Don't Believe In These "Trends" About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to decay or rust as aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and even be fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good condition.

For single pane windows, it can be relatively simple to replace windows, and the new one will generally fit within the frame that was previously installed easily. If windows with double panes are joined by internal beading, it is harder to remove and replace the old panes. In this instance it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric and not onto the floor which could cause them to be trampled.

Once the glass has been removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional comes out and fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap is large, you might think about the security door with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from becoming worse.

Repositioning the hinges can aid in fixing a window which is sliding. To do this, you'll need open the window so that you can get to the frame. With a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close your window and test it for fit. If you're happy with the fit, you can tighten the screws until they remain in position.

If you aren't able to move the hinges you may require replacing the seal. window repair can dry out and lose their elasticity with time, causing them to loosen. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows are watertight and safe from drafts.

UPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it can be caused by the handle mechanism wears out. It's fairly simple to repair a loose uPVC handle. First, you'll need close your window and do an initial test fit. The corner joints of the sash should be aligned with the casing joint. If it doesn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is important to take action if get up each morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the issue the old caulking might need to be removed before a new layer of caulk can be put on. When it comes to uPVC repair, you should avoid over-caulking. This can make your window harder to clean and lower its energy efficiency.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more extreme situations, you may have to replace the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to keep in mind that if the leakage originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or it opens in an ease. These are easily repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. It is essentially a simple procedure, but it is easier to do with someone else to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. You can do this by looking for the arrows on each hinge. This shows which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window a certain way or by improper installation in the factory. Sending us photos through our website can often solve the issue. We are more than happy to give advice.

It is also essential to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It can also reduce the possibility of a window sticking and prevent corrosion. The ideal time to perform this every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges can also become disaligned as a result of wear, creating a gap where the sash and frame meet. If they are damaged beyond repair, it might be necessary to get them re-aligned. The interlock, which is on the hinge side of the window, can also be misaligned, and again it may be possible to give them a good clean, but in certain cases, it may be necessary to have them replaced.

These seals can wear down or become damaged over time, allowing air escape. Installing high-quality weatherstripping will help to stop draughts. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures and lessen the risk of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. They can keep your home warm by blocking out cold air.

Your windows made of upvc will remain a great source of insulation and security to your home with a little regular maintenance and repairs. However, it is important to realize that all windows have a lifespan and there may come an point at which it is more cost-effective to replace them rather than fix them. If you are experiencing issues with your upvc window, it's best to consult a professional as soon as possible.

Edit

Pub: 05 Feb 2024 17:04 UTC

Views: 15