Find Out What Citroen C1 Replacement Key Tricks Celebs Are Using
Citroen Berlingo Key Fob Troubleshooting
Citroen Berlingo Multispace fills a niche in the market for people carriers. Its sliding rear door makes it easy to fit into parking bays, and its robust cabin can withstand more abuse than many of the more expensive competitors.
If your key fob was submerged in soapy water or saltwater It may not work again, even after a new battery and changing the program. The internal chip is damaged by exposure to water.
Water Damage
Shake your key fob to remove as much water as you can. Lay it flat with the button side facing up and let it drain for a few minutes while you wipe it clean using a cloth. This will stop any condensation from damaging the electronic chip.
If the dashboard warning light that appears like a vehicle with an engraved key symbol appears on your Mk 2 or Mk 3 Citroen Berlingo then it could indicate an immobilizer fault. This is a security device in the vehicle that stops thieves from wiring hotspots. If this is the case you'll need to visit an Citroen dealer or a certified mechanic to resolve the problem.
A continuous engine warning light may indicate that the electric power assisted steering system is failing. If this is the case then you must stop the car and ensure that the pressure in the oil is fine and the temperature isn't too high before you start it. If citroen c3 keys continues, you'll need to consult an authorized Citroen dealer or mechanic to resolve the issue.
Dead Battery
The most common reason for the key fob not functioning on your Berlingo is a dead battery for the coin. The button cell inside the key can be easily replaced however it is essential to use the right voltage, size and type of battery. A cell that is not compatible can cause damage to the circuit. A dead battery for a coin-cell could also disable the anti-theft feature. This is a safety measure that prevents the engine being started without an actual key.
If the key fob does not respond to the lock button even after replacing the battery it could be because the receiver module is defective and not communicating with other modules in your vehicle. OBDII scanners can identify the issue.
If the key fob is still not responding, try reprogramming it. To do this, follow the instructions in the owner's manual. It should work fine once it has been updated.
Troubleshooting
Citroen Berlingo owners are generally pleased with the reliability of their vehicle. As with all vehicles, there are a few issues that can arise. One of the most common is a dead key fob battery. Fortunately, this is easy to find and can be repaired within a few minutes. Other problems include a worn-out button, water damage to the electronic chip or the signal being distorted or a remote receiver module with a fault.
It is important to know that not all key fob batteries are created equal. Certain batteries are made from inferior materials, and can cause damage to the remote key fob, or other electronic components in your vehicle. Make sure you only use batteries of the same type and voltage as the original battery. Make sure that the new battery fits correctly. When inserting the battery into the slot, ensure that the positive (+) face of the battery is facing upwards.
If you see an exclamation point in the form of the shape of a triangle on your dashboard, it means that there is an issue with the electric power-assisted driving system in your vehicle. If this warning illuminates while driving, it's advised to seek help from a certified mechanic or Citroen Berlingo (incl Multispace) dealership.
Radio Interference
Radio interference could be the cause your key fob's not working immediately. This is a common problem caused by devices that use the same frequency as your remote control. Certain wireless security systems, such as LED lights aftermarket, can interfere with RF signals. Consider moving these devices to another room if you have them at home.
In addition to devices using the same frequency, there are also environmental factors that can interfere with a car's key fob. Metal objects, for instance, can interfere with the signal strength. Rainy weather can also cause the fob's antenna to bend, leading to an ineffective signal. In some cases even if the fob is located close to the car it may not respond to radio signals.
Check the battery to make sure the health of your key fob. It must be in good health, and the contacts should be free of corrosion. A corroded or damaged connection is the primary reason the fob's keypad does not respond to radio signals coming from a vehicle. A depleted battery may cause the fob to malfunction. If the issue is still present after replacing the battery the antenna may be faulty. A locksmith can look over the keyfob and make repairs.