How to update your CFW


If you are on Atmosphere 0.20.1 or lower, please check this guide to update your CFW.

There are two methods when it comes to updating your CFW:


PC Method


Sigpatches need to be updated only on each firmware update, not each CFW update. This is thanks to sys-patch.

You can access your SD card contents via USB by following this guide.

What you'll need:

Steps:
  1. Extract the following files to your SD card:
    • atmosphere-x.xx.x-master-xxxxxxxx+hbl-x.x.x+hbmenu-x.x.x.zip
    • hekate_ctcaer_x.x.x_Nyx_x.x.x.zip
    • SigPatches.zip
      • This file is only necessary if you have updated your firmware.
  2. When asked to overwrite any files, click Yes.
  3. Move fusee.bin to /bootloader/payloads/.
    • If you inject fusee.bin with a payload injector, then update the payload on your injector.

Switch Method


What you'll need:

Setup:
  1. Extract aio-switch-updater.zip to your SD card.
  2. Move sigpatch-updater to the /switch/ folder on your SD card.
Steps:
  1. Enter All In One Switch Updater.
  2. Scroll down to Update Atmosphere and pick atmosphere-x.xx.x-master-xxxxxxxx+hbl-x.x.x+hbmenu-x.x.x.zip.
  3. Select Continue.
    • When asked to overwrite existing .ini config files, select No.
    • When asked to delete all the custom sysmodules startup flags, select Yes.
  4. You will now be asked to download Hekate. Select Yes.
    • When asked to overwrite existing .ini config files, select No.
    • When asked if you want to copy the Hekate payload, select No.
  5. Select Continue to reboot your device in order to finish the update process.
  6. Enter Sigpatch-Updater.
  7. Select Update sigpatches.
  8. Reboot your device.

⬅️ Go Back 🦝
Edit
Pub: 23 May 2021 11:14 UTC
Edit: 29 Mar 2024 17:04 UTC
Views: 426992