The Nissan Qashqai Key Fob Awards: The Most, Worst, And The Most Bizarre Things We've Seen

Reasons Why Your Nissan Qashqai Key Fob Won't Work

The Qashqai has a distinct SUV-like feel due to its larger dimensions, and the 19-inch wheels on Ti and ST-L models can be a bit stiff at times. The front tyres may lose grip on rough surfaces and its CVT can occasionally display wrist-flexing torque steer.

This is generally caused by an unresponsive coin battery that can be replaced in minutes. Make sure that the replacement battery is of the same size, voltage and specification.

Water Damage

Water damage is among the most common causes for a Nissan keyfob to display the "key ID is incorrect" message. The key fob has rubber seals that protect the electronic chip inside. However, prolonged exposure to moisture could cause it not to function properly. This is typically the situation if you've dropped your key fob into the ocean or a pool water pool, but it could occur if it becomes wet from soapy hands or rain.

If official website was exposed to water over an extended period of time and you're not sure, clean it using isopropyl or electronic cleaner. It may also need to be taken to a professional for repair or replacement.

If your key fob requires to be replaced, it's an easy procedure. Make sure you have the proper multipack (CR2032 3V). Open the front and back cases with the help of a small screwdriver. You'll need to take out the clips that hold the metal together and pull out the old battery and put in the new one. Reassemble the fob and replace the mechanical key. Check to see if it functions properly. If it isn't, you will need to go to your local Nissan dealer or an experienced auto locksmith to fix the chip on the key. Fortunately, the chip is not typically damaged by exposure to water and this shouldn't be a huge expense.

Dead Coin Battery

Another reason why the reason your Nissan Qashqai key fob may not work is that the battery in the coin has gone dead. They last for 3 to 5 years, but they will eventually fail if the fob has been frequentedly dropped. You can replace the battery but make sure it is the same voltage and same size as the original. If you choose to use a brand new battery, it may cause the key to be assigned an incorrect key ID. This will stop it from being connected to your vehicle.

The most efficient method of replacing the coin battery on the Nissan Qashqai key fob is by removing the key fob using the small screwdriver with a flat-head. The screwdriver needs to be inserted into a small cut on the bottom of the key fob. Make sure to gently twist the screwdriver to separate the two halves. Remove the old CR2025 battery and replace it with a new one, taking note of the location of the old one in the fob.

Examine the terminals to see if there is dirt or water damage prior to installing the new battery. If there is clean the terminals using some isopropyl ethanol. Also, ensure that the pole cables are connected correctly. They must be connected to the negative and positive poles of the battery respectively.

Diagnostics of a fault

If your Nissan Qashqai's key fob isn't working after exposure to clean water from the tap or rain, this could be a sign there's an issue with the internal chip. You'll need a new keyfob in the event that you can't solve the issue by replacing the battery. If you dropped the key fob on the ground and it stopped functioning immediately it's likely because it has damaged the internal chip. It is possible to get the key fob to work again if you remove and clean the chip with paper towel and isopropyl alcohol and then insert it back into.

One common error you may notice on the dashboard of your car is "Key ID Incorrect." This means that the car cannot recognize the key fob, and will not allow it to start the engine. This problem could be caused in many different ways, including water damage, malfunctions that are not detectable in the key fob circuitry or RFID interference.

The key fob will not function when the 12 volt batteries are dead or don't provide enough electrical current. This can affect your Nissan Qashqai's keyless system, central locking and the ability to start the engine using the key fob. If you're unable unlock or lock the door by hand You should examine the batteries inside your key fob to make sure they're in good condition. Try replacing the battery to reset your transmitter.

Reprogramming

If the key fob was not submerged in saltwater it should be restored to its original state by a simple wash of clean water. You might also try cleaning your electronic chip with isopropyl alcohol or an electronic cleaner. If none of the above works then you might need to replace the key fob.

If your Nissan Intelligent Key is still not functioning, there may be an issue with the connection between it and the car. Start by pressing the ignition key, but without beginning the car. Keep doing this until you see the warning lights flash twice. Then, turn off the vehicle and take off the key.

Open the fob compartment of your vehicle. This is usually located in a door jamb, on the handle of the driver's side, or under an armrest. Find the small button labeled "program" and press it. When the process is complete, you should hear an audible sound.

Now that your Intelligent Key is relinked to the car now is the time to try it out. Stand some distance away from the vehicle and hit all the buttons on the key. If the lights flash and the horn sounds this means that the key has successfully linked to the Nissan. You can also test it near the Nissan.

Edit
Pub: 23 Apr 2024 06:07 UTC
Views: 42