15 Things You Didn't Know About Ghost Immobiliser Install
Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for the CAN bus. It's discrete, doesn't employ LED indications or key fobs and is concealed within the vehicle's wiring.
The user can also deactivate the system temporarily using Transport Mode when renting their vehicle. This guide will walk you through the installation of an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key hacking attacks, cloning and relay attacks. The system is directly connected to your car's ECU and is protected by a unique PIN code that you can choose. It is not detected by thieves using diagnostic scanners or other advanced methods. It is not able to be disabled by cutting circuits.
The system is simple to use, however professional installation is advised to ensure a perfect connection to the ECU of your vehicle. An approved installer from Thatcham can assist in the installation and programming of your Ghost system. They can also recommend an alarm or tracking system to complete the protection package for your vehicle.
To avoid the accidental deployment of airbags or short circuits To avoid an accidental deployment of airbags or short circuits, the installer must remove your battery. After this is completed, the installer can safely begin work. Hand tools are the most basic to be used for precise connections. A multimeter can be used to check electrical values. Cable ties and insulation tape are also vital for protecting connections and keeping wiring tidy. In addition, the user's manual offers specific instructions specifically tailored to the Ghost Immobiliser model you have.
It is crucial to select a grounding location that is free of any paint or debris during installation. Installers should also ensure that the immobiliser's wires, CAN H and can L are connected to the appropriate ECU ports. Depending on the model, these wires may need to be soldered or plugged into. Using a high-quality connector is recommended to ensure a durable and reliable connection.
auto ghost immobiliser can be turned on by the client after the installation is completed. This allows the vehicle to be used by valet parking attendants or mechanics without needing to know the pin code. ghost 11 immobiliser has to press the icon for service on the dashboard five times in two seconds. Once this is done the system will verify with 5 signal indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's a great option for those who rent out their vehicles frequently through platforms like Turo. Having an immobiliser can also lower insurance costs since it significantly decreases the risk of theft.
Getting Started
If you're seeking a solution to secure your vehicle from thieves, you can't go wrong with an autowatch ghost immobiliser . It protects your vehicle from being started even the theft or copies the key. It is possible because of its advanced technology that stops the engine from starting until the correct PIN code has been entered.
The device connects to the vehicle's bus network, CAN which allows direct communication with the ECU. It uses the buttons on your steering wheel and dashboard to create a unique sequence, that only you can understand. This makes it impossible for anyone else to start your car. This is the ultimate security system that protects your car's pride and joy and preserve its value when you want to sell it in the future.
Installing a ghost ignition is an easy procedure, but it is important to follow the directions carefully to avoid electrical issues and system malfunctions. First, you must locate and determine a constant 12V power source and an appropriate grounding point on the vehicle's chassis. Then, you can start connecting the wires to the immobiliser. Use high-quality connectors, and soldering methods to create a solid connection. Also, make sure to insulate the connections by using heat shrink tubing or insulation tape to shield them from short circuits in electrical power and other issues.
Once the wires are connected, you can connect the battery and start the engine to test whether the immobiliser works. Once everything is working properly you can place it in a safe location under the dash or elsewhere in the vehicle. Be sure to cover it properly to stop any thief from taking advantage of it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified this means it complies with the highest standards of security and is an excellent deterrent to car thieves. It is impervious to hacking and key cloning and cannot be disabled without a code. The device is also easy to use and can be put into the service valet mode to ensure that your vehicle will not be activated when you take it in for service or an MOT.
Wiring
The Ghost Immobiliser, a cutting modern security system, was designed to prevent vehicle theft. It communicates with your vehicle's ECU and directly connects to the CAN bus. Contrary to other aftermarket systems which require the removal of circuit components the Ghost Immobiliser won't interfere with any of the factory settings of your vehicle.
It's also completely undetectable to thieves using diagnostic scanning devices. The system doesn't transmit or receive radio frequency signals and instead uses CAN data to communication with your ECU. It doesn't require any modifications to your current key fobs.
Enter your sequence for disarming (either two or one button) and turn on the ignition of your car to use Ghost Immobiliser. The indicator will flash twice to verify that you've entered the correct code. After that, you are able to start your car and drive away in peace.
Once installed, the Ghost Immobiliser guards your vehicle from hacking or key cloning, while preserving its value. In Transport Mode you can temporarily disable the Ghost Immobiliser in case you need to hand your car over for service or valet park.
To complete the Ghost Immobiliser installation, you'll need to locate an energy source that is constant (12V) and a grounding point. Make sure that both are well-insulated and safe to touch. It's also recommended to use cable tie to secure and bundle the wires. This will decrease the chance of being tampered with by thieves. To avoid mistakes, double-check these points and mark them using labels or tape. It's important to inspect every connection for signs of wear and tear. Loose connections can lead to malfunctions in the system, so make certain that they are securely in place and securely insulated. Don't forget to test your Ghost Immobiliser after installation has been completed. This will confirm that the unit is operating correctly and that all connections and insulation are secure. If you encounter any issues, be sure to resolve them immediately.
Testing
The Autowatch Ghost Immobiliser is an innovative vehicle security system that seamlessly into your car's ECU to stop unauthorised engine start. The innovative technology protects your vehicle from hacking and key cloning as well as other methods commonly used by thieves to steal vehicles. The Ghost also works in tandem with other alarm and tracking systems to provide the most complete protection for your vehicle. The Ghost's unparalleled features and subtle design make it a preferred choice for car lovers and security-conscious drivers alike.
It is crucial to follow the procedures for installation to ensure proper integration of Ghost Immobiliser. A good starting point is to consult the vehicle's wiring diagram that serves as a guideline to locate and connecting the wires required. Then, you'll need to identify the power source and grounding points. Once you've located them, you will have to mark them to make them easy to locate when installing. It is also important to use top-quality tools and materials. Basic hand tools can assist you in making precise connections. A multimeter will verify electrical values and guarantee security. Insulation tape and cable tie ensure that all connections are neat. Finally, a user manual will give specific guidelines specific to your Ghost model.
It is important to test the system prior to installing it. Enter the PIN code into the system, and then start the vehicle. This will ensure that the immobiliser is working as it should and prevent unauthorised vehicle starts. This step should be done regularly as part of your routine inspections of your vehicle to ensure the system is always functioning properly.
After the installation is completed, you can begin driving your vehicle with confidence. The Ghost will keep your precious possessions safe from potential thieves and ensure that no one can escape with your car without the correct PIN. The Ghost can be linked to an approved Thatcham tracker that identifies any attempts to steal or tamper with. This allows you to track your vehicle if it is stolen.
The Ghost is compatible with a variety of vehicles, including those from most major manufacturers. If you are interested in securing your car with this innovative device, call Monty's Locksmith today to find out more about our installation and service options. We are a TASSA registered installer, which ensures that we adhere to strict standards for installing our products. This assures insurance companies, customers and law enforcement agencies that all installations are performed safely and in a correct manner.