10 Meetups About Peugeot Car Key Replacement You Should Attend
New Key For Peugeot 207
Peugeot 207 is one of the most sought-after cars on the road. It's a small car that has plenty of character and style.
Over time, however they could develop problems. These can be quite serious if they aren't addressed promptly.
Replacing a key with some kinds of vehicles can be a very expensive and stressful, especially when the vehicle has been stolen.
Lost Keys
Peugeot is a brand of cars that is well-known for producing top-quality vehicles. They have a strong security system that blocks any misuse of the vehicle. The system is based on the transponder chip, which is secured with a unique code. The immobilizer then recognizes the right key to turn on the vehicle. This makes it difficult for thieves to make use of stolen Peugeot keys.
If you've lost your car keys, an auto locksmith expert can assist. They will come to your location and cut you a brand new spare car key. They can also program the key to work with Peugeot's immobilizers as well as lock barrels. This is less expensive than going to an auto dealer.
The process for getting an additional Peugeot key is fairly simple for most models (except for the 107 and 108 Bipper). You'll need the PIN code of your vehicle to obtain a new key. This can be a challenge especially if you only have the time to wait for the locksmith to arrive.
Transponder Fault
The immobilizer feature on your Peugeot 207 verifies that the key you used to start your car is the one it expects. It does this by sending an indication from the microchip inside your key to the ignition switch through an antenna. This is a safety feature that stops your car from being stolen.
The warning light will either flash or glow on the console if the immobilizer receives an error code that is different from the one it anticipates. This means that there is a problem and you may be required to take the vehicle to an Peugeot dealer to reset it and have the keys reset.
If you bring your key to a garage that offers this service, they will scan it and determine whether the transponder is damaged. This is a free service and they will tell you that your Peugeot isn't running because there is a problem with the system.
There is generally no need to be concerned unless you accidentally swapped the original Peugeot key case for a different one (and lost the transponder), or if you damaged your key after it was wet. The most frequent problems with immobilizers are caused by a dead battery, a broken key antenna, or a electronic problem in the engine and module computer.
Key Blade Wobble
Peugeot decided to try something completely different in the beginning of 2000. Instead of the dependable type of carbon encased transponder chips, they came up with a flip key design. Unfortunately, the new design came with numerous issues, and one of the major ones is key blade wobble. This happens when the key blade which is essentially the mouth piece that goes into the lock first, wears out. peugeot 207 car key inside the lock stops flipping the mechanism and the key will no longer be able to enter the lock.
Fortunately, this can be easily fix using a new key blade, cut correctly to code. It is important that the blade is copied from your old key, and not a generic replacement since it won't give you a genuine shape and will wear exactly in the same manner as your original key did. Your local Car Key Man auto-locksmith can offer you a new blade to help you solve this problem.
Key Blade Damage
Quite often, the key blade gets damaged, or more accurately the'mouth' key, starts to wear out. This could cause the key become stuck in the lock if it isn't removed as quickly as it should be. This can lead to the dreaded "Immobiliser Failure that appears on your dashboard. There are many myths about how to fix this issue however the reality is that the replacement of the key blade is needed.
This is a fairly cheap task that can be handled by your local Car Key Man Auto Locksmith. They'll need to cut a new key blade and put it on your Peugeot 207.
A good Peugeot flip key will last about five years before tiny hairline cracks begin to appear on the circuit board that generates the transponder chip signal. These cracks will not affect the chip, but they could cause other problems for your Peugeot flip key.
The flip mechanism that holds the blade in place isn't very reliable. This is especially relevant to the Peugeot Partner, Peugeot 107 and Peugeot 407 models. This is due to the fact that the key's 'flip mechanism' has changed from the old model, carbon-encased chips. This change has caused four major issues that can prevent your Peugeot key from functioning.