How to dump your firmware
Please note that Hekate is needed for this guide.
Pick the guide that corresponds to your device model:
Erista
What you'll need:
Steps:
- Place TegraExplorer.binandLockpick_RCM.binin/bootloader/payloads/on your SD card.
- Launch into Hekate, select Payloads and finally select the Lockpick_RCM.bin payload.
- Once in Lockpick, select Dump from SysNAND.- You may use the (VOL +) and (VOL -) buttons to scroll up and down and
 use the button to confirm your desired selection. button to confirm your desired selection.
 
- You may use the (VOL +) and (VOL -) buttons to scroll up and down and
- Once the dumping process is done, return to the main menu and select Reboot to hekate.
- Once in Hekate, select Payloads and finally select the TegraExplorer.bin payload.
- Once in TegraExplorer, select FirmwareDump.te.- You may use the (VOL +) and (VOL -) buttons to scroll up and down and 
 use the button to confirm your desired selection. button to confirm your desired selection.
 
- You may use the (VOL +) and (VOL -) buttons to scroll up and down and 
- Wait until the dumping process is finished and select Reboot to bootloader/update.bin to boot back into Hekate.
- Your firmware dump will now be in /tegraexplorer/Firmware/.
Mariko
What you'll need:
Steps:
- Place TegraExplorer.binandLockpick_RCM.binin/bootloader/payloads/on your SD card.
- Extract FirmwareDump.zipto the root of your SD card.
- Launch into Hekate, select Payloads and finally select the Lockpick_RCM.bin payload.
- Once in Lockpick, select Dump from SysNAND.- You may use the (VOL +) and (VOL -) buttons to scroll up and down and
 use the button to confirm your desired selection. button to confirm your desired selection.
 
- You may use the (VOL +) and (VOL -) buttons to scroll up and down and
- Once the dumping process is done, return to the main menu and select Reboot to hekate.
- Once in Hekate, select Payloads and finally select the TegraExplorer.bin payload.
- Once in TegraExplorer, select Browse SD.- You may use the (VOL +) and (VOL -) buttons to scroll up and down and 
 use the button to confirm your desired selection. button to confirm your desired selection.
 
- You may use the (VOL +) and (VOL -) buttons to scroll up and down and 
- Select FirmwareDump.te and select Launch Script.
- Once the script is launched, select Dump sysmmc.
- Wait until the dumping process is finished and press the  button to go back. button to go back.
- Select <- Exit explorer and then select Reboot to bootloader/update.bin to boot back into Hekate.
- Your firmware dump will now be in /tegraexplorer/Firmware/.