An Ghost Immobiliser Fitting Success Story You'll Never Remember

Ghost Immobiliser Fitting

Secure your vehicle from theft of keys, cloning and hacking with the world's first aftermarket CAN immobiliser. With the option of connecting to a Ghost app and GPS tracking system that will notify you via phone if your car is tampered with or stolen.

Installing a Ghost immobiliser is a breeze for the skilled technician. Making use of the correct tools, insulation tape and heat shrink tubing is crucial.

Getting Started

Ghost immobilisers can be a great alternative to physical theft devices such as wheel locks and car alarms. autowatch ghost immobiliser cost safeguard your vehicle without using LED indicators or key fobs. They connect directly to the ECU CAN data network and are activated only by entering a PIN code. This gives a more secure level of security against key hacking, cloning, and even ECU swapping.

Therefore, the installation of a ghost immobiliser Birmingham has to be done with a high degree of agility and accuracy. It can be a bit like tiptoeing through the minefield. A single mistake could cause severe damage to the circuits of the electrical system of your vehicle. To avoid this, it's vital to be aware of the process of installation and prepare your vehicle for the installation process.

First, you must prepare the vehicle by removing interior panels to make space for the immobiliser device. Once you've found the ideal location to hide it, secure it in place with cable ties to keep it from being removed or damaged. Then, tidy up your wiring by making sure that loose wires are tied down and using insulation tape to cover the exposed connections. This will reduce the chance of accidental short circuits while also improving the aesthetics and decreasing the chance of tampering from thieves.

Find a source of constant 12V power and a grounding for the ghost immobiliser. Once you've identified these connections, test the power cables with a multimeter to make sure they are delivering a consistent voltage. Connect the CAN H and the CAN L wires of your immobiliser with the grounding and power points.

It is essential to ensure that all connections are checked and inspect the immobiliser to check for indications of corrosion. The process of entering a PIN and launching the car is a good way to test the system. This should be an integral part of your routine since it can help you identify any issues that may be occurring early on. Regular testing also helps to prolong the life of the device, and ensure that it is operating at peak performance.

Preparing the vehicle

Installing a Ghost immobiliser requires skills and knowledge. A wiring diagram is essential to identify the right wires, establishing precise connections, and ensuring safety. A multimeter can be used to verify electrical values and ensure security. Cable tie and insulation tape can be used to secure the connections and shield them from tampering. Additionally, a user's manual will provide specific guidance tailored to your Ghost Immobiliser model.

Once installed the ghost immobiliser can prevent unauthorised engine starts by requiring the driver to enter a unique code using the buttons on the console or the steering wheel. This can be done manually or remotely using the mobile phone app and the code can be modified by the vehicle's owner at any time. The device also functions quietly and is undetectable to thieves because it does not emit radio frequency.

Ghost immobilisers connect directly to the vehicle's CAN bus, a network that connects to all of the vehicle's electronic control units (ECUs). It intercepts signals sent by ECUs, and blocks the engine if a false one is detected. The system is weatherproof and tamperproof. It doesn't have any LED indicators or keys to draw thieves' attention.

It can be placed behind or in a less visible area to ensure that it isn't easily spotted by thieves and does not interfere with vehicle's performance. It can even be mounted inside a small, compact box and makes it less likely to be spotted during the test drive by unscrupulous car salespeople.

Its discrete operation and integration with the vehicle's CAN bus system makes it an effective deterrent against modern methods of theft, such as key cloning and signal relay attacks. The system can be combined with other security measures to create a powerful barrier that will frustrate even the most obstinate thieves. This is why more and more insurance companies are now recommending or even requiring ghost immobilisers be installed, since they can drastically reduce the cost of insurance.

Making the Connections

Ghost immobilisers are silent, unlike traditional security systems that can be heard by thieves. They prevent thieves from knowing that your car is on. They also block high-tech methods used to steal vehicles like OBD port hacking. Installing them without leaving permanent marks on your car is an excellent option for those who plan to sell their vehicle in the near-future.

The Autowatch Ghost 2 is a immobiliser for CANbus that is one of the most reliable and advanced solutions to protect your car from theft. It disables your engine using the CAN data network and generates a unique PIN number that is difficult for criminals. It can be used on many different automobiles, and it can work with all the features that are already in place, such as car alarms, steering wheel locks, GPS trackers and door lock bypass.

If you decide to opt for a Ghost immobiliser, be sure to refer to the wiring diagram of your specific vehicle model to identify the wires to connect. Double-check the locations of these wires to ensure their accuracy and mark them using tape or labels to help you keep the track of them. You will also need to locate a source of continuous power (12V) and a grounding point for the system. Once you have all the components, you can start making the connections to complete the installation.

The ghost immobiliser will not allow your vehicle to start until you enter a pin code via the buttons on the steering wheel or dashboard. This will stop ECU cloning and other methods of theft of vehicles. In addition, it can be combined with other Thatcham-approved security accessories, such as alarms and tyre clamps to give your car an even greater degree of security.

As the UK automotive aftermarket industry expands, so do the options to secure your vehicle. With so many avenues for thieves to break in and steal your car, it's vital to do everything you can to prevent it from being stolen. That's why ghost immobilisers have become an extremely popular option for responsible car owners.

Testing the System

The Ghost Immobiliser communicates with the vehicle's ECU via the CAN network. This prevents the engine from being started until the PIN code is entered. This makes it very difficult for thieves to copy your key fob to open your vehicle, and harder to disable the system by hacking its electronic.

Ghost Immobilisers can also be used with GPS tracking devices to help you locate your vehicle in the event that it's stolen. This feature is not an everyday feature in security products sold by the aftermarket however it's an excellent option to increase your security and provide peace of mind knowing that your vehicle is always secure.

The Ghost-II immobiliser offers not only an enhanced security, but also a pleasant experience for the user by not having to use additional key fobs or devices. It is simple and intuitive PIN code entry that integrates seamlessly with your everyday routine. It also offers modes of deactivation and other features that allow you to temporarily disable the immobiliser to allow valet parking or servicing.


Before beginning the installation process, you should familiarize yourself with the vehicle's wiring and prepare the tools. A basic set of hand tools will allow you the flexibility to make precise connections, and a multimeter is a great tool to determine electrical values. Insulation tape and heat-shrink tubing are essential to safeguard connections from short circuits. Cable ties can also be used to secure wiring. Additionally, it is essential to work in a well-lit location and wear appropriate safety gear when working with electrical and tool components.

You should test the Ghost immobiliser after you have completed the installation to verify that it is working properly. First, you should try to start the vehicle without entering the PIN code. If this fails, you'll have to test the system again and perform a more thorough inspection of the connections.

The Ghost Immobiliser, unlike other security systems is a covert device that is not able to be identified by thieves. It is also more efficient than physical deterrents, such as wheel clamps and steering locks. It is TASSA-approved and recognized by some insurance companies. This makes it a cost-effective investment that will give you the peace of heart you deserve.

Edit

Pub: 11 Dec 2024 17:52 UTC

Views: 8