Maximizing Visibility with Open-Grid Scissor Security Gates

If you sell anything with a price tag, you live on two clocks. There’s the open sign, when you want a wide-open welcome and clear lines of sight. Then there’s the locked door, when you need real deterrence and a physical barrier that makes would-be thieves pick another target. The tension between those two clocks is where open-grid scissor security gates earn their keep. They protect what matters after hours without turning your storefront into a bunker by day. They also solve a sneaky operational challenge: keep visibility, airflow, and access for cleaning and deliveries while still controlling risk.

I have spent years helping retailers, property managers, and facilities teams choose and install expanding security gates in environments that range from boutique shops to warehouse mezzanines. The pattern is consistent. When a gate is invisible during business hours, fast to deploy at closing, and clearly formidable when locked, staff use it correctly and your risk goes down. When a gate is clumsy or blocks views, it gets left open or removed after a frustrating quarter. The open-grid scissor profile, also called accordion security gates, hits the sweet spot for most use cases.

What “open-grid” actually means and why it works

The open-grid on a scissor gate refers to the diamond or lattice pattern created by interlaced steel bars that slide on pivot points. You get a barrier with high percent open area, often 60 to 80 percent, depending on bar spacing and angle. That matters for three reasons. First, visibility. Staff doing a final walkthrough can see right through to the street, and passersby can see that your display is intact. Places under surveillance remain visible to cameras, which helps with both deterrence and evidence quality. Second, airflow. Many businesses rely on passive ventilation after hours. An open-grid design allows air to flow so you avoid stale smells and moisture build-up around doors and coolers. Third, compliance. In many jurisdictions, egress cannot be compromised. Properly specified commercial security gates fold back fully, leave the exit width intact during business hours, and can be keyed to allow emergency egress unlock under certain conditions.

Good gates are not just bars on wheels. The metal matters. Look for cold-rolled, riveted steel with tamper-resistant fasteners and a corrosion-resistant finish. Powder coating costs a little more than basic paint but pays back in chip resistance and longevity, especially in coastal climates or near kitchen exhaust. Cheaper gates use thin channels that twist over time, causing the gate to bind. The reliable ones feel heavy in the hand, yet they glide, because the wheels are right and the guides are aligned. In other words, quality is visible in the geometry.

The visibility dividend: security you can see through

Security gates for business live in the gray area between letting customers browse and keeping bad actors at bay. If you’ve ever worked the closing shift, you know the ritual. The last customer leaves, lights go to night mode, trash goes out, and you need to secure the frontage without hiding. A high-visibility gate helps your staff stay safe because they can scan outside before unlocking, and they can lock up without stepping into a blind alley of solid metal.

Retailers like the open-grid style because it preserves sightlines to display windows after hours. Your storefront keeps working as advertising, even when locked, which is the kind of compound ROI that CFOs appreciate. Jewelers and pharmacy managers https://fedupsecuritysolutions.ca/contact-us/ tell me the same thing in different words. They want to show less at night, but not nothing. With accordion security gates, you can pull merchandise away from the glass and still let your lighting do some work.

There’s also a pragmatic insurance angle. Insurers look at risk holistically. Visible barriers, especially those with documented delay times against forced entry, can reduce premiums or at least keep them from spiking after a claim. An open-grid scissor configuration sends a clear message. A smash-and-grab crew will not bulldoze through without noise and time. The quiet routes, pry and lift, are harder because the gate’s bottom track and lock dog into fixed points.

Where scissor gates fit best

Commercial security gates come in several appetites. You’ll see side-folding, rolling curtains, and rigid panels. Scissor gates excel in a few habitats.

Street-level retail with glass frontage. When the budget needs to stay sane and the glass needs to remain visible, scissor gates are the workhorse. They can be top-hung to avoid tripping hazards or floor-tracked for extra rigidity. A clothing store might use a double-wide, center-meeting pair that locks at the middle, letting them open one leaf for deliveries.

Warehouse and industrial interiors. Safety cages around inventory, forklift openings that need quick control, and mezzanine edges where you want a movable fall barrier, all benefit from expanding security gates. The air keeps moving across the space and visibility for supervisors remains. A distribution center I worked with in the Okanagan installed scissor gates at the mouth of high-value pick aisles. Shrink dropped by roughly 20 percent in the first quarter, not because the gates were Fort Knox, but because casual access turned into controlled access.

Schools and community facilities. Auditorium lobbies and corridors often need to be open during events and secure after, without building full-height walls. The open-grid gate slides into a pocket by day and rolls shut in seconds for after-hours zoning. Staff can monitor students or visitors across a space without a solid barrier blocking sightlines.

Service bays and back-of-house. Restaurants, auto shops, and grocers use accordion security gates to separate customer areas from staff-only zones while still passing carts and pallets through quickly. The gate becomes a polite line that says “not beyond this point,” and when you want to move equipment, you simply fold it away.

Top-hung versus floor-tracked, and why your doorway cares

One of the first decisions is whether the gate should hang from an overhead track or ride on a bottom track. Both have their place.

Top-hung is the cleaner look. You protect your floor from trip edges and mop buckets, and you avoid winter slush clogging a floor channel. It is the go-to choice in showrooms and offices. The load transfers to your header, so you need enough structure above the opening. In older buildings, I have opened soffits only to find nothing but air behind the drywall. Don’t guess. If the header can’t take the load, a surface-mounted steel angle can bridge the span, though it adds visual weight.

Floor-tracked brings rigidity. If you expect pulling and pushing on the gate, or if the opening is extra wide, the bottom guide keeps the lattice from flexing. It also reduces racking when someone tries to twist the frame to pop the lock. The trade-off is housekeeping. Floor tracks need occasional vacuuming. In snowy climates, a rubber ramp or removable track cover can keep slush from freezing inside the channel overnight.

Pro tip: in storefronts with uneven floors, a top-hung gate will move smoothly while a floor-tracked gate might shimmy and bind. On the other hand, if your ceiling is a delicate grid with sprinklers and you can’t touch it, the floor track solves the problem. A good security gate supplier will check plumb and level before taking measurements, and that measurement visit is not a formality. It is where you catch the edge cases that can make a nice gate into a daily annoyance.

Locking hardware, the quiet backbone of deterrence

Locks get less attention than steel, which is odd because criminals attack the weak link. Consider how the gate locks into the building. A center-drop pin and recessed floor cup is faster and stronger than relying on a surface hasp alone. On double gates, a center-meeting lockset with a shield makes it harder to access with bolt cutters. Tamper-resistant rivets on the shield matter. Hinges should be pinned or peened to prevent pop-and-lift attacks.

The cylinder should match your keying standards. If your business uses restricted keyways, have the gate rekeyed to match. I have watched large retailers carry three separate keys for one storefront and, eventually, staff leave gates open to avoid key chaos. Simplify. If you use electronic access control, add a surface-mounted electric strike with fail-secure behavior during outages, and verify that fire code for your occupancy allows it. The aim is not gadgetry, it is compliance and muscle memory. Staff should be able to lock the gate with one practiced motion, even at 10:57 p.m. when they are thinking about catching the last bus.

Strength without opacity: the sweet spot of bar spacing

Every gate lives on a spectrum. Tight spacing raises delay time against hand tools but drops visibility and airflow. Wide spacing improves sightlines but creates handholds. In most retail scenarios, a 3 to 4 inch clear spacing between verticals and a similar diagonal spacing across the lattice balances those needs. Pharmacies, jewelers, and cannabis retailers, especially those in jurisdictions with strict display rules, often choose tighter patterns in the first bay near the lock and slightly wider beyond to balance looks with strength.

If you mount the gate inside the glass, bar spacing interacts with your glazing thickness. Laminated glass buys you time, and the gate behind the glass adds more. If you mount outside, you are declaring the barrier early, which is good, but you also must consider rust, graffiti, and municipal aesthetics. Some cities require inside mounts for heritage streetscapes. Don’t fight city hall with a drill. Check bylaws first.

Real-world performance and what the numbers hide

Manufacturers sometimes cite “resistance classes” or test results from pry tests. Those are useful, but field conditions are messy. A gate that delays a novice for three minutes in a lab might fall in thirty seconds to an experienced person with a specific wedge. Conversely, a well-installed gate with modest steel can outperform a beefier gate that was mounted with poor anchors. The installation is half the battle. Use proper wedge anchors into solid substrate. Avoid tapcons into questionable brick. If the building’s masonry is crumbly, consider a continuous steel channel anchored across a wider area. Spreading load beats trying to add length to a short anchor.

I have watched an expanding security gate Kelowna job survive a crowbar attack after hours. The cameras showed the intruder give up after wrestling the meeting point for about a minute. The reason was not exotic metallurgy. The bottom cup was set flush, the drop pin seated fully, the meeting lock shielded, and the top trolley stayed true so the lattice did not rack. That is the formula. Solid geometry, clean travel, anchored ends.

The human factor: gates people actually use

A gate that is annoying at 8 a.m. will be forgotten at 8 p.m. Staff will prop it, tape over the latch, or slide it halfway and leave. When I audit storefronts, I look for scratches on the floor from dragging and for tape flags on keys. That tells me the gate is fighting its users. The fix is not always a new gate. Sometimes it is a small shim to level the track or a wheel swap to a softer durometer.

Training matters. Most incidents happen when someone rushes closing. Write a short sequence staff can memorize. Lights to night mode, cash to safe, walk the floor, gate closed, lock engaged, second person verifies, exterior sweep, leave together. Two people at close is a simple policy that changes outcomes. The best hardware in the world will not beat a tired staff member trying to leave alone with their hands full.

Retail aesthetics and the case for color

Commercial security gates do not have to look like prison gear. Powder coat color can echo your brand or the trim around your glass. Black is classic because it disappears at night. White highlights dust and fingerprints. Silver looks modern but can feel cold against warm wood storefronts. In food and fitness settings, a light gray hides scuffs and blends with concrete. The finish is more than mood. A proper powder coat in the 60 to 80 micron range gives enough film build to resist dings. Ask the supplier to show a cutaway of the coating. If you see bare steel at the edges or orange peel so heavy you can skate on it, walk away.

Some retailers fit security gates inside wooden millwork pockets. When closed, you see the lattice. When open, the gate vanishes. This is the rare case where a slightly pricier custom install pays off daily, because staff do not have to work around a bulky stack near the hinge. A well-designed pocket reduces stack depth and preserves display space.

Choosing a security gate supplier with the right instincts

The market is crowded. Some suppliers import light-duty gates and sell on price. Others build locally and emphasize thickness over everything. Neither extreme serves you if the gate does not fit your site and your workflow. Look for a security gate supplier that asks operational questions. Who opens and closes? What is your emergency egress path? Are there cameras that need an unobstructed view through the gate? Will janitorial carts or deliveries pass through after hours? What is the substrate at the mount points?

References beat brochures. Ask for sites you can visit. Open and close the gate yourself. Listen for scrape and click. A dry click at the lock is good. Metal on concrete is not. Ask the installer what they do when they hit out-of-plumb conditions. If they say “we make it work,” press for specifics. Proper shims and brackets are not a dirty secret. They are the difference between a ten-year gate and a one-year headache.

Where scissor gates stand against alternatives

Roll-down shutters are strong and fast, but they turn a window into a metal wall at night, which kills visibility and can get you pushback from your BIA or city planning department. Side-folding panel systems look sleek in malls and airports, but they carry a higher price tag and need clean, straight pockets to stack. Fixed bars across glass are cheap and blunt. They also trigger a visceral response from customers and can violate egress rules. Scissor security gates sit in the middle. They are the reliable sedan in a parking lot of sports cars and dump trucks. They travel well, cost less than high-end architectural systems, and do not announce fear.

If your business handles high-risk merchandise, you can layer defenses. Keep laminated or tempered glazing, interior scissor gates behind the glass, and targeted cages for the highest value inventory. Layering increases delay time and forces an intruder to switch tools and tactics. That increases noise and duration, which increases the chance someone calls the police.

Installation notes from sites that fought back

Most storefronts are rectangles drawn by someone who never met your specific space. There are columns that nibble into the opening, or a slope at one end to meet sidewalk grade. We once installed accordion security gates for a corner cafe with a 1.5 inch fall across a 12 foot span. A level track would have left a gap at one end. The solution was a tailored threshold shim that feathered into the slope, plus brushed seals to bridge the minimal gap while keeping the gate aligned. Off-the-shelf hardware would have whistled in the wind and rattled on every bus that passed.

Another site had radiant heat pipes behind the drywall at the header. The fix was a top-hung track mounted to a steel angle bracket that tied into the side walls, bypassing the hot zone entirely. Engineering a mount may sound dramatic for a gate, but the effort pays off in daily silence and smooth travel.

Maintenance that actually sticks

Gates age like everything else. Rollers flatten, pins loosen, finishes collect the city’s best dust. A minimal maintenance plan keeps the open-grid magic alive without adding work.

Quarterly: vacuum tracks, wipe lattice with a damp cloth, and check for loose fasteners. A half hour keeps friction from becoming force. Annually: lubricate pivot points with a dry PTFE spray, check locks for play, and re-tension any sag with the manufacturer’s specified adjustment.

That’s it. Skip the greasy sprays that invite dust. A dry film lube keeps things sliding without building grime. If you are near the coast or a winter salt zone, rinse the bottom six inches more often. Corrosion starts at the floor.

The Kelowna note: climate and code quirks

Businesses in the Okanagan and similar climates bump into two realities. First, winter brings freeze-thaw cycles that punish floor tracks. If you are set on a floor-tracked product, budget for a removable track cover or a beveled ramp that sheds slush. Second, regional building codes treat secondary egress paths with specificity. If your gate crosses an exit route, you need hardware that allows egress or you need to rethink locations. I have seen local inspectors in Kelowna accept break-away keyed locks only if signage is clear and the route is genuinely secondary. Do not assume. Invite your inspector to the planning stage. They are less fussy when they feel included, and you avoid costly rework.

Many expanding security gates Kelowna projects also involve mixed uses: retail at grade, residential above. That means extra sensitivity to aesthetics and noise. Choose ball-bearing trolleys, not simple bushings. Your upstairs neighbors hear everything at 11 p.m., and a gate that whispers keeps peace.

Budget, lead times, and what to measure

Pricing varies with width, height, finish, and hardware. For typical storefront widths between 8 and 16 feet, a solid commercial-grade scissor gate often falls in the low four figures, installed. Custom colors, pockets, and electric strikes add to that. Lead times are usually two to six weeks for standard sizes, longer for customs or during peak renovation season.

Measure twice. You want clear opening width, height to the header structure, any obstructions like sprinklers or signage, and substrate type at both sides and the floor. If you have a sloped sill, note the high and low points. Photographs with a tape measure in frame speed up quoting. Good suppliers will still measure themselves before fabrication, but your initial data reduces surprises.

A quick decision guide for busy managers

When time is tight and you need an answer by Friday, focus on a handful of calls that determine fit and performance.

Mounting: top-hung for clean floors, floor-tracked for extra rigidity or when ceilings are off-limits. Visibility versus strength: standard open-grid pattern for general retail, tighter grids or layered systems for high-risk goods. Locking: center-meeting with shield and floor cup, keyed to your existing system, with thought given to egress rules. Supplier: local references, site measure included, clear plan for uneven openings and substrate. Maintenance: simple quarterly checks, dry lube, and a plan for winter conditions if applicable.

The payoff: security that doesn’t cost you daytime business

The best commercial security gates vanish into the routine of your space. They open smoothly in the morning, lock with a decisive motion at night, and all day they wait quietly in their pocket. They protect without blocking sales from the sidewalk. They preserve airflow and camera sightlines. Staff trust them, use them, and stop improvising with chairs, racks, and a prayer.

If you need heavy steel shutters, you probably already know it. If you do not, then scissor security gates with an open-grid design give you a balanced, affordable, and proven way to lower risk while keeping your storefront alive to the street. Pick the right mounting, insist on good hardware, work with a supplier who measures and thinks, and you will have a barrier that lasts years and pays for itself the first time someone jiggles the lock and chooses the next door down.

For businesses that trade in trust as much as goods, visibility is not a luxury. It is the fabric of your brand. Open-grid gates let you keep that fabric intact, even when the lights dim and the last receipt prints.

Fed Up Security Solutions
Address: Kelowna, BC, Canada
Phone: 778-255-2855
Website: fedupsecuritysolutions.ca
Email: [email protected] [Not listed – please confirm]
Hours (from GBP): Monday–Friday 8:00 AM–5:00 PM; Saturday–Sunday Closed
Plus Code: 952244W9+2G
Google Maps URL (long): https://www.google.com/maps/place/Fed+Up+Security+Solutions/@50.145032,-119.8811695,15z/data=!4m6!3m5!1s0x20b980417d7168f7:0x38d5dba91a2e3899!8m2!3d50.145032!4d-119.8811695!16s%2Fg%2F11vm41r01r
Google Maps Embed:

Socials:
https://www.facebook.com/profile.php?id=61553004552449
https://www.youtube.com/@FedUpSecuritySolutions
Logo URL: https://fedupsecuritysolutions.ca/wp-content/uploads/2023/11/FEDUP_logo.png
Image URL: https://fedupsecuritysolutions.ca/wp-content/uploads/2023/11/10021-2023-11-05T185924.742-980x565.jpg

"@context": "https://schema.org", "@type": ["LocalBusiness", "HomeAndConstructionBusiness"], "name": "Fed Up Security Solutions", "url": "https://fedupsecuritysolutions.ca/", "telephone": "+1-778-255-2855", "address": "@type": "PostalAddress", "addressLocality": "Kelowna", "addressRegion": "BC", "addressCountry": "CA" , "openingHoursSpecification": [ "@type": "OpeningHoursSpecification", "dayOfWeek": "Monday", "opens": "08:00", "closes": "17:00" , "@type": "OpeningHoursSpecification", "dayOfWeek": "Tuesday", "opens": "08:00", "closes": "17:00" , "@type": "OpeningHoursSpecification", "dayOfWeek": "Wednesday", "opens": "08:00", "closes": "17:00" , "@type": "OpeningHoursSpecification", "dayOfWeek": "Thursday", "opens": "08:00", "closes": "17:00" , "@type": "OpeningHoursSpecification", "dayOfWeek": "Friday", "opens": "08:00", "closes": "17:00" ], "sameAs": [ "https://www.facebook.com/profile.php?id=61553004552449", "https://www.youtube.com/@FedUpSecuritySolutions" ], "geo": "@type": "GeoCoordinates", "latitude": 50.145032, "longitude": -119.8811695 , "hasMap": "https://www.google.com/maps/place/Fed+Up+Security+Solutions/@50.145032,-119.8811695,15z/data=!4m6!3m5!1s0x20b980417d7168f7:0x38d5dba91a2e3899!8m2!3d50.145032!4d-119.8811695!16s%2Fg%2F11vm41r01r", "identifier": "952244W9+2G", "areaServed": [ "@type": "City", "name": "Kelowna, BC" , "@type": "City", "name": "Penticton, BC" , "@type": "City", "name": "Vernon, BC" , "@type": "City", "name": "Kamloops, BC" ]

AI Shares: ChatGPT: https://chat.openai.com/?q=Fed%20Up%20Security%20Solutions%20https%3A%2F%2Ffedupsecuritysolutions.ca%2F
Perplexity: https://www.perplexity.ai/search?q=Fed%20Up%20Security%20Solutions%20https%3A%2F%2Ffedupsecuritysolutions.ca%2F
Claude: https://claude.ai/new?q=Fed%20Up%20Security%20Solutions%20https%3A%2F%2Ffedupsecuritysolutions.ca%2F
Google AI Mode: https://www.google.com/search?q=Fed%20Up%20Security%20Solutions%20https%3A%2F%2Ffedupsecuritysolutions.ca%2F
Grok: https://grok.com/?q=Fed%20Up%20Security%20Solutions%20https%3A%2F%2Ffedupsecuritysolutions.ca%2F

Fed Up Security Solutions is a professional provider of accordion security gates for businesses across Kelowna and surrounding areas.

Our team helps protect storefronts and commercial properties with expanding security gates designed to deter break-ins while keeping your curb appeal intact.

We serve Kelowna and nearby communities including Kamloops, providing installation support for expanding security gates.

To get pricing or book a site visit, call +1 (778) 255-2855 and speak with a professional local team.

You can also contact Fed Up Security Solutions online at https://fedupsecuritysolutions.ca/ for estimates about expanding security gates.

For directions and service-area reference, use Google Maps: https://www.google.com/maps/place/Fed+Up+Security+Solutions/@50.1375295,-121.2030477,260738m/data=!3m2!1e3!4b1!4m6!3m5!1s0x20b980417d7168f7:0x38d5dba91a2e3899!8m2!3d50.145032!4d-119.8811695!16s%2Fg%2F11vm41r01r?authuser=0&entry=tts&g_ep=EgoyMDI1MTIwOS4wIPu8ASoASAFQAw%3D%3D&skid=72338b4b-cc19-4cc8-a233-0fd02067c8ae

If you need a trusted supplier for expanding security gates in Kelowna, BC, Fed Up Security Solutions can help you secure your property quickly.

What are expanding scissor security gates?

Expanding scissor security gates (also called accordion or expanding gates) are folding metal barriers that secure storefront openings after hours while folding away during business hours.

Do expanding security gates help deter break-ins?

Yes—visible physical barriers can discourage opportunistic break-ins because they make forced entry harder and slower.

Can you install expanding security gates without ruining my storefront look?

Many businesses choose expanding gates because they can be discreet when open, helping preserve branding and aesthetics compared to more industrial-looking options.

Do you serve areas outside Kelowna?

Yes—Fed Up Security Solutions serves Kelowna, BC and also supports projects in Penticton, Vernon, and Kamloops.

How do I get a quote for expanding security gates?

Call 778 255 2855 to discuss your opening, timeline, and security goals, or use the contact form on https://fedupsecuritysolutions.ca/.

What are your business hours?

Monday to Friday, 8:00 AM to 5:00 PM (closed Saturdays and Sundays).

Do you offer roll shutters too?

Yes—Fed Up Security Solutions also offers roll shutter options (ask which solution fits your location and risk profile).

How can I contact you right now?

Call: 7782552855
Website: https://fedupsecuritysolutions.ca/
Facebook: https://www.facebook.com/p/Fed-Up-Security-Solutions-61553004552449/
YouTube: https://www.youtube.com/channel/UCnV8GaVrI2bagMrZJosyqmw

Landmarks Near Kelowna, BC

Okanagan Lake — https://www.google.com/maps/search/?api=1&query=Okanagan%20Lake%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Knox Mountain Park — https://www.google.com/maps/search/?api=1&query=Knox%20Mountain%20Park%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Waterfront Park (Kelowna) — https://www.google.com/maps/search/?api=1&query=Waterfront%20Park%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

City Park (Kelowna) — https://www.google.com/maps/search/?api=1&query=City%20Park%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Myra Canyon Trestles — https://www.google.com/maps/search/?api=1&query=Myra%20Canyon%20Trestles%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Mission Hill Family Estate Winery — https://www.google.com/maps/search/?api=1&query=Mission%20Hill%20Family%20Estate%20West%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Orchard Park Shopping Centre — https://www.google.com/maps/search/?api=1&query=Orchard%20Park%20Shopping%20Centre%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Kelowna Downtown (Bernard Ave) — https://www.google.com/maps/search/?api=1&query=Bernard%20Avenue%20Downtown%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Big White Ski Resort — https://www.google.com/maps/search/?api=1&query=Big%20White%20Ski%20Resort%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

BC Orchard Industry Museum (Kelowna) — https://www.google.com/maps/search/?api=1&query=BC%20Orchard%20Industry%20Museum%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Penticton Peach — https://www.google.com/maps/search/?api=1&query=Penticton%20Peach%20Penticton%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Okanagan Rail Trail — https://www.google.com/maps/search/?api=1&query=Okanagan%20Rail%20Trail%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Edit

Pub: 20 Jan 2026 22:04 UTC

Views: 2