What Is Peugeot Keys And How To Use What Is Peugeot Keys And How To Use

Peugeot 208 Key Replacement

Peugeot 208 key replacement is best left to experienced auto locksmiths who have the appropriate tools and know-how. They can create and program keys faster and less expensive than dealers.

A dead coin battery is the most likely cause the reason why your key fob isn't locking or unlocking the doors. There are also other reasons that the key might be malfunctioning.

Dead Coin Battery

A dead battery can stop your Peugeot 208 from locking and unlocking, as well as stopping it from starting the engine. In this situation you'll need make use of the alternative method for starting that is described in the owner's manual.

The spark plugs could also be worn out. The spark plugs are responsible for instigating the fuel that starts the engine. However they have a finite time of life. They'll eventually fail if they're not used enough.

Luckily, there is an easy solution to this problem. The best way to solve this issue is to measure the voltage of your car battery using a multimeter. If the voltage is less than 11,5 volts, it's the time to replace it. If the battery is damaged, it is important to clean its contacts. You can do this by lifting the rubber covers that cover both battery terminals and using wire brushes to clean any parts that are corroded from the battery. You should then reconnect your cables to connect the positive and negative poles.

Water Damage

If your 208 isn't starting and the battery is not flat, then you need to make sure whether the spark plugs are functioning. It is possible that they're overly dirty, causing them to not to spark. This can be easily corrected by cleaning the spark plugs in the workshop.


Peugeot automobiles use a key with a transponder that is compatible with the immobiliser. This ensures that only the correct key is able to turn the engine. If the chip inside the Peugeot key is damaged, then it won't send the correct signal to the vehicle.

Water damage is a typical cause of this issue. This is a frequent issue in areas with colder temperatures where the vehicle is exposed to rain or snow. In this situation, contact a reputable locksmith who will have the tools and equipment needed to change the key's programming. They will also have all the latest technology and equipment needed to make the Peugeot smart key. The process shouldn't be more than 15 minutes.

Contacts to the battery are not working properly.

Peugeot replaced the transponder chips using a new version that makes use of electronic components that are mounted on a circuitboard. This new system works well when it's brand new however, over time, the circuit boards begin to lose their effectiveness and cease working correctly.

This can prevent the immobiliser chip from activating, so your car won't start. Contact a Peugeot specialist, or a locksmith, if this is the situation.

Another common issue is when the battery for the key fob starts to die, this causes the blade of the key to stop feeding into the lock. A locksmith for cars can replace the battery and cut a fresh blade for you, this is typically a quick fix.

Faulty Receiver Module

If your Peugeot key fob was not working after dropping it on the floor, getting exposed to a sudden rain or accidentally washing it may be due a malfunctioning receiver module. The receiver module is responsible for transmitting radio frequency to the onboard computer which controls the central locking system of your Peugeot vehicle.

The key fob itself has rubber seals that prevent water from getting to the chip inside. However, prolonged exposure to water could break through these seals, causing damage to the chip. Submerging the key fob into ocean water at the beach or throwing it into the water can be particularly damaging due to the high salt content.

If your Peugeot spare key fob doesn't work then you'll have to get the module replaced. This can only be done by an expert auto locksmith or Peugeot specialist. Peugeot keys unlike other automobiles, are protected by an immobilizer system. www.g28carkeys.co.uk requires the proper programming to allow the car to start. This is why you should only trust an experienced Peugeot locksmith to take on the job of creating and programming the replacement.

Computers with faulty on-board computers

The computer on board in your Peugeot is the one responsible for all of the systems within your car, ranging from airbags to power windows. If something is wrong with these systems, it'll typically display a code that identifies the problem. This code will be stored in the system until the problem is resolved. This can often mean that the on-board computers to be replaced.

The most frequent cause for the warning light for airbags to come on is corroded or loose connections within the sensor. This could be due to wear and tear, aging, exposure to salt and moisture. This issue should be taken care of as soon as you can, since an airbag that's malfunctioning could pose danger in the event of an accident.

If your Peugeot is showing a card that is not being detected error, then the key battery inside the key fob may be weak or dead. This will stop the key fob from sending a signal to disarm your vehicle's immobilizer. You can test this by pressing the unlock button on the key fob and then attempting to start your car. If this fails then the battery in the key fob must be replaced.

Edit Report
Pub: 29 Jun 2024 09:02 UTC
Views: 10