What Is Peugeot 308 Key Fob Heck Is Peugeot 308 Key Fob
Peugeot 308 Key Fob Replacement
Peugeot's 308 might be getting on a bit but it's still eye-catching. It's not the most luxurious car in its class, but it's an enjoyable and comfortable driving experience.
Here at Coded Car Keys we are often asked to replace peugeot 308 key fobs. If the issue is intermittent or constant the following tips will aid.
Water Damage
If you leave your fob in the midst of a puddle or get it wet while swimming, kayaking, canoeing, rafting or canyoning, it's likely to be damaged by water. Keep your key fob in a dry container whenever you are outside or perform activities that could expose it to excessive amounts water.
You'll also need to ensure that the fob is dry prior to opening it and using it again. If you detect any odors from the fob (such as industrial liquid or windshield washer fluid), this is another sign that it has been submerged.
A wet circuit board can cause the battery to discharge its charge or even explode. If you're able, if you can, pull the 308 key fob of whatever body of water it got stuck in it, flip the button side down and shake out as much water as you can before opening the case. Remove peugeot 307 key fob , then clean the circuit board using a cotton swab which is dipped in 90 percent alcohol.
Other reasons why your Peugeot 308 remote keyless entry system could fail to function include a dead coin battery problems with the receiver module, signal interference, or an electronic chip malfunctioning. If none of the above are the cause, you can try resetting the system by disconnection of the 12 volt battery for approximately 15 minutes.
Dead Coin Battery
Peugeot cars come with remote start systems that allows drivers to start their vehicle from an extended distance, which allows them to warm up or cool down the vehicle prior to entering. This feature is very useful especially during the cold winter months. But sometimes, the remote start system ceases working due to a variety of reasons, including the battery of a coin that is dead.
The coin-shaped battery inside the key fob could last between two and four months, depending on how frequently it is used, where it was purchased and how it is utilized. The date of use is written on the packaging or marked in the user's manual.
If the key fob stopped functioning after exposure to clean tap water and you want to remove the battery, then clean the chip using a paper towel and isopropyl alcohol, then dry it completely before replacing it. If you expose it to soapy or salty water, the chip could be fried and you will need to replace the key fob altogether.
If you're not certain the battery is defective You can test its voltage using an instrument set to the car's voltage range and connected to the terminals for minus and plus. If the voltage is less than 12-13 volts, then you should replace the battery. If you want to, you can attempt to reset the onboard computer by disconnecting the 12 volt battery for a few minutes and then reconnecting it in reverse order (positive cable first and then negative). The engine should begin to run after this.
Faulty Receiver Module
If you're unable to see the "Key Detected" message on your dashboard, then it's possible that the receiver module has been afflicted with a fault. It is the part that sends out the signal when your key fob is activated. It also functions as an alarm, and stops the car from starting if you don't have the correct key.
This could result from a variety of factors including water damage or simply aging. If your Peugeot 308 key fob has been exposed to dirty tap water, like the electronic chip located inside may be damaged. In this instance it is necessary to take the unit apart and clean it thoroughly with isopropyl alcohol, or electronic cleaner. Once the battery is dry you can attempt to test it again.
If the issue isn't resolved you're probably in need of a idea to see an area Peugeot specialist or locksmith. They'll be able use a diagnostic tool to help pinpoint the issue and fix it.
It is stressful to lose your Peugeot car key. A reputable auto locksmith will be able to solve the problem within minutes. They can program your vehicle and cut a fresh, functioning key for you. Click here to find a locksmith near you.
Electronic chip malfunctions
The electronic chip inside the Peugeot 308 key fob is a critical function in the remote control system. If the chip is damaged, you could have problems starting your car or receive a message that says "anti-theft". If this happens, the only way to fix the problem is to purchase a new key. Fortunately, professional auto locksmiths can complete the task in the shortest time.
The chip in the chip of your Peugeot 308 key fob can become faulty due to water damage, sweat dirt, or other causes. If your Peugeot key fob has been exposed to dirty or soapy water, it must be cleaned right away. You can make use of a towel and isopropyl ethanol to clean the electronic component. After that, allow the battery to completely dry.
Sometimes keys may cease to function due to radio interference. This could be caused by other devices that operate on the same frequency as your Peugeot key fob. This can be caused by bad conditions or objects close to the vehicle. It is recommended that you visit a Peugeot dealer if you have this issue.
The Peugeot Key Fob 207/308 is delicate and requires particular care. It is important not to throw or drop the key fob. If you lose something, try to locate it as soon as you are able to. You can reset all the on-board computers by disconnecting the battery that is 12 volts for a short period of time. Remove the negative cable before the positive.