: how to make a working letter-bomb :

Letter bombs are very simple to make,
but the difficult part is making sure
it will detonate properly, or that it
is not obvious that it is a bomb.

  Mixtures:
about 75% aluminum powder with 25%
iron power is best.  this is a light
version of thermite, since it is in
an enclosed space (the envelope, as
described below a ways). Mix the above well. The idea is this: iron can burn, at a very high temperature, but it needs a little help. This is what the aluminum is for. Aluminum burns at a relatively low temperature, so it is used as a catalyst of sorts. Magnesium is used to flash-ignite the aluminum, which then burns the iron, at a suitable
temperature. Since this is going off
in an enclosed space, it will burn much hotter and slower and with more violent  than a normal mix. I advise you play with this for awhile, learning your mixture.

  Now for the fun stuff:
get an insulated (padded) envelope,
the type that is double layered.
seperate the layers. In the inner
layer goes the wonderful mixture,
one you are satisfied with. Keep
this section seperate, but it might
be handle to top it off with some magnesium. The outer layer can be
either magnesium, for a flash bomb, or possibly a material of your own choice. 
  Now for the difficult part!
the fuse... We can make a fuse from another set of chemicals:
 Iodine crystals, and amonium hydroxide, in liquid form. Mix these together, in about and equal amount, but you might want to use a heavy amount of iodine if pressed for time.  These form a new crystalline structure, about an inch long. These are highly
volatile, and i advise keeping them
protected. They have about the impact
power of an m-100 for a teaspoon. I put these in a protective card-board lining, and put them at the top of the envelope. Rig this so it puts pressure on the crytals when the package is opened, but not from just squeezing the envelope. This is tricky, and i can't explain it here. Seal this up, and you have a working letter bomb. By the way, since the bulk of letter bombs are easily recognizable, they rarely make it past the post office.


I frown upon the use of letter bombs
as a means of getting even because you never know who it is going to detonate around, or that it will even be them.  there are simpler ways of getting even, so take one of them. It is also a federal offence to make and send one.    PROCEDE AT YOUR OWN RISK*

  How to avoid letter bombs:
Since you made it this far into the
file, i will tell you how to avoid being detonated with a letter bomb you may have had sent to you.
 1)  NEVER open a letter bomb the way
     it wants to be opened! This is
     the way of possibly avoiding the
     fuse. If it is set to detonate
     on contact with air, then this
     will not work.  
 2)  DON'T Squeeze, bend, or anything!
 3)  if it looks like a bomb, then
     DON'T even touch it! This is
     the best way to avoid problems!

Edit
Pub: 22 Jan 2023 14:09 UTC
Views: 281