14 Businesses Doing An Amazing Job At Double Glazing Lock Repairs
Double Glazing Lock Repairs
A good quality lock on your doors and windows will stop burglars from getting into your home. In general, they don't enjoy breaking glass or slipping through windows that are not closed.
However, some double glazing owners have experienced issues with their door lock or window lock after it was installed. These issues can be resolved without the need for a new double glazing.
Broken or faulty locks
A locksmith can repair your uPVC window or door lock if damaged or is not working properly. They will be able to fix the striker plates, hinges and locks on your double-glazed. They can also move the cylinder in order to correct any misalignment that may be causing your handle to function properly.
The mechanism might be jammed if the key fits in the lock, but it does not turn or be difficult for you to insert. Dirt or grease can be trapped in the mechanism. If this is the case, it might be possible to clean the lock and then lubricate. Make use of a dry lubricant, like graphite or teflon, not oil, because oil attracts dirt and cause it to stick to the inside mechanism. After having lubricated, insert the lock key into the lock and turn it. The lubricant needs to be absorbed into the mechanism, and the lock should spin effortlessly.
A faulty lock can also be caused by loose screws within the lock mechanism. They can become loose and fall out, or even break completely, preventing the lock from being able to perform as it should. A screwdriver is a tool to tighten the screws but care must be taken not to tighten them too much as this can cause damage to the internal components.
A broken lock can be hazardous for you and your family. This is especially the case if you have children. They can open the door without your knowledge, giving them access to your house. If you are worried about this happening, then a locksmith who is vetted can provide fast and efficient assistance to secure your double-glazed doors.
Misty Glaze is a professional uPVC company in Lancing that repairs all types of damaged and broken mechanisms on both uPVC windows and doors. We can also reconfigure your uPVC or double glazing locking system to meet your particular needs, which means that in many cases replacement doors and windows are not necessary.
Handles that are broken or damaged
As part of their overall security plan, many double-glazed windows come with a multipoint lock. This is an excellent option for those who are concerned about burglars who are opportunistic and trying to gain entry into their home. It's also worth asking your installer about anti-lift locks that can be installed with the locks already in place and ensure that your window is locked in a closed position.
Handle locks are often damaged or fail. They are the first component that a criminal will use to force open your window. Luckily, the good news is that this is one of the most simple parts to repair.
Modern uPVC and aluminium handles operate a multi-point locking system called Espagnolette which is designed to resist forced entry. This upgrade to security is typically provided as an additional option on new uPVC window installation. Older uPVC and aluminium handles can be upgraded to lock bolts that shoot, again as an optional feature on all new double-glazed windows.
It is important to repair a handle as soon as possible after it has been damaged. Faulty handles can prevent the window from closing properly and allow drafts in. It could also be a weakness that thieves who are opportunistic could take advantage of and put the belongings of your family and your personal belongings at risk.
The process of repairing the malfunctioning mechanism begins by opening the frame of the window and removing the damaged handle. The gearbox is then accessed to determine the kind of gearbox used to open the handle. double glazing repair near me allows to replace the handle that matches the profile and internal window frame mechanisms.
After the mechanism has been repaired the handle can be put back together using the original screws. However, we recommend replacing them with more long screws to ensure a more secure fit. The final stage is to apply a coating of clear sealant to shield the handle from further rust. After that, your window will be functional again, and at less than the cost of replacing the entire window.
Hinges that are broken or faulty
If your windows aren't shut properly, draughts can enter your home, the security barriers will become weaker and there's the risk of water damage or damp. Window hinges that fail or fail are a common issue and can be easily repaired.
If your windows made of uPVC won't close or open and close, it's likely the hinges need to be repaired or replaced. A lot of window manufacturers will require you to buy a new window unit to resolve this issue, but we are able to replace the hinges and save you money.
Window hinges may break from repeated use or they could be weakened by corrosion over time. If you find a broken hinge, it is important to take steps to prevent further damage by being careful not to push the window open or closed.
Knowing the type of hinge you have will help you identify the right parts to repair it. The most common types of window hinges include Maco, Mila, Roto and other brands. Talk to a professional before purchasing parts that won't work with your existing hardware. This could cause more damage.
Faulty hinges can be a big issue for your uPVC windows and doors. They can be a major source of noise, and they can also allow water infiltration which could damage your windows.
Verify whether the pin barrels on both sides of the hinge are aligned. If it's not tapping the headpin, use a hammer in order to make an incline in the hinge barrel. This will help keep the pin in the right position. Ask a friend to hold the doors as you take off hinge screws and hinges. Replace the hinges using those of a matching size and then attach the screws using glue. Finally fix the hinges using weights or clamps while the glue dries.
Once the hinges have been fixed and repaired, you should be able to re-install the door and attach the handle. Replace the screws using wood dowels of the same size as the original screw to ensure that they match.
Glass that is Broken or Faulty
uPVC Windows can be damaged in time, despite the fact they are extremely effective in keeping cold out and retaining heat. This can include damaged or broken glass and defective locks. This is a problem that can be costly when neglected. It can also detract from the appearance of your home and may lead to a loss of insulation, so it is essential to fix any damage as soon as possible.
If your glass has cracked but not shattered it is usually possible to repair it yourself with the proper tools and methods. First, make sure the surrounding area around the glass is clear so that any shards won't harm anyone and aren't an accident hazard. Then, take any broken pieces and dispose of them in a safe manner. Apply masking tape across the entire area. This will stop shards of glass from sticking to your skin and splintering when you move them. If you're dealing with a double-pane glass it's a good idea to fit the glass pane before gluing it back in place to ensure that you'll have enough room to finish the project.
Before applying the glue, wipe the surface of the damaged frame and glass with a an unclean, dry cloth. Follow the application and curing instructions that differ from one product to the next. You may need to clamp the cracked glass using clamps that are lightweight and designed to hold delicate materials, depending on the angle.
Once the adhesive has fully cured, carefully install the glass into the window frame. Make sure that it is in line with the frame edge and that there aren't gaps between the glass sash and the frame. Be careful to avoid flexing the window while it's reinstalled, as this can weaken the seal and lead to water infiltration and condensation.
Get in touch with a professional glazier, such as O'Brien(r), to arrange a replacement if your glass window is completely shattered. It's essential to act swiftly when you notice broken glass.