ASRock RAID TUTORIAL
How to setup RAID array for Intel
Upon powering on the PC, please start hitting the [Del] key continuously to enter the BIOS menu
Select [Boot] → Select [CSM] → Set [Launch Storage OpROM policy] to [UEFI only]
Select [SETTINGS] → Select [Advanced] → Select [Storage Configuration] → Set [SATA mode] as [RAID/Optane Mode]
Press [F10] → Select [Yes] to save and exit, the PC will restart.
Upon powering on the PC, please start hitting the [Del] key continuously to enter the BIOS menu,
Select [SETTINGS] → [Advanced] → select [Intel(R) Rapid Storage Technology]
Select [Create RAID Volume] (Note: All of the data will be wiped, please backup your data.)
Select [RAID Level]: RAID0 or Volume if available.
Select all available disks.
Click [Create Volume]
You can see the RAID Volumes has been created at this moment, take a picture to show later in ticket.
How to setup RAID array for AMD
Upon powering on the PC, please start hitting the [Del] key continuously to enter the BIOS menu,
Select [Settings] → Click [Advanced] → Set up [SATA mode] as [RAID mode]
Select [Settings] → Click [Advanced] → Click [AMD PBS] → Set [NVMe RAID mode] to [Enabled]
Select [Boot] → Click [CSM] → Set [CSM] to [Disabled]
Press [F10] → Click [Yes] to save and exit, the PC will restart.
Upon powering on the PC, please start hitting the [Del] key continuously to enter the BIOS menu,
Select [SETTINGS] → [Advanced] → select [RAIDXpert2 Configuration Utility].
Select [Array Management]
If the [Create Array] is grey out, it means the current disk is set in RAID array already. Please click [Delete Array] to re-create RAID.
Select [Check All] → Click [Delete Array(s)]
Set [Confirm] as [Enable] → and click [YES]
Note: All of the data will be wiped, please backup your data.
The existing Arrays have been deleted.
Click [Create Array]
Click [Select RAID Level]: RAID0 or Volume if available.
Click [Select Physical Disks]
Select the RAID disks. For example: setup [Physical Disk 0:1:3]& [Physical Disk0:1:7] as [Enable] → Click [Apply Changes]
Select [Create Array]
The RAID volume has created.