5 Laws Everyone Working In Peugeot 208 Key Replacement Should Know
Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob has stopped working one day it could be due to a dead coin battery or water damage and receiver module issues or a faulty electronic chip. These are all easy solutions and you'll be able to bring your car back to speed in a matter of minutes!
Car keys can also be damaged due to the blade getting worn. This is an easy fix if you visit your local Car Key Man Auto Locksmith and let them install the new blade for you.
Battery
The battery for the key fob in your Peugeot 308 can sometimes die or become weak enough to send a strong signal to the car. The key fob might be inoperable and prevent you from locking or unlocking your doors or even starting the engine. You'll need a replacement battery for your key fob to correct this.
You'll need to purchase the replacement battery from an auto parts store or a local hardware store. Make sure that the battery is brand new and not stored on the shelf too long. A fresh new battery will have more capacity and will be able to send a stronger signal to the car.
After replacing the battery try unlocking the doors and locking them with the key fob. If the doors do not unlock, it's likely that the receiver module inside the car is the culprit. The local Peugeot dealer can reprogramme the receiver module.
The chip inside the key fob might be damaged. It's possible to harm your key fob if you drop it on the ground or expose it to water. The rubber seals that protect the chip from moisture might get worn out over time, particularly if the key fob is exposed to water for lengthy periods of time like submerging it in the ocean at the beach. To avoid this it is recommended to keep your key fob clear of water and out of water.
Water Damage
If your key fob gets soaked regardless of whether you dropped it into the pool or fumbled it into a puddle, don't think it's a lost cause. The key fob is protected by rubber seals, however, prolonged exposure to water may damage its electronic chip. Since water is such an excellent conductor, any water that makes it inside the key fob may cause a chain of short circuits which will eventually ruin the chip. After removing the batteries, clean the contacts with isopropyl and dry them completely before putting them back in.
A dead battery may be the reason why your Peugeot 308 won't start. Jumper cables are a great option to restart the engine if you have an additional car. If the battery is the problem, it will need to be replaced.
A defective receiver in your car may also hinder it from receiving the signal from the key fob. The key fob might be damaged or there may be a problem with the antenna, wiring or the key fob itself. If you're using a new key fob it may require to be programmed to your vehicle. If you cannot fix the issue on your own then contact a professional technician. A trained technician in the field will be able to identify the issue quickly, and resolve it quickly.
Radio Interference
Interference can trigger symptoms such as a fob that's not being recognized or has a narrow range. It could be radiated or conducted, with the former being caused by power supply cables and speaker wiring that is too close to electrical components. Generally speaking, rerouting G28 or moving them away from the components can resolve the issue.
It's unlikely that someone is watching your key fob's signal in the intention of stealing your vehicle It's possible, however, that radio interference has drowned out the signal. Fortunately, this is easy to repair.
If your key fob isn't being recognized by the system, you can try replacing the battery. Also, ensure that the battery you are using is the correct size and type. Incorrectly sized batteries could harm the fob.
These devices may interfere with the key signal if they use the same radio frequency. Avoid attaching these devices to your key fob.
Pairing Issues
A car's remote keyless entry system contains an antenna that receives radio frequency signals from the key fob. It is not possible to start your vehicle if the receiver is not functioning properly, even if your key fob is functioning and is reprogrammable. The issue could result from a variety of reasons, such as the battery of a coin that is dead and water damage. The receiver could also be failing because of a software bug or internal damage to the key.
The coin battery in your Peugeot 308 keyfob has probably died. This battery can be replaced, however you must make sure that it is the proper battery for your key fob. If you use a battery that is not correct, it could cause more problems with the key fob, therefore it is best to choose the original battery or an alternative that is similar in size, voltage, and specification.
Another reason the reason why your Peugeot 308 key fob might not be working is that it has been paired to another vehicle. This could happen if you have given your key fob to a friend or if the key has been used to unlock and start other vehicles. This can be solved by reprogramming the key fob using an OBDII scan. This tool will request information about your car, for example, its VIN or engine type. It is essential to enter the correct details.