How Much Can Peugeot Keys Experts Make

Peugeot 208 Key Replacement

It is best to leave the replacement of Peugeot keys 208 to auto locksmiths who have the equipment and know-how. They will be able to make and program new keys much quicker than a dealership and at a lower price.

If your key fob stopped locking or unlocking your doors, it could be due to a dead battery in the coin. There are also other reasons that the key could be malfunctioning.

Dead Coin Battery

A dead battery can stop your Peugeot 208 from locking and unlocking, and also stopping it from starting the engine. If this is the case, you'll need to make use of the backup starting procedure that is detailed in the owner's manual to your vehicle.

The spark plugs could also be worn out. The spark plugs are responsible to ignite the fuel that starts the engine. However they are limited in their life span. They will eventually break down if they aren't used frequently enough.

There is an easy solution to this problem. Check the voltage of your battery with a multimeter. If the voltage is lower than 11,5 volts, it's time to replace it. It is also necessary to clean the battery's contacts in the event that it is damaged by corrosion. This can be done by removing the rubber cover from the two battery terminals, and then using a wirebrush to remove any damaged parts of the battery. Then, reconnect the cables to the positive and negative poles.

Water Damage

If your 208 isn't starting and the battery isn't running, then make sure whether the spark plugs are in good working order. It could be that they're dirty, which causes them not to spark. The spark plugs can be cleaned in an workshop.


Peugeot cars are equipped with transponder keys that integrates with the car's immobiliser system. This ensures that only a valid key can turn the engine. If the chip inside the Peugeot key is damaged, it will not send the correct signal to the vehicle.

peugeot key replacement near me www.g28carkeys.co.uk is a common problem that can be caused by water damage. This is a common problem in more cold climates where the car has been exposed to rain or snow. If this is the case, you should seek out a reputable auto locksmith who has all the tools and equipment required to change the key's programming. They will also have the latest technology and machinery required to create the Peugeot smart key. The process shouldn't last more than 15 minutes.

Contacts with the battery may be damaged.

Peugeot replaced the transponder chips using a new model that is based on electronic components that are mounted on a circuit board. The new system works great when it's new, however the circuit boards deteriorate over time and stop working properly.

This could prevent the immobiliser chip from triggering, so your car won't start. Contact a Peugeot specialist, or a locksmith, if this is the case.

Another common issue is when the battery for the key fob starts to die, this causes the blade of the key to stop getting into the lock. A locksmith from your car will replace the battery, and cut a new blade for you. This is a quick solution.

Faulty Receiver Module

If your Peugeot key fob stopped working after dropping it on the floor, being exposed to a sudden rain or accidentally washing it the wrong way, it could be due to a malfunctioning receiver module. The receiver module is responsible for transmitting radio signals to the onboard computer which controls the central locking system of your Peugeot vehicle.

The key fob itself has rubber seals that prevent water from getting to the electronic chip inside. However, prolonged exposure to water may be able to penetrate these seals and cause damage to the chip. The high salt content in the ocean water or pool could cause damage to the key fob when it is submerged.

The module must be replaced if your Peugeot spare key does not work anymore. This is only done by a Peugeot specialist or a professional auto locksmith. Peugeot keys are, unlike other vehicles, are secured by an immobilizer system. This requires the right codes to start the car. This is why you should go with a knowledgeable Peugeot locksmith to take on the job of creating and programming the replacement.

Computer with a problem on board

The computer on board of your Peugeot is responsible for a variety of functions in your car including power windows and airbags. When something goes wrong in these systems, it will usually show a code that identifies the problem. This code is stored inside the system and stays there until the issue has been resolved. Most often, this involves replacing the onboard computer.

The most common cause of the warning light of the airbag to flash is corrosion or loose connections in the sensor. This could be due to wear and tear, ageing or exposure to salt and moisture. It is crucial to get this issue resolved as soon as possible, as an airbag that is not functioning properly could be dangerous in the event an accident.

If your Peugeot is showing a card detected as not present error, then the key battery inside the key fob may be dead or weak. This will stop the key fob sending a signal that will disable your vehicle's immobilizer. Test this by pressing the unlock button on the key fob, and then trying to start your car. If this fails then the battery on the key must be replaced.

Edit

Pub: 29 Jun 2024 00:15 UTC

Views: 9