The Lesser-Known Benefits Of Peugeot Keys
Peugeot 208 Key Replacement
It is recommended to leave the replacement of Peugeot keys for 208 to auto locksmiths equipped with the required equipment and expertise. They can create and program new keys faster than a dealership would and at a lower price.
If your key fob stopped locking or unlocking your doors it could be due to a dead coin battery. However, there are many other reasons why the key might be malfunctioning.
Dead Coin Battery
A dead battery can stop your Peugeot 208 from locking and unlocking, and also stopping it from starting the engine. In this scenario you'll need to employ the alternate method of starting described in your vehicle owner's manual.
Another reason your 208 might not be starting is that the spark plugs have been damaged. The spark plugs ignite fuel to start the engine. They have a limited lifespan. If they're not used enough they will eventually fail.
There is a simple solution to this issue. Examine the voltage of your battery using a multimeter. If peugeot replacement key fob than 11.5 volts, then you need to replace it. It is also necessary to clean the contacts of the battery if it has corrosion. This can be accomplished by removing the rubber cover from the two battery terminals and then using a wirebrush, you can remove any damaged parts of the battery. Then, you should connect the cables for the positive and negative poles.
Water Damage
If your 208 does not start and the battery hasn't gone flat, you should look at the spark plugs. You might find that they are dirty and they don't spark. This can be fixed by cleaning the spark plugs in the workshop.
Peugeot automobiles are equipped with a transponder that is compatible with the immobiliser. This ensures only the correct key is able to turn the engine. If the chip inside the Peugeot key is damaged, it won't send the correct signal to the vehicle.
This is a typical issue that is often caused by water damage. This is a common problem in more cold climates where the car has been exposed to snow or rain. If this is the case, you should seek out a reputable auto locksmith who has all the tools and equipment needed to reprogram the new key. They will also have the latest technology and machinery needed to create a Peugeot smart key. The process shouldn't take longer than 15 minutes.
Contacts to the battery are not working properly.
Peugeot replaced the old transponder chips using a new model that utilizes electronic components that are mounted on a circuit board. This new system works great when it's fresh, but over time the circuit boards begin to wear out and stop functioning properly.
This could stop the immobiliser chip from working and causing your car to not start. Contact a Peugeot specialist, or a locksmith if this is the case.
The most frequent issue is when the battery in the key fob starts to die. This causes the blade of the key to stop feeding into your lock. A locksmith from your vehicle can replace the battery and cut a fresh blade for you, this is normally a quick fix.
Faulty Receiver Module
It could be that the receiver module is defective If your Peugeot key fob isn't working after being dropped on the floor, exposed to a sudden downpour or accidentally washed. The receiver is responsible for sending radio frequency signals to the onboard computer, which is responsible for controlling the centralized locking system in your Peugeot vehicle.
The key fob itself is fitted with rubber seals that block water from reaching the electronic chip inside. The chip can be damaged by water in the event that it is exposed water for a prolonged period of time. Submerging the key fob in ocean water on the beach or throwing it into the water can be especially damaging because of the high salt content.
The module must be replaced if your Peugeot spare key isn't working anymore. This is only done by an expert auto locksmith or Peugeot specialist. In contrast to other vehicles, Peugeot keys are protected by a unique immobilizer system that requires the correct coding to begin the engine. This is the reason that you should only rely on a Peugeot locksmith to create and program an alternative.
Computer on-board is not working properly
The on-board computer in your Peugeot is responsible for a number of the systems inside your car, ranging from power windows to the airbags. The on-board computer displays an error code when something goes wrong. This code is stored inside the system and will stay there until the issue has been resolved. Often, this will involve replacing the computer on board.
One of the main causes of the light flashing is loose or corroded connection in the airbag sensor. This could be due to wear and tear, age or exposure to salt and moisture. This problem should be addressed as soon you can, because an airbag that is not functioning could be dangerous in the event in the event of an accident.
If you see an error message stating that the card is not found on your Peugeot, the key battery inside the key fob could be weak or dead. This will stop the key fob sending a signal to disable the vehicle's immobilizer. Test this by pressing the unlock key on the fob's key, then trying to start your vehicle. If this doesn't work then the battery in the key is in need of replacement.