TOR CONFIG
Last updated 9 October 2013 for Tor 0.2.5.2-alpha.
(may or may not work for much older or much newer versions of Tor.)
Lines that begin with "## " try to explain what's going on. Lines
that begin with just "#" are disabled commands: you can enable them
by removing the "#" symbol.
See 'man tor', or https://www.torproject.org/docs/tor-manual.html,
for more options
Tor will look for this file in various places based on your platform:
https://www.torproject.org/docs/faq#torrc
Tor opens a socks proxy on port 9050 by default -- even if you don't
configure one below. Set "SocksPort 0" if you plan to run Tor only
as a relay, and not make any local application connections yourself.
SocksPort 9050 # Default: Bind to localhost:9050 for local connections.
SocksPort 192.168.0.1:9100 # Bind to this address:port too.
Entry policies to allow/deny SOCKS requests based on IP address.
First entry that matches wins. If no SocksPolicy is set, we accept
all (and only) requests that reach a SocksPort. Untrusted users who
can access your SocksPort may be able to learn about the connections
you make.
SocksPolicy accept 192.168.0.0/16
SocksPolicy reject *
Logs go to stdout at level "notice" unless redirected by something
else, like one of the below lines. You can have as many Log lines as
you want.
We advise using "notice" in most cases, since anything more verbose
may provide sensitive information to an attacker who obtains the logs.
Send all messages of level 'notice' or higher to /var/log/tor/notices.log
Log notice file /var/log/tor/notices.log
Send every possible message to /var/log/tor/debug.log
Log debug file /var/log/tor/debug.log
Use the system log instead of Tor's logfiles
Log notice syslog
To send all messages to stderr:
Log debug stderr
Uncomment this to start the process in the background... or use
--runasdaemon 1 on the command line. This is ignored on Windows;
RunAsDaemon 1
The directory for keeping all the keys/etc. By default, we store
things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
DataDirectory /var/lib/tor
The port on which Tor will listen for local connections from Tor
controller applications, as documented in control-spec.txt.
ControlPort 9051
If you enable the controlport, be sure to enable one of these
authentication methods, to prevent attackers from accessing it.
HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C
CookieAuthentication 1
######### This section is just for location-hidden services
Once you have configured a hidden service, you can look at the
contents of the file ".../hidden_service/hostname" for the address
to tell people.
HiddenServicePort x y:z says to redirect requests on port x to the
address y:z.
HiddenServiceDir /var/lib/tor/hidden_service/
HiddenServicePort 80 127.0.0.1:80
HiddenServiceDir /var/lib/tor/other_hidden_service/
HiddenServicePort 80 127.0.0.1:80
HiddenServicePort 22 127.0.0.1:22
########## This section is just for relays
See https://www.torproject.org/docs/tor-doc-relay for details.
Required: what port to advertise for incoming Tor connections.
ORPort 9001
If you want to listen on a port other than the one advertised in
ORPort (e.g. to advertise 443 but bind to 9090), you can do it as
follows. You'll need to do ipchains or other port forwarding
yourself to make this work.
ORPort 443 NoListen
ORPort 127.0.0.1:9090 NoAdvertise
The IP address or full DNS name for incoming connections to your
relay. Leave commented out and Tor will guess.
Address noname.example.com
If you have multiple network interfaces, you can specify one for
outgoing traffic to use.
OutboundBindAddress 10.0.0.5
A handle for your relay, so people don't have to refer to it by key.
Nickname ididnteditheconfig
Define these to limit how much relayed traffic you will allow. Your
own traffic is still unthrottled. Note that RelayBandwidthRate must
be at least 20 KB.
Note that units for these config options are bytes per second, not bits
per second, and that prefixes are binary prefixes, i.e. 2^10, 2^20, etc.
RelayBandwidthRate 100 KB # Throttle traffic to 100KB/s (800Kbps)
RelayBandwidthBurst 200 KB # But allow bursts up to 200KB/s (1600Kbps)
Use these to restrict the maximum traffic per day, week, or month.
Note that this threshold applies separately to sent and received bytes,
not to their sum: setting "4 GB" may allow up to 8 GB total before
hibernating.
Set a maximum of 4 gigabytes each way per period.
AccountingMax 4 GB
Each period starts daily at midnight (AccountingMax is per day)
AccountingStart day 00:00
Each period starts on the 3rd of the month at 15:00 (AccountingMax
is per month)
AccountingStart month 3 15:00
Administrative contact information for this relay or bridge. This line
can be used to contact you if your relay or bridge is misconfigured or
something else goes wrong. Note that we archive and publish all
descriptors containing these lines and that Google indexes them, so
spammers might also collect them. You may want to obscure the fact that
it's an email address and/or generate a new address for this purpose.
ContactInfo Random Person <nobody AT example dot com>
You might also include your PGP or GPG fingerprint if you have one:
ContactInfo 0xFFFFFFFF Random Person <nobody AT example dot com>
DirPort 9030 # what port to advertise for directory connections
If you want to listen on a port other than the one advertised in
DirPort (e.g. to advertise 80 but bind to 9091), you can do it as
follows. below too. You'll need to do ipchains or other port
forwarding yourself to make this work.
DirPort 80 NoListen
DirPort 127.0.0.1:9091 NoAdvertise
Uncomment to return an arbitrary blob of html on your DirPort. Now you
can explain what Tor is if anybody wonders why your IP address is
contacting them. See contrib/tor-exit-notice.html in Tor's source
/etc/resolv.conf## distribution for a sample.
DirPortFrontPage /etc/tor/tor-exit-notice.html
Uncomment this if you run more than one Tor relay, and add the identity
key fingerprint of each Tor relay you control, even if they're on
different networks. You declare it here so Tor clients can avoid
using more than one of your relays in a single circuit. See
https://www.torproject.org/docs/faq#MultipleRelays
However, you should never include a bridge's fingerprint here, as it would
break its concealability and potentionally reveal its IP/TCP address.
MyFamily $keyid,$keyid,...
A comma-separated list of exit policies. They're considered first
to last, and the first match wins. If you want to replace
the default exit policy, end this with either a reject : or an
accept :. Otherwise, you're augmenting (prepending to) the
default exit policy. Leave commented to just use the default, which is
described in the man page or at
https://www.torproject.org/documentation.html
Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses
for issues you might encounter if you use the default exit policy.
If certain IPs and ports are blocked externally, e.g. by your firewall,
you should update your exit policy to reflect this -- otherwise Tor
users will be told that those destinations are down.
For security, by default Tor rejects connections to private (local)
networks, including to your public IP address. See the man page entry
for ExitPolicyRejectPrivate if you want to allow "exit enclaving".
ExitPolicy accept :6660-6667,reject :* # allow irc ports but no more
ExitPolicy accept *:119 # accept nntp as well as default exit policy
ExitPolicy reject : # no exits allowed
Bridge relays aren't listed in the
main directory. Since there is no complete public list of them, even an
ISP that filters connections to all the known Tor relays probably
won't be able to block all the bridges. Also, websites won't treat you
differently because they won't know you're running Tor. If you can
be a real relay, please do; but if not, be a bridge!
BridgeRelay 1
By default, Tor will advertise your bridge to users through various
mechanisms like
https://bridges.torproject.org/
If you want to run
a private bridge, for example because you'll give out your bridge
address manually to your friends, uncomment this line:
PublishServerDescriptor 0
0- DNSPort for resolve dns Domain Name anon with tor
DNSPort 5400
Dns safety security ???
ClientRejectInternalAddresses 1
1- Tor client port
SOCKSPort 50900 IsolateClientAddr IsolateClientProtocol IsolateDestAddr IsolateDestPort IsolateSOCKSAuth
Transparent Tor Proxy
TransPort 9040 IsolateClientAddr IsolateClientProtocol IsolateDestAddr IsolateDestPort IsolateSOCKSAuth
Control port ???
ControlPort 9051
2- Nodes
ExcludeNodes {AE},{AU},{CA},{VA},{IN},{CN},{NL},{NZ},{IO},{VG},{AF},{AL},{DZ},{AS},{AQ},{AR},{GB},{US},{RU},{IE},{IT}
ExcludeExitNodes {AE},{AF},{AL},{AX},{AQ},{AU},{AS},{AR},{GB},{US},{CN},{RU},{NL},{NZ},{IN},{CA},{VA},{DZ},{DE},{IT}
ExitNodes {CH}
StrictNodes 1
StrictNodes 1
3- Socket Safety Hacks
TestSocks 1
AllowNonRFC953Hostnames 0
WarnPlaintextPorts 23,109,110,143,80
RejectPlaintextPorts 23,109,110,143,80
use acceleration for cryptografic OpenSSL
HardwareAccel 1
Schedulers Vanilla
Client Only
ClientOnly 1
RunAsDaemon ???
RunAsDaemon 0
AvoidDiskWrites 1
VERIFICARE se necessita file di config. da mettere path?
Define Virtual Network Mask e automap
AutomapHostsOnResolve 1
AutomapHostsSuffixes .exit, .onion
VirtualAddrNetwork 10.192.0.0/10
ConnectionPadding 1
ReducedConnectionPadding 0
ExitPolicy ???
ExitPolicy reject :
ExitPolicy reject6 :
File Conf. da App Andr.
GeoIPFile /data/user/0/pan.alexander.tordnscrypt.stable/app_data/tor/geoip
GeoIPv6File /data/user/0/pan.alexander.tordnscrypt.stable/app_data/tor/geoip6
DataDirectory /data/user/0/pan.alexander.tordnscrypt.stable/tor_data
Log notice file /data/user/0/pan.alexander.tordnscrypt.stable/logs/Tor.log
FascistFirewall 0
New Circuit
UseEntryGuards 1 ???
NewCircuitPeriod 30
MaxCircuitDirtiness 600
CircuitsAvailableTimeout 86400
EnforceDistinctSubnets 1
HTTPTunnelPort 8118 IsolateDestAddr IsolateDestPort
NON USARE QUESTO> Socks5Proxy 127.0.0.1:50900
DormantCanceledByStartup ???
DormantCanceledByStartup 1
Only IPV4
ClientUseIPv4 1
ClientUseIPv6 0
UseBridges 1
ClientTransportPlugin obfs4 exec /bin/obfs4proxy
Bridge obfs4 109.105.109.147:13764 cert=KfMQN/tNMFdda61hMgpiMI7pbwU1T+wxjTulYnfw+4sgvG0zSH7N7fwT10BI8MUdAD7iJA iat-mode=2
Bridge obfs4 109.105.109.165:10527 cert=Bvg/itxeL4TWKLP6N1MaQzSOC6tcRIBv6q57DYAZc3b2AzuM+/TfB7mqTFEfXILCjEwzVA iat-mode=1
Bridge obfs4 109.105.109.147:13764 cert=KfMQN/tNMFdda61hMgpiMI7pbwU1T+wxjTulYnfw+4sgvG0zSH7N7fwT10BI8MUdAD7iJA iat-mode=2
Bridge obfs4 109.105.109.165:10527 cert=Bvg/itxeL4TWKLP6N1MaQzSOC6tcRIBv6q57DYAZc3b2AzuM+/TfB7mqTFEfXILCjEwzVA iat-mode=1