other advanced methods, and it is unable to be disabled by circuit cuts.

The system is easy to use, but professional installation is recommended to ensure a smooth connection with the ECU of your vehicle. A certified installer from Thatcham can assist in the installation and programming of your Ghost system. They can also recommend a tracking or alarm system to complete the security package for your vehicle.

First, the installer needs to disconnect your battery to prevent the possibility of airbag deployment and short circuits. Once this is done the installer is able to safely begin work. Hand tools are essential for securing connections with precision and a multimeter can be used to check electrical values and safety. Cable ties and insulation tape are also necessary for securing connections and keeping wiring tidy. The Ghost Immobiliser user's manual will provide specific instructions specifically tailored to your specific model.

It is essential to choose the right grounding spot that is free of paint or debris during installation. The installer must be sure that the immobiliser's CAN H and CAN L wires are connected to the correct ports on the vehicle's ECU. The wires can be connected or soldered, depending on the model. A high-quality connector is recommended to ensure a long-lasting and secure connection.


Once the install is complete, the customer can activate Transport Mode. This allows the vehicle to be used by valet parking attendants or mechanics without needing to know the pin code. The customer has to press the icon for service on the dashboard five times over two seconds. The system will confirm this by showing 5 indicators.

The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's a great choice for those who rent their vehicles frequently on platforms such as Turo. An immobiliser can reduce insurance costs, since it lowers the chance of theft.

Getting Started

If you're looking for a solution to safeguard your vehicle from theft it is best to go with an autowatch ghost immobiliser. It prevents your car from starting even when someone copies or steals your key. This is due to its advanced technology, which is designed to stop the engine from running until the correct PIN code is entered.

The device works by connecting to the CAN bus network in your vehicle which allows it to communicate with the ECU directly. It uses buttons that are already present on the dashboard and wheel to create a unique sequence that only you know which makes it impossible for others to start your car. This is the best security system that will safeguard your car's pride and joy and preserve its value in the event that you decide to sell it in the future.

Installing an immobiliser from Ghost is simple however, you must follow the directions to avoid electrical problems and system malfunctions. You must first locate a 12V power supply and a solid grounding on the car's chassis. After that, you can begin connecting the wires for the immobiliser. Make use of high-quality connectors and soldering methods to create a solid connection. Make sure to shield the connections with heat shrink tubing or insulation tape, or other materials to prevent electrical short circuits.

After the wires have been connected, you can reconnect the battery and then turn on the engine to test the immobiliser's function. After you've confirmed that everything is working correctly, you can install the immobiliser in a secure position inside the vehicle. Be sure to cover it properly to stop any thief from taking advantage of it.

The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified, which means that it meets the highest standards of security and is a fantastic protection against car thieves. It provides superior protection against key cloning, hacking, and relay attacks, and it can't be disabled without knowing the code. The device is also easy to use and is able to be put into a service valet mode so that your vehicle is not activated when you take it in for maintenance or an MOT.

Wiring

The Ghost Immobiliser is a cutting-edge security system specifically designed to deter theft of vehicles. It communicates with your vehicle's ECU and directly connects to the CAN bus. The Ghost Immobiliser will not interfere with the factory settings of your vehicle unlike other aftermarket systems which require the removal of circuit elements.

It's also totally undetectable by thieves using diagnostic scanning devices. This is because the system doesn't send and receive radio frequency signals, and it relies on the CAN data to communicate with your ECU. It also doesn't require modifications to your current key fobs.

To utilize the Ghost Immobiliser, simply turn on your car's ignition and enter your disarm sequence (either one or two buttons). The indicator will flash twice to confirm that you've entered the correct code. You can now start your vehicle and drive safely.

Once installed, the Ghost Immobiliser will protect your car from hacking and key cloning while preserving the value of your most prized possession. In Transport Mode, you can temporarily disable the Ghost Immobiliser if you need to hand your car over for service or valet parking.

You'll need a constant power source (12V) as well as a grounding point to complete the installation of the Ghost immobiliser. Ensure that these are both well-insulated and safe to touch. It is also recommended to use cable ties to tie and secure the wires, since this reduces the risk of being tampered with by thieves. To avoid making The Keylab , double-check these points and mark them with the use of tape or labels. It's also a good idea to inspect all connections for signs wear and tear. Be sure to ensure that all connections are firmly in place, and are properly protected. Make sure to test your Ghost Immobiliser after installation has been completed. This will ensure that the unit functions properly and that all connections and insulation are safe. If there are any issues, make certain to fix them immediately.

Testing

The Autowatch Ghost immobiliser is an innovative vehicle security system that works seamlessly with your car's ECU to stop the motor from starting without authorization. Its cutting-edge technology safeguards your car against key cloning and hacking and other methods that thieves employ to steal cars. The Ghost works in conjunction with existing tracking and alarm systems to provide the most effective protection for your vehicle. The Ghost's unique features and discreet design make it a preferred option for car enthusiasts and security-conscious motorists alike.

To ensure proper integration of the Ghost Immobiliser, it's important to follow all steps of the installation process. Check the wiring diagram of the vehicle to aid you in locating and connecting the wires. The next step is to determine the grounding and power sources. Once these are found, you'll have to mark them in a way that they are easy to locate when installing. It is essential to use top-quality materials and tools. Basic hand tools can aid in making precise connections. A multimeter can verify electrical values, and also ensure security. Cable tie and insulation tape will ensure that all connections are tidy. Additionally, a user's manual will provide specific instructions tailored to your Ghost model.

Before proceeding with the installation, it's important to test the system by entering the PIN code and starting the vehicle. This test will verify that the immobiliser is working as it should and prevent unauthorised vehicle starts. It's recommended to perform this routinely as part of your routine inspections of the vehicle to ensure the system is always functioning correctly.

Once the installation is complete Once the installation is complete, you can drive your vehicle with confidence. The Ghost will help keep your car and its contents secure from thieves who might steal it and ensure that no one can escape with your car without the proper PIN code. The Ghost can be paired with an approved Thatcham tracker, which detects attempts to steal or tamper with. This allows you to track your vehicle if it is stolen.

The Ghost is compatible with a range of vehicles, including those from most major manufacturers. Monty's Locksmith can help you secure your vehicle with this innovative device. Contact us today to learn more about our services and installation options. We are a TASSA registered installer, a certificate that ensures that we adhere to strict standards in the installation of our products. This assures insurance companies, customers, and law enforcement that all installations are completed safely and in a correct manner.

Edit Report
Pub: 30 Nov 2024 22:00 UTC
Views: 24