- Pick a suitable anime model (very important for the booru tags!), eg. WD 1.4, AnyV3 etc..
- Optional, install the "tag complete prompt" extension
- Generate something
The example we'll be using
make sure the image is at least 512x512 minimum for best results
- Mask the face
The most important setting to pay attention to is the "Inpaint masked" and the Denoising strength. Denoising strength would change depend what prompt you're using. Sometimes when you try a set of prompts, it might change the face to much, lowering it can help keeping it consistent.
You can actually delete all your prompts, with the exception any prompts that affects the face, in our case, I'll be leave the prompt, "crimson eyes" in.
Then add in the emotion/facial expression you're trying to get. You can mix and match these to get the desired emo.
Sometimes the changes are very subtle, you can increase the emphases of the prompt by (blush:1.3), if the changes are also messing up the face, you can also lower the denoising strength until it's normal
Inversly, sometime when you combine two or more prompts, and one is overpowering the results you can deemphasize it (blush:0.8)
Here are some I found that works well enough:
|Closed eyes (remove any eyes related prompts for best results)|
Sometimes the model just don't do your prompts. At this point I suggest opening up photoshop and drawing it out yourself, it doesn't need to be good, just needs the basic shape and color. Then just put the new image into inpainting and set the denoising to around ~0.5, mess around with it as needed. You could also use the inpaint sketch tab if you don't want to use an external painting program.