20 Myths About Car Key Cover Fiat 500: Dispelled

Fiat 500 Key Fob Replacement

If your 500 keyfob stops functioning, try another to see if it is able to be detected by the car. If it does, then the issue is most likely to be with the original fob's battery, or water damage.

First, replace the battery. The "+" side should be facing downwards.

Dead Battery


Most of the time when a fob won't work, it's because the battery is dead. This isn't a problem to solve and most fobs warn you when the battery is depleted. You can find instructions for most car fobs YouTube or in the owner's guide. You can also bring it to a locksmith in your area or the dealer who sold it to you to replace it.

Sometimes a fob will stop functioning due to a malfunction on the internal circuit board. It is rare, but it does happen. The internal chip can be damaged when you drop the fob onto something hard. It can be a problem if you have an aftermarket fob and it doesn't work. In this scenario it is required to go to a dealer or locksmith to get the key reprogrammed to work with your 500.

One 2012 FIAT FIAT 500 flip key remote - resembles Ilco with lock, unlock and trunk buttons - new replacement keyless entry (will require cutting and program by locksmith).

Chips damaged

A key fob with the fiat 500 number is an wireless device that sends the signal to the car to start after you press the button. It is equipped with a microchip that contains information about the code which is required to communicate with the car. If the chip is damaged, it won't transmit the correct code, and the car will not start. A locksmith can repair this type damage. United Locksmith can complete this service on both classic and modern models, so do not hesitate to call us.

G28 Car Keys can buy a new fob and have it programmed professionally by a locksmith. This is a lot less expensive than visiting a dealer and will function just as well. You'll need to provide certain information to the locksmith, such as the year your vehicle was manufactured and the model.

If you are not sure of the best solution to this issue, try scratching the chip with the help of a US dollar bill. The copper in the bill is abrasive enough to remove oxidation and dirt, but it will not cause any damage to the microchip. The chip may not be repaired in the event that it has been physically damaged. This could happen if you drop it or get it pushed over by your vehicle.

Water Damage

Water damage is likely to occur on your device, whether you dropped them in the pool unintentionally or left them in a pocket while swimming, or splashed water over them during a rainy afternoon. Even if it's just an ounce of water on the key, it can cause major problems for the electronic components of the key.

It is possible to solve this problem by taking the fob out and cleaning it with a towel. Once the fob is dry and clean, you can replace the battery and it will begin functioning normally.

You can also take your fob to a local locksmith or auto shop to get it professionally cleaned and programmed. These experts will be able to utilize special equipment to make sure that the key fob works with the computer system in your car.

When your Fiat 500's key fob fails to function, it can be stressful and frustrating. You may be tempted to visit a dealer to replace your key fob however, this can be costly and inconvenient. A locksmith can replace your key fob with no need to visit the dealership. Because of this, they are a better choice than the dealership.

Pairing Issues

If you lose your keyfob, or it ceases to function and nothing else seems to be wrong, it may be the chip. This could be due to water damage, a dead battery or it may just need reprogramming.

This can often be done by following the steps in your owner's manual. If you're having difficulty or your manual isn't working, you should have an automotive locksmith complete this task. This ensures the chip isn't damaged and is the most affordable solution.

Another issue facing 500 owners is that the key fob won't lock the car. This could be a problem when you want to fill up at the gas station. Some owners have stated that their 500's locking system failed and they've required replacement of the entire intermediate steering shaft. Fiat has actually mentioned this problem in a technical bulletin (TSB).

If you're experiencing issues with your Fiat vehicle, a reputable locksmith can help. They can duplicate your existing key or design an entirely new one that can lock and start the car. They are able to do this without looking at your old key, and it's usually less expensive than buying a key from the dealer.

Edit
Pub: 25 Apr 2024 18:32 UTC
Views: 39