What's Holding Back From The Fiat 500 Replacement Key Cost Industry
Fiat 500 Replacement Key Fob
If your remote key fob has stopped working, it might be time to replace the battery. However, if you replace the battery and it continues to stop working then the issue is probably elsewhere.
United Locksmith specializes in the production of new keys for classic automobiles. We have all the tools and parts necessary to perform this service.
Dead Coin Battery
The most frequent reason why your Fiat 500 key fob will not lock or unlock the doors is a dead battery. The coin cell battery in the key fob is likely to drain quickly when you don't utilize frequently enough. If your remote began to show signs of weakness such as a loss of range or stopped working completely, the battery is probably dead.
Metal clips keep the battery in inside the key fob. If the clips aren't tight, they can cause problems with the contact, which can stop your remote from receiving power. Use a flathead screwdriver remove the retaining clip and remove the old battery. Make sure you use a replacement with the same type of voltage, dimensions and specifications as the original battery.
Exposure to water can cause the key fob to corrode, or even become damaged. Even a small bath in soapy, warm water can cause damage to the chip. Make sure your key fob is dry.
Water Damage
Water damage may be the reason behind your key fob not working properly. The rubber seals on key fobs protect them from getting damaged by a tiny splash or drizzle of water. However, it's crucial to keep your keys from the washing machine, the ocean and even the pool.
The key fob has an electronic chip that sends a message to the immobilizer of your car. This is the reason why your 500 can start or lock, however in the event that the chip becomes wet, it will no longer function.
If you're looking to determine whether your key fob functioning, you can clean the internal electronics using isopropyl or an electronic cleaner. It is recommended to replace the key fob if it is submerged in salt water, rather than trying to fix it yourself.
Although a replacement fob may cost a little money, it's much less expensive than having to pay for your Fiat 500 to be towed to a dealership and fixed! Plus, you can do it yourself with several easy steps. Be sure to have the correct battery type before attempting to open your key fob. This is a job that's much easier than it looks, and you can find step-by-step instructions on the internet for nearly any key fob for your car.
Faulty Chip
The chip inside the key fob communicates with the immobiliser on your vehicle to ensure that the vehicle will start only when the proper keys are inserted. If the chip is damaged, or corrupted in any way the car won't start.
A chip that is damaged can happen due to several reasons, but the most common reason is water damage or an unresponsive battery. Whatever the reason, it is recommended to delegate the job to a locksmith as they will be able to replace the chip for you swiftly and at a cost-effective price.
If your key fob stops functioning after exposure to clean tap water or rain, take out the battery and clean the electronic component using a paper towel to ensure it is fully dry before putting it back into. If the key fob doesn't work it's most likely an issue with the chip and will need to be replaced.
fiat key replacement near me will go to their dealer if they need a new Fiat fob. However, this can be a costly option. If you are seeking a cost-effective method to have your Fiat key fob repaired, look no further than United Locksmith. We have the equipment and know-how required to repair your Fiat key fob in a timely and professional manner.
Faulty Receiver Module
Fiat key fobs transmit an electronic signal to the vehicle which will unlock and close doors (and start the car for vehicles with an automatic transmission) up to 50 feet. However, there are a few factors that can cause the fob to stop working. This could be due to a dead battery, water damage, worn out buttons, a receiver issue, signal interference, or a malfunctioning chip.
If the fob is stored in a place that has been subject to extreme trauma, like falling on hard floor or being washed in the washing machine and it isn't able to communicate with the car's Body Control Module (BCM). This is because the BCM is an extremely secure system that will only accept signals from a genuine original key and not another.
If this is the case, you will need to replace your fob. A professional locksmith can handle every aspect of the replacement process as well as programming a new one for the 500. They can even provide the fob cloned to work exactly like the original (and costs only a fraction of what it would cost).