Five Things Everybody Does Wrong Concerning Fiat 500 Replacement Key Cost
Fiat 500 Replacement Key Fob
It's possible to change the battery if the 500 remote key fob isn't working. However, if you replace the battery and it doesn't work, then the problem may be elsewhere.
United Locksmith specializes in the creation of new keys for classic cars. We have the tools and components required for this type of service.
Dead Coin Battery
The most common reason your Fiat 500 key fob will not unlock or lock the doors is a dead battery. The battery of the coin cell inside the key fob can be depleted quickly when you don't use it often enough. If your remote starts to show signs of loss in range or stopped working or not responding, then the battery could be dead.
ignition keep the battery in in the key fob. If the clips aren't secure, they can cause contact issues which will prevent your remote from receiving power. Using a small flathead screwdriver, pull the retaining clip outwards to remove the battery and insert a new one. Make sure to use a battery with the same voltage, size and specifications as the original.
The key fob might be damaged or corroded by water exposure. Even a brief bath in soapy water can harm the electronic chip within. Make sure your key fob is dry.
Water Damage
If your key fob isn't operating properly, it could be caused by water damage. The rubber seals on key fobs protect them from being damaged by a slight drizzle or splash of water. However, it is essential to keep the keys of your car away from the ocean, washing machine, and even the pool.
The key fob is equipped with an electronic chip that sends a signal car's immobilizer system. The chip is what allows the 500 to lock and start. If it gets wet, however it will not work.
If you want to check whether your key fob still working You can clean the internal electronics with isopropyl or electronic cleaner. However, it's better to purchase a replacement from a dealer instead of trying to fix a key fob that has been submerged by salt water.
While a replacement fob can cost a bit of money, it's much cheaper than paying for your Fiat 500 to be towed to the dealer for repair! You can also fix it yourself by following some simple steps. Be sure to have the correct battery type before attempting to open your keyfob. There are step-by-step directions for every car keyfob online.
Faulty Chip
The chip in the key fob communicates with the immobiliser on your vehicle to ensure that the vehicle will start only when the correct keys are inserted. If the chip is damaged, or corrupted, your car won't start regardless of what you do.
Damage to the water or a dead battery are the two most frequently cited reasons for an unreliable chip. It is recommended to leave the repair to a professional locksmith, who can repair the chip quickly and at an affordable cost.
If your key fob will not work after exposure to clean tap or rain water, remove the battery. Wipe down the electronic component using paper towels. If the key fob will not function, there's the possibility that it has an issue with the component and requires to be replaced.
Some people go to their dealer if they require a new Fiat fob. However, this can be expensive. United Locksmith is the best choice if you would like to have your Fiat keyfob fixed at a reasonable price. We have all the tools and experience needed to fix your Fiat fob in a timely and professional way.
Faulty Receiver Module
Fiat key fobs send an electrical signal to the vehicle that will unlock and close doors (and start the vehicle for those with an automatic transmission) up to 50 feet. There are many reasons why the fob might not function. This can be caused by a dead coin-battery or water damage, worn out buttons, a receiver issue, signal interference or a malfunctioning chip.
If the fob was placed in a pocket that endured extreme trauma, such as falling on hard floor or getting washed in a washer, it may not be able to communicate with the car's Body Control Module (BCM). The BCM is a security device that only accepts signals from genuine keys.
You'll need to replace the fob in case this happens. A professional locksmith can handle the entire process of replacing keys including programming a new key for your 500. In fact, they'll provide you with a clone key that functions exactly the same as the original fob (and costs only a fraction of the cost).