10 Tips For Ghost Autowatch Immobiliser That Are Unexpected

Autowatch Ghost Immobiliser

The renowned Ghost Immobiliser provides your vehicle with a high level of protection against key cloning hacking, theft and hacking. This TASSA-certified system is unnoticeable by thieves and blocks your vehicle from starting.

This silent device makes use of buttons on your car's steering wheel as well as the doors and the centre console to let you create a unique and changeable PIN code sequence up to 20 characters. The code must be entered first before the car can start.

Easy to install

With car crime increasing and cloning tools readily available, it is more important than ever to safeguard your vehicle. Our Autowatch Ghost immobiliser is a discrete and efficient aftermarket solution to guard against key-cloning and car theft. what is ghost immobiliser The Key Lab is virtually undetectable to thieves and operates via existing buttons in the steering wheel or door panels, as well as the central console. This lets customers create a unique disarming sequence like a credit card that must be entered before a car is able to be started or driven away. This makes the system nearly impossible to identify and is unaffected by jamming or spoofing devices that are used in other systems on the market.

The installation of the Ghost unit is a highly skilled procedure and must only be done by an approved installer. The unit is carefully integrated into your vehicle's CAN bus system which ensures it can communicate directly to the ECU. This allows the Ghost to be installed without having to alter factory settings and ensures that it can't be hacked by a burglar using signal boosters or other techniques.

Once the Ghost is installed the new and improved sequence to disarm must be inputted to start your car. Press the service button five times in a matter of 2 seconds, but ensure that you don't hold it for too long. The system will flash twice to indicate that Transport Mode is active. This feature is perfect for classic, sports or prestige vehicles that need to have their security system temporarily disabled during transportation or maintenance.

After the Transport Mode is activated your immobiliser will become disabled and you cannot activate it again by entering the PIN code. This feature is great for those who want to store their vehicles over the winter to prevent them from being stolen or to avoid having to pay higher insurance premiums.

There aren't any keyfobs, LEDs or other indicators that can help you locate it.

The Ghost immobiliser is a discreet device that protects your joy and pride from car thieves by utilizing buttons on your dashboard or steering wheel to input a discreet pin code prior to starting the engine. It can be linked to an app on your phone to arm and disarm remotely. It also prevents signal relays, ECU swapping, and key cloning. It's simple to install and can be incorporated into a variety of vehicles. It's also extremely discreet and can be hidden in places that are difficult to reach, such as behind the dashboard, or in the steering-wheel trim.

It's a great choice for high-performance vehicles because it will disable the vehicle's ignition when a wrong pin code is entered, thus preventing thieves from driving off with your joy and pride. The device will even send an alert to your mobile in the event that you've left your car unattended in public, providing you with peace of mind while you're away from your vehicle.

Like other immobilisers Ghost doesn't require any extra fobs or LEDs and can be concealed easily in a difficult-to-find place inside your vehicle. It is extremely resistant to detection since it directly communicates with the CAN data network in your vehicle. It also doesn't emit radio signals, making it undetectable by RF scanners or signal jammers.

It is designed to be tamper-proof and weatherproof. It can also stand up to extreme temperatures. It's also impossible to tamper with by cutting the wires or dismantling the unit. Moreover, it doesn't require any circuit cuts to work which means it's inaccessible to organised thief gangs that use diagnostics devices to detect the security systems fitted to. It is not affected by diagnostic equipment that checks the CAN data for the presence or absence of a security system.

No circuit cuts

With no LED indications or key fobs that can reveal its location the ghost device is hidden in your vehicle, underneath the dashboard or steering wheel and utilizes buttons inside your car to create an individual PIN code that has to be entered before the engine can start. This means that even if a criminal does have your keys they can't drive the car away as they would not know the correct PIN code sequence. The device also doesn't transmit radio signals, which means that organised gangs of thieves using diagnostics devices won't be able to recognize the device.

This cutting edge immobiliser is TASSA approved and could help lower the cost of insurance, particularly for modified vehicles that have been modified by their owners. It also prevents key theft and ECU switching, which means the only possible way for a burglar to take your pride and happiness is to take it away. it.

Since the system doesn't make use of the factory key fobs or the dashboard buttons it is a completely silent device, it communicates with your ECU through the CAN data circuit that operates completely silently and does not display any indication that it is fitted. This means that a thief could not make new key fobs or swap out the ECU to cause your vehicle to start and therefore negates any other methods of theft that have been used in recent years, such as key cloning, RFID scanning and code theft.

If you have forgotten your PIN code Our engineers have provided a reset emergency for the device that lets you enter "service mode". This will allow the dealer or technician to temporarily start and drive your vehicle enabling them to carry out maintenance work, MOTs, or valet parking without needing to enter the PIN code a second time. Once the technician has finished their work or you have taken possession of your vehicle, just enter the PIN code and the device will exit service mode based on speed and time.

No radio signals

The Ghost immobiliser, in contrast to other security systems for cars, does not rely on alarm systems or key fobs to block vehicles from getting started. It communicates with the vehicle's ECU, the CAN data circuit as well as other circuits to prevent the engine starting. It's a discrete solution that isn't affected by key-cloning techniques or radio frequency scanning techniques used by thieves to avoid security devices. It can be paired with tracking devices to improve the security of your vehicle. You will also be alerted when there is any attempt to tamper or steal.

The Autowatch Ghost, a TASSA certified device, is an insurance-approved and offers the best protection against key hacking and cloning. It is controlled via an app on mobile devices and is secured for security. It also has a safe emergency PIN override. It's a safe, discreet and cost-effective way to safeguard your vehicle from theft.

Ghost is not without problems. One of the most frequent issues is that people struggle to find the correct disarm sequence. The device requires input via buttons already in your vehicle, like buttons on the steering column or console. Some people may find it difficult to remember or get wrong, especially when the device is being first used. It is recommended to read the manual that comes with the device to learn this and practice the disarming process before driving the vehicle.

Another issue is that certain vehicles have problems with the CAN data connection, which can impact the functionality of the Ghost. This could be due to defective sensors or a damaged OBD port. It is recommended to have the system tested again prior to using it to determine if there are any issues with the connection to CAN.

It is simple to change the PIN code

The Ghost is an excellent product that has enjoyed a great reception on the market. However changing the pin code can be confusing. The device is programmed by the installer at the time of installation, however customers might want to alter it for various reasons. For example, they might prefer an alternative button that disables the device or not want their installer to know. They may also dislike their current pin code. The good news is that the switching to a different pin number is incredibly easy. Follow these easy steps to find out how.

Please note that you will need to turn on the vehicles ignition but do not turn on the engine! The process takes only about a minute to complete. The vehicle will then return to normal operation.

Edit
Pub: 06 Dec 2024 06:44 UTC
Views: 19