15 Reasons You Shouldn't Be Ignoring Fiat 500 Replacement Key Cost

Fiat 500 Replacement Key Fob

It could be time to replace the battery if your 500 remote key fob isn't working. If you do replace the battery and it continues to stop working the issue is probably elsewhere.

At United Locksmith, we specialize in the creation of new keys for classic automobiles. We have the tools as well as the parts needed for this job.

Dead Coin Battery

The most frequent reason why your Fiat 500 key fob will not lock or unlock the doors is due to a dead battery. The key fob is equipped with an internal battery called a coin cell that is prone to draining quickly in the event that it is not frequented enough. If your remote has started to show signs like a loss in range or stopped working and the battery is not working, it could be dead.

Metal clips hold the battery in place within the key fob. If the clips are not secure, they could cause problems with the contact, which can stop the remote from receiving power. By using a small flathead screwdriver, break the retaining clip outwards to remove the current battery, and replace it with a brand new one. Make sure to use a battery with the same size, voltage and specifications as the original.

The key fob might be damaged or corroded due to exposure to water. Even fiat ducato key programming in soapy water can damage the electronic chip inside. Make sure your key fob is dry.

Water Damage

If your key fob isn't working properly, it may be caused by water damage. The rubber seals on key fobs keep them from getting damaged by a light splash or drizzle of water. However, it is crucial to keep your keys out of the washing machine, the ocean and pool.

The key fob comes with an electronic chip inside it that sends a signal car's immobilizer system. This is the reason why your 500 can start or lock, but when the chip becomes wet, it will no longer function.

If you want to check whether your key fob functional it is possible to clean the internal electronics with isopropyl or an electronic cleaner. It is best to replace a key fob in the event that it is submerged in salt water, rather than trying to fix it yourself.

While a replacement fob could cost a little money, it's much less expensive than paying for your Fiat 500 to be towed to the dealer for repair! Additionally, you can make it yourself in just a few easy steps. Be sure to have the correct battery type before you attempt to open your keyfob. You can find step-bystep directions for any key fob in your car online.

Faulty Chip

The chip located within the key fob communicates with your car's immobiliser unit to ensure the vehicle is only capable of starting when the correct key is used. If the chip is damaged or destroyed the car won't start, no matter what you do.

A chip that is defective can happen due to many reasons, but the most common cause is water damage or the battery being dead. Whatever the reason, it is recommended to delegate this task to a locksmith, as they can replace the chip quickly and at a cost-effective price.

If your key fob does not work after exposure to water that is clean from the tap or rain take the battery off. Clean the electronic component using paper towels. If the key fob still isn't working it's probably to be a damaged chip and is required to be replaced.

Some people will go to their dealer if they require a new Fiat fob. However, this can be an expensive option. If you are seeking a cost-effective method to get your Fiat key fob repaired, look no further than United Locksmith. We have the tools and knowledge required to repair your Fiat key fob in a quick and professional way.

Faulty Receiver Module

Fiat key fobs send an electrical signal to the vehicle, which will unlock and lock doors (and start the car for vehicles with an automatic transmission) up to 50 feet. However there are several things that can cause the fob to cease functioning. This could be due to a dead coin battery or water damage or worn buttons, a receiver module issue, and signal interference or an electronic chip that has failed.

If the fob was in a pocket which has suffered a severe trauma, like being dropped on hard floors or being washed in the washing machine and it isn't able to communicate with the car's Body Control Module (BCM). The BCM is a security device that can only accept signals from genuine keys.

You'll need to replace the fob if this happens. A locksmith professional can handle all aspects of the replacement procedure as well as programming a new one for your 500. They can even offer the fob cloned to work exactly like the original (and costs just less than the cost).

Edit
Pub: 26 Apr 2024 06:55 UTC
Views: 8