10 Misconceptions Your Boss Has Regarding Fiat 500 Replacement Key Cost

Fiat 500 Replacement Key Fob

If your remote key fob isn't working, it's time to replace the battery. However, if you replace the battery but it does not work it could be elsewhere.

At United Locksmith, we specialize in making new keys for classic automobiles. We have all of the tools and parts necessary for this type of service.

Dead Coin Battery

The most frequent reason that your Fiat 500 key fob will not lock or unlock the doors is a dead battery. The key fob has a coin cell battery that will drain quickly when it isn't being frequented enough. If your remote has started to show signs of loss in range or stopped working in the middle of the night, then your battery may be dead.

Metal clips hold the battery in within the key fob. If the clips are loose, it can cause contact issues that will stop your remote from receiving power. Using a small flathead screwdriver, pry the retaining clip outwards to take out the battery and replace it with a new one. Make sure that the battery you choose to use has the same voltage, size and specification as the original.

The key fob may also become corroded or damaged through exposure to water. Even a quick shower in soapy water can harm the electronic chip in. It is best to keep your key fob in a dry location.

Water Damage

If your key fob isn't working correctly, it could be caused by water damage. Key fobs are fitted with rubber seals that protect them from being damaged by a light rain or splashes of water, but it is vital to keep your car keys away from the pool, ocean, and the washing machine!

The key fob contains an electronic chip inside it that transmits a signal car's immobilizer system. The chip allows the 500 to be locked and started. If it gets wet, however it will not function.

If you're looking to determine whether your key fob functional it is possible to clean the internal electronics with isopropyl or an electronic cleaner. However, it's best to get a replacement from a dealer rather than trying to fix a key fob that has been submerged by salt water.

While a replacement fob can cost you a bit of money, it's much cheaper than paying for your Fiat 500 to be towed to the dealer and repaired! You could also do it yourself with some simple steps. Be sure to have the correct battery type before you attempt to open your keyfob. You can find step-bystep instructions for any car keyfob online.

fiat panda key that is contained in the key fob communicates to your car's immobiliser unit to ensure the vehicle is only able to start when the correct key is inserted. If the chip is damaged, or damaged in any way your car will not start.

Water damage or a dead cell battery are the two most common reasons for the chip being damaged. It is best to hand over the repair to a professional locksmith, who will be able to replace the chip quickly and at an affordable cost.

If your key fob does not work after exposure to clean water from a tap or rain take it off the battery. Clean the electronic component using a towel. If the key fob does not work it's likely to be an issue with the chip and is required to be replaced.

A few people will visit their dealer when they require an entirely new Fiat fob. However, this can be expensive. If you are seeking a cost-effective solution to have your Fiat key fob repaired, look no further than United Locksmith. We have the tools and expertise to fix your Fiat fob in a timely and professional way.

Faulty Receiver Module

Fiat key fobs transmit a signal to the vehicle which will unlock and lock doors (and start the car for those with an automatic transmission) up to 50 feet. However, there are some things that could cause the fob to stop working. This could be due to a dead battery water damage, worn out buttons an issue with the receiver, signal interference, or a malfunctioning chip.

If the fob is in the pocket that has been subject to extreme trauma (such as being dropped on the hard floor or washed in the washing machine) it might not be in a position to communicate with the Body Control Module (BCM) of the car. This is because the BCM is secured and will only accept a signal from a genuine original key and not another.

If this is the case, you will require replacing your fob. A professional locksmith will handle the entire process of replacing your key including programming a new key to your 500. They can even give you an clone fob that performs the same as the original (and costs just a fraction of the price).

Edit
Pub: 26 Apr 2024 04:38 UTC
Views: 39