10 Ghost Autowatch Immobiliser Related Projects To Expand Your Creativity
Autowatch Ghost Immobiliser
Ghost Immobiliser is a renowned product that safeguards your vehicle from key-cloning hacking and theft. This TASSA-verified system is undetectable by thieves and blocks your vehicle from starting.
This silent device uses buttons on your vehicles steering wheel as well as the doors and the centre console to allow you to set a unique PIN code that you can change up to 20 characters which must be entered first before the car can start.
Easy to install
It is more essential than ever to secure your vehicle. With car thefts increasing, and cloning devices readily available, it is essential to protect your vehicle. Our Autowatch Ghost immobiliser is a discrete and efficient aftermarket solution to protect against key-cloning and car theft. The unit is virtually invisible to thieves, and functions via buttons on the steering wheel or door panels. This allows customers to create an exclusive disarm sequence that is like credit cards, which have to be completed before the vehicle can begin or be driven away. This makes it almost impossible to identify and is not affected by blocking devices or spoofing devices as with other systems.
Installation of the Ghost unit requires a highly skilled installer. The unit is carefully incorporated into your vehicle's CAN bus network, ensuring it communicates directly to the ECU. The Ghost can be installed without affecting the factory settings. It is virtually impossible for thieves to evade the system by using signal boosters.
Once the Ghost is fitted with a new and improved disarm sequence must be entered to start your car. Press the service button 5 times in two seconds, but make sure you don't hold it down for too long. The system will then blink twice to signal that Transport Mode has been activated. This feature is ideal for classic, sports & prestige vehicles that need to have their security system temporarily disabled during transportation or servicing.
Once Transport Mode is activated, the immobiliser is disabled and cannot be reactivated by entering your PIN again. This feature is ideal for those who would like to store their vehicle during the winter months, and avoid being stolen by thieves, or having to deal with monthly insurance premiums that increase.
No key-fobs or LED indications to give away the location of the vehicle.
The Ghost immobiliser is a discrete device that protects your pride and joy from car thieves by using buttons on your dashboard or steering wheel to enter an unobtrusive pin code prior to starting the engine. It can be connected to an application on your phone to arm or disarm remotely. It also prevents signal relays, ECU swapping, and key copying. It's simple to install and can be integrated to a variety of vehicles. It's also extremely discreet and can be concealed in a hard-to reach location such as behind the dashboard or inside the steering wheel trim.
This is a great choice for high-performance vehicles since it will disable your vehicle's ignition if wrong pin code has been entered. This will stop thieves from driving away with your pride and joy. The device can send an alert to a smartphone if the car is left unattended while in public. This will give you peace of mind when you are away from your car.
The Ghost is unlike other immobilisers because it doesn't require any additional fobs or LED indicators. It can also be easily hidden in a hard-to-find area of your vehicle. It is extremely resistant to detection because it communicates directly with the CAN data network of your vehicle. It also doesn't emit any radio signals, so it's not detected by RF scanners, or signal jammers.
It is designed to be weatherproof and tamper-proof. It is also able to stand up to extreme temperatures. It's also impossible to be tampered with by cutting the wires or removing it. Furthermore, it doesn't require any cuts in the circuit to function, so it's undetectable to organised thief gangs that employ diagnostics devices to detect fitted security systems. It's also not affected by auto diagnostics equipment that is professional that checks the CAN data system for the presence of an alarm device.
No circuit cuts
With no LED indications or key fobs to give away its location the ghost device is hidden in your car, under the steering wheel or dashboard and uses buttons in your car to make an individual PIN code sequence which must be entered before the engine can begin. The thief cannot drive away the vehicle even having your keys because they don't know the correct code. The device doesn't transmit radio signals, so organised gangs of thieves using diagnostics reading tools are unable detect it.
This innovative immobiliser is also TASSA approved and can reduce the cost of insurance, particularly for vehicles that have been customised by their owners. It also stops key theft and ECU switching, meaning that the only method for a criminal to take your pride and happiness is to take it away. it away.
As the system does not utilize the factory key fobs or the dashboard buttons it is completely silent that communicates with your ECU via the CAN data circuit that operates in complete silence and doesn't even indicate that it's fitted. This means that a burglar cannot replace the ECU or install new key fobs to allow your car started.
If you have forgotten your PIN code Our engineers have provided an emergency reset device that lets you enter "service mode". This allows the technician or dealer to temporarily start and drive your car so that they can carry out maintenance work, MOTs or valet parking without entering the PIN code a second time. When the technician is finished or you have collected the vehicle, enter the PIN code to exit the service mode.
No radio signals
In contrast to other security systems the Ghost immobiliser doesn't use an alarm system or key fobs to stop vehicles from starting. Instead it communicates with the vehicle's ECU and CAN data circuits to prevent the engine from starting. It is a discreet solution that isn't affected by key-cloning techniques or RF scanning that thieves use to bypass security devices. It can also be paired with tracking systems to increase the overall safety of your vehicle. It will also alert you to any attempted theft or tampering.
The Autowatch Ghost is a TASSA-certified device that is insurance-approved and provides a superior level of protection against key hacking, the cloning process, and even theft. It makes use of a mobile application to control the device. It is secured to ensure security. It comes with a secure emergency PIN override. It is a discreet efficient and cost-effective way to protect your vehicle from theft.
ghost immobiliser reviews isn't without its problems. Users often have trouble entering the correct sequence to disarm. The device requires input from buttons already present on your vehicle such as buttons on the steering column or console. like this can be difficult for users to remember, or they could get it wrong the first time around. It is advisable to read the manual that comes with the device in order to comprehend this and practice the process of disarming prior to driving the vehicle.
Another issue is that certain vehicles have issues with the CAN data connection, which can affect the functionality of the Ghost. This could be due to malfunctioning sensors or an damaged OBD port. It is recommended to test the system again before using it in case the CAN connection has any issues.
Change your PIN code quickly
The Ghost is a fantastic device that has taken the market by storm however the process of changing pin codes can be a bit confusing. The device is preprogrammed by installer at the time of installation, but customers may want to change it due to a variety of reasons. For example, they might prefer a different button that disarms the device or do not want their installer to know. It is also possible that they dislike the pin code they have. It's simple to change your pin number. Follow the steps below to find out how.
Please note that you will need to turn on the vehicles ignition but DO NOT start the engine! It will take only just a few seconds to be completed. The vehicle will then resume normal operation.