Here's A Little-Known Fact About Car Ghost Immobiliser

Car Ghost Immobiliser

Ghost Immobiliser, an advanced system that prevents your vehicle from starting without a unique code input through buttons that are already in place. The device is invisible for thieves and runs quietly.

It can also help to deter newer methods like hotwiring and theft of relays. It could also lower your insurance premium.

No Radio Frequencies

A ghost immobiliser differs from a conventional one in that it does not transmit radio frequency, making it impossible for thieves to evade the device with a simple tool for cloning. This means that a ghost immobiliser won't keep your car from getting started even if a thief has successfully copied your key or stolen it.

Ghost immobilisers are also effective against relay attacks. They involve amplifying the signal from your key fob to fool the system into allowing your vehicle to start. The Ghost can detect this and will refuse to start your car, and will require you to enter the PIN code. This is a great method to deter thieves who are tech-savvy who are armed with affordable and easy-to-use tools to replicate your vehicle.

The Ghost can also be fitted in a discreet manner (without damaging your vehicle) and will only work after the correct pin sequence is entered. The Ghost will only be discovered by the person who set it up, meaning that nobody can use your vehicle until they know the pin sequence. Some systems allow the proprietor to create a valet or service mode, which permits the owner to let another person use their vehicle without having to disclose their pin code. This helps protect the vehicle from thefts that could be triggered by opportunistic means.

As well as being very user-friendly and simple to dearm and disarm, the Ghost can be linked up with a car tracker, making it possible to track your car. Some insurers offer discounts on car insurance for vehicles with Ghosts installed. This is an excellent benefit as it enhances the security of your vehicle.

Although the Ghost immobiliser is not Thatcham certified however, it is an aftermarket item that has been tested independently and proved to be effective. If you're thinking of buying a used car with the Ghost immobiliser, inquire with the seller if they are willing to transfer it to your new vehicle. This will make your new vehicle more secure than it would be in the case that the previous owner hadn't transferred it.

No Circuit Cuts

The absence of circuit breaks means that even when the vehicle is stolen, thieves will not be able to begin it. The thieves must know the exact buttons to unlock the vehicle, and they will not be able to accomplish this without knowing these sequences. This will deter them them from attempting to steal your vehicle.

If you have an GPS tracking device it, the Ghost can function as an anti theft device. It can send a signal that can trigger a siren to alert the tracker of an theft attempt. autowatch ghost 2 immobiliser can be activated at any time via your online dashboard.

When you connect your Ghost to the CAN data network, it will identify your vehicle and its owner using the unique pin code programmed during installation. This enables the device to communicate directly with the ECU of your vehicle and immobilise its engine. This means that only the vehicle owner or a person with the PIN code, is able to start the engine.

The pin code is difficult to be guessed by criminals since it is constructed by using buttons that can be easily accessed by the driver, like cruise control and stereo mute. Your engineer will give you the Pin Code Override Card that is like scratch-off tickets from lottery. It just needs to be scratched to reveal the code.

In contrast to traditional immobilisers, which are usually detected by a thief using diagnostics to read the immobiliser relay and the relay, your Ghost is undetectable by these methods because it doesn't employ circuit cuts or radio frequencies. It is therefore unaffected by the new techniques employed by organized gangs who are experts in the use of RF scanning technology as well as code-grabbing. It is a product that lasts for a lifetime that is easily removed from your vehicle if you decide to sell it. This means that you will not lose any of the security you've invested in.

No Key Fobs

With the rise of vehicle thefts in the UK It is imperative to take proactive measures required to protect precious vehicles from thieves who are opportunistic. The groundbreaking Ghost Immobiliser from Autowatch provides a strong defense against key cloning, hacking, and signal relay attacks. It is a discrete and highly effective car security system that is easy to install on a broad range of vehicles.

The Ghost immobiliser is not a typical system that relies on key fobs. It also does not utilize signals relays. It is not affected by signal interception, and it cannot be activated with stolen or compromised remotes. It's also tamper-proof, and has no external wiring, making it hard to take off.

It safeguards you from key-long hacking, key theft and key-long by stopping your engine from starting until a specific PIN is entered. This is accomplished by using existing buttons within the vehicle, such as the ones on the steering wheel or door panels, as well as the central consoles to create a customized disarm sequence up to 20 times (like entering a PIN in your smartphone).

This is the only way to start your engine and it will only work if you have entered the correct pin code. This makes it difficult for thieves who are opportunistic to steal your car. The system is designed to be easy to use. If you're worried about forgetting your pin code and want to know the pin code, request the installer to provide you with a driver's license that permits you to operate the car like you normally.

The absence of key fobs and LED indicators also means that the Ghost immobiliser cannot be identified by the diagnostic equipment or RF scanners that are commonly used by thieves to identify the presence of the system. This method of installation is more stealthy and enhances the security of the system, and permits it to be placed in a location that is difficult for thieves to access.

Ghost immobilisers are an affordable and effective in deterring thefts and increase the value of your vehicle. They are also recognised by some insurance companies and can result in lower premiums.

No Damage

If your vehicle is equipped with a ghost ignition system, you can rest your assurance that your vehicle is safe against hacking, cloning, key fob theft, and other typical methods of theft. This is particularly important if you've spent lots of money and time customizing your car or own an expensive or rare model. Ghost immobilisers are silent and require no additional components or installation.

The system lets you create an individual pin code that needs to be entered in order for the engine to begin. It works by using buttons on your steering wheel or console, or on the doors. The sequence can be altered by you at any time, meaning that even if a burglar knows your pin code, they cannot start your vehicle. It is also simple to turn off the device in an unservice valet mode so that your vehicle can be driven away for servicing, cleaning or for an MOT without being activated.

This means that even if your car is stolen or cloned the thief will not be able to start your vehicle and could be caught in the act. The system also alerts you to any tampering with your vehicle's wiring system for example, cutting or signal interference, and it can transmit this information to your phone, making it easy for you to ensure that the security of your vehicle is always in good order.

However, there could be a point at which you want to remove or disable the Ghost Immobiliser, perhaps to prevent maintenance or resale. In this case you'll need follow a careful process to remove the device without causing damage to the wiring system in your vehicle. Wearing protective gloves and flashlights is recommended during this procedure. It is also advisable to refer to any installation documentation or user manuals you may have to pinpoint the specific location of the device.

Once the immobiliser is removed from the wiring system, you can reconnect the car battery and test to ensure that it works as intended and that all electrical components are working according to their intended purpose. It is then time to insulate and join any wires that were cut using soldering or electrical tape where required. Check to see if any exposed wires are present, and that any dangling wires are secured using zip ties or other appropriate means. To ensure that your vehicle is not damaged through the removal process, schedule a professional vehicle checkup.

Edit Report
Pub: 07 Dec 2024 06:18 UTC
Views: 15