The Reason Why You're Not Succeeding At Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to decay or rust as aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass


The damaged glass in your windows could cause severe damage to your home and even be fatal. It is essential to take the time to ensure that you're doing everything you can to ensure that your windows are in good repair.

For single pane windows it is fairly easy to replace them, and the new window will usually fit inside the frame that was previously installed easily. However when you have double-pane windows that are secured by internal beading it will be more difficult to take out the existing panes and install new ones. In this situation, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you begin working on the glass, so that any shards fall on the fabric rather than on the floor where they can be trodden under and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to block water and drafts from getting into the home until a professional can come out and fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap between the door and the window is large, you might need to consider a security screen that also has windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. As time passes, they may develop a variety of issues, including sliding. window repairs sagging uPVC window can cause issues with light, draughts and even security. It is crucial to act as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to unblock the windows so you can access the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the fit of your window, tighten the screws to keep them in the right position.

If you aren't able to move the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to lose tightness. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles may also become loose. Often this is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to shut the window and do an experiment fitting. The corner joints of the sash must align with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

It is crucial to take action if you get up each morning to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a relatively easy fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue is, old caulking may have to be removed. When it is time to uPVC repair, you must be careful not to over-caulk. This can make your window more difficult to clean and decrease its energy efficiency.

Make sure that the drainage holes are free of debris inside them and that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the problem is with the seal than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with a breeze, it may be the hinges that are at fault. These are easily replaced by any competent DIYer and can usually be completed in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It's very simple to change a window hinge, but it's easier if someone else helps hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should be opened.

The issue can be caused either due to opening the window in the wrong way or a faulty installation in the factory. This can often be resolved by sending us a picture via our website and we will be more than happy to give you advice.

It is also important to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the possibility of a window sticking and help prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. Firstly the hinges, again due to wear and tear can become misaligned, this can cause gaps to develop between the sash and the frame. If they are beyond repair, it may be necessary to have them realigned. The interlock, which is on the hinge side of the window, may also be misaligned, and again it is possible to just give them a thorough clean, however in some cases it might be necessary to have these replaced.

The second most frequent reason for draughts are the window seals. These are prone to wear or damaged over time, and will allow air to escape through these gaps. Replacement of these with high-quality weatherstripping will help to stop draughts. Another alternative is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures, and also lessen the possibility of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. They can help keep cold air out and keep your home warm and cozy!

With a bit of regular maintenance and repair, your upvc windows will continue to provide a great level of insulation and security for your home. It is crucial to recognise that all windows have a lifespan and eventually, they will reach the point when it's more efficient to replace them than repair them. If you encounter any issues with your window made of upvc, it's best to consult a professional as soon as you can.

Edit
Pub: 07 Feb 2024 01:03 UTC
Views: 5