Three Greatest Moments In Window Repair History

Window Repairs

Window repairs can help homeowners save money and make their homes comfortable. In the event of major damages such as broken glass or a damaged frame, a replacement window may be required.

However, many other issues can be addressed to extend the life of your windows. Common issues include:

Cracked or Broken Panes

Whether it's an errant rock that was tossed by your lawnmowers or a tree branch that has been blown by high winds, damaged windows are not just unattractive but can lead to more expensive electricity bills because the broken pieces let cold air into your home. It's fairly easy to fix windows that have broken panes.

Begin by carefully removing the glass with gloves and safety sunglasses. You may have to make use of a utility knife in order to remove any remaining putty or old glazing compound around the edges of the frame. Then, use a gentle cloth or paper towel to clean the glass's surface and wood of the frame.

Once the area is clean then apply a waterproof silicone caulking around the perimeter of the frame. This prevents water from entering through the crack, which could cause further damage to both the frame and the glass.

If you have double-pane glass, cracks that are not treated properly could weaken the gas layer that lies between the panes and make your windows less insulative. If the crack is so extensive that it threatens the integrity of the window, or if the inner pane is missing you might need to contact an expert.

Thermal stress cracks can also happen when there's a dramatic difference in temperature between the outside and inside of your home, causing the glass to expand or contract. If this happens across two windows it's recommended to replace the window rather than trying to repair it.

Clear tape can be used to seal cracks in windows that aren't yet ready to be replaced. It also keeps out bugs and cold wind. You can even cut a piece of nylon stocking or tarp sufficient to cover the crack, and stick it to the wall using duct tape. It's not a solution that will last forever however it's a great solution in a pinch and it keeps cold air and insects from entering your home. If you notice cracks appearing on the windows of your old ones, you should check with your local business to determine whether replacing the entire window is the best option.

Rotten Wood

Wood rot is a common issue with windows. It can alter the appearance of a home and also pose danger to your safety. It is possible to fix rotted wood. First, you must identify the cause of the wood's rot. This can be done by looking for leaks in the roof and gutters that aren't functioning cracking caulking, and any other areas that allow water to enter the wood.

The next step is to remove the rotten parts of the window frame. This can be accomplished with the claw hammer, chisel, or rasp. After removing the decayed wood, you'll have to replace it with fresh wood. Pre-treated wood is suggested for this project, as it will resist rot. If you are unable to replace the wood that has been damaged You can try using wood filler or hardener to help strengthen the damaged area. Many hardware stores will carry this type of product. Follow the directions on the label of the product to get the most efficient results.

After you have replaced the rotten areas of the windowsill, it's important to protect the repaired area. You can do this by applying an water-resistant wood sealant. Sikkens for instance is a fantastic product to use.

Use a two-part epoxy in order to protect the wood against further damage. This product is easy to apply and leaves a beautiful finish. However, window repairs is important that you adhere to the instructions for application on the label. When the epoxy filler is dry, you can sand down the surface of the wooden. Start with a rough sandpaper then move to an easier grade.

You don't want to expose the rotted part to more moisture. So, it's recommended to cover the repaired area with an oil-based primer that will help protect it from moisture. Then, you can reapply waterproof wood sealant.

It won't open

There are many reasons why windows don't open. Wood frames can warp when exposed to rainy weather, or the house may have settled or someone could have closed it for security reasons. However, with a bit of patience and the right tools, all windows that are locked can be opened.


Accumulated debris or gunk can be a major reason of a window not opening. Grime and dirt build up on the sliding tracks, hinges and locks over time, notes Acme Glass. Additionally, hardware made of metal is prone to rust when it comes into contact with humidity or direct sunlight. Spray grease on these areas will help to prevent oxidation and keep your windows functioning properly.

Stuck windows can be the result of an unintentional break or loosening of the pulleys that are used to raise and lower the window. These components may lose tension and cause obstruction, especially when the window is situated two or more stories above the ground.

If you have trouble opening a door, try using a pry-bar to gently push the window open. Put a piece of wood on the frame to give your pry bar more leverage, and be sure not to harm the window or the wood. Alternately, you can run a hair dryer along the edges of the frame for a few minutes to warm the wood and allow it move more easily.

A faulty spring can also be the cause of windows that don't lift or lower. Based on the manufacturer of the windows, you'll be required to refer to your owner's manual for further instructions.

If you've tried cleaning and lubricating the moving parts of your windows, but they aren't opening, it's probably time to replace the windows. Homespire Windows & Doors offers windows that are energy efficient. Don't let the windows in your home become functional to useless. A window that isn’t properly shut could make your home vulnerable to burglary and water damages. Contact us today to learn more about our replacement windows as well as our services!

Edit

Pub: 07 Feb 2024 05:48 UTC

Views: 27