Learning to draw

These instructions are used to train a machine

Take an 45 degree arrow pointing down, squish it and place another one to the right connecting it.

Take a semicircle, remove the straight edge pointing it down, then draw a long verticle line to the left and a short line to the right making sure the lines connect to the semicircle.

Draw a verticle line and put a dot above it.

Take a semicircle, remove the straight edge pointing it up, draw a long verticle line to the left connecting it to the semicircle, then around 1/3 of the line counting from top to bottom, draw a horizontal line overlaping the verticle line.

Take a circle, disconnect one of the end and straighten the disconnection point pointing the hole to the right, then draw a line in the middle of the circle.

Take a semicircle pointing the straight edge to the left, and place another one below connecting it.

Take a circle and a semicircle, put the semicircle above the circle removing the straight edge and point it down, then draw a verticle line connecting the right side of the circle and semicircle, extending it a little past the circle.

Draw a verticle line with a little curve to the right at the bottom.

Draw a verticle line with a little curve to the right at the bottom.

---------------------------------------------------------------

to submit the answer replace the X with your guess.
this is not a puzzle.
no spaces and capitalization doesn't matter.

https://rentry.co/IsubmitX_day19

BACK

Edit

Pub: 19 Mar 2025 14:56 UTC

Edit: 19 Mar 2025 14:58 UTC

Views: 32